Merge tag 'omap-for-v3.15/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical

Merge "omap fixes for v3.15 merge window" from Tony Lindgren:

Fixes for omaps that would be good to get in before v3.15-rc1.

* tag 'omap-for-v3.15/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: hwmod data: correct the idlemodes for spinlock
  ARM: dts: am33xx: correcting dt node unit address for usb
  ARM: dts: omap4/5: Use l3_ick for the gpmc node
  CLK: TI: OMAP4/5/DRA7: Remove gpmc_fck from dummy clocks
  ARM: OMAP4: Fix definition of IS_PM44XX_ERRATUM
  ARM: OMAP2+: INTC: Acknowledge stuck active interrupts

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

6 files changed, 23 insertions, 22 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 9d2dedadf2df..cda25ac45b47 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -85,7 +85,7 @@ MODULE_FIRMWARE(FW_RV2P_FILE_09_Ax);
 
 static int disable_msi = 0;
 
-module_param(disable_msi, int, 0);
+module_param(disable_msi, int, S_IRUGO);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
 typedef enum {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 9d7419e0390b..66c0df78c3ff 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -1873,7 +1873,7 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
 }
 
 u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb,
-		       void *accel_priv)
+		       void *accel_priv, select_queue_fallback_t fallback)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 
@@ -1895,7 +1895,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb,
 	}
 
 	/* select a non-FCoE queue */
-	return __netdev_pick_tx(dev, skb) % BNX2X_NUM_ETH_QUEUES(bp);
+	return fallback(dev, skb) % BNX2X_NUM_ETH_QUEUES(bp);
 }
 
 void bnx2x_set_num_queues(struct bnx2x *bp)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 17d1689aec6b..a89a40f88c25 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -496,7 +496,7 @@ int bnx2x_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos);
 
 /* select_queue callback */
 u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb,
-		       void *accel_priv);
+		       void *accel_priv, select_queue_fallback_t fallback);
 
 static inline void bnx2x_update_rx_prod(struct bnx2x *bp,
 					struct bnx2x_fastpath *fp,
@@ -936,7 +936,7 @@ static inline int bnx2x_func_start(struct bnx2x *bp)
 	else /* CHIP_IS_E1X */
 		start_params->network_cos_mode = FW_WRR;
 
-	start_params->gre_tunnel_mode = IPGRE_TUNNEL;
+	start_params->gre_tunnel_mode = L2GRE_TUNNEL;
 	start_params->gre_tunnel_rss = GRE_INNER_HEADERS_RSS;
 
 	return bnx2x_func_state_change(bp, &func_params);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c9c445e7b4a5..7d4382286457 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -95,29 +95,29 @@ MODULE_FIRMWARE(FW_FILE_NAME_E1H);
 MODULE_FIRMWARE(FW_FILE_NAME_E2);
 
 int bnx2x_num_queues;
-module_param_named(num_queues, bnx2x_num_queues, int, 0);
+module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO);
 MODULE_PARM_DESC(num_queues,
 		 " Set number of queues (default is as a number of CPUs)");
 
 static int disable_tpa;
-module_param(disable_tpa, int, 0);
+module_param(disable_tpa, int, S_IRUGO);
 MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
 
 static int int_mode;
-module_param(int_mode, int, 0);
+module_param(int_mode, int, S_IRUGO);
 MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
 				"(1 INT#x; 2 MSI)");
 
 static int dropless_fc;
-module_param(dropless_fc, int, 0);
+module_param(dropless_fc, int, S_IRUGO);
 MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
 
 static int mrrs = -1;
-module_param(mrrs, int, 0);
+module_param(mrrs, int, S_IRUGO);
 MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
 
 static int debug;
-module_param(debug, int, 0);
+module_param(debug, int, S_IRUGO);
 MODULE_PARM_DESC(debug, " Default debug msglevel");
 
 struct workqueue_struct *bnx2x_wq;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index aec5ef2ed7ce..e42f48df6e94 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1446,12 +1446,12 @@ static void bnx2x_vf_igu_reset(struct bnx2x *bp, struct bnx2x_virtf *vf)
 	if (vf->cfg_flags & VF_CFG_INT_SIMD)
 		val |= IGU_VF_CONF_SINGLE_ISR_EN;
 	val &= ~IGU_VF_CONF_PARENT_MASK;
-	val |= BP_FUNC(bp) << IGU_VF_CONF_PARENT_SHIFT;	/* parent PF */
+	val |= (BP_ABS_FUNC(bp) >> 1) << IGU_VF_CONF_PARENT_SHIFT;
 	REG_WR(bp, IGU_REG_VF_CONFIGURATION, val);
 
 	DP(BNX2X_MSG_IOV,
-	   "value in IGU_REG_VF_CONFIGURATION of vf %d after write %x\n",
-	   vf->abs_vfid, REG_RD(bp, IGU_REG_VF_CONFIGURATION));
+	   "value in IGU_REG_VF_CONFIGURATION of vf %d after write is 0x%08x\n",
+	   vf->abs_vfid, val);
 
 	bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
 
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index e2ca03e23dc1..3167ed6593b0 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -2609,13 +2609,14 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
 
 	tg3_writephy(tp, MII_CTRL1000, phy9_orig);
 
-	if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &reg32)) {
-		reg32 &= ~0x3000;
-		tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
-	} else if (!err)
-		err = -EBUSY;
+	err = tg3_readphy(tp, MII_TG3_EXT_CTRL, &reg32);
+	if (err)
+		return err;
 
-	return err;
+	reg32 &= ~0x3000;
+	tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
+
+	return 0;
 }
 
 static void tg3_carrier_off(struct tg3 *tp)
@@ -14113,12 +14114,12 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu)
 
 	tg3_netif_stop(tp);
 
+	tg3_set_mtu(dev, tp, new_mtu);
+
 	tg3_full_lock(tp, 1);
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 
-	tg3_set_mtu(dev, tp, new_mtu);
-
 	/* Reset PHY, otherwise the read DMA engine will be in a mode that
 	 * breaks all requests to 256 bytes.
 	 */