ARM: S3C24XX: Merge s3c2442 and s3c2440 machines into mach-s3c2440

Move the pair of machines in arch/arm/mach-s3c2442 into the mach-s3c2440
directory as the S3C2440 and S3C2442 are very close.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

4 files changed, 0 insertions, 755 deletions

diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 8d3811852fc7..4832cd6ccfbc 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -13,25 +13,3 @@ config CPU_S3C2442
 	select CPU_LLSERIAL_S3C2440
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-
-menu "S3C2442 Machines"
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	depends on ARCH_S3C2440
-	select CPU_S3C2442
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select CPU_S3C2442
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-endmenu
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a19113a5769..2a909c6c5798 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -12,7 +12,5 @@ obj-				:=
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C2442)	+= clock.o
 
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
 # Machine support
 
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2442/include/mach/gta02.h
deleted file mode 100644
index 953331d8d56a..000000000000
--- a/arch/arm/mach-s3c2442/include/mach/gta02.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _GTA02_H
-#define _GTA02_H
-
-#include <mach/regs-gpio.h>
-
-/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
-#define GTA02v1_SYSTEM_REV	0x00000310
-#define GTA02v2_SYSTEM_REV	0x00000320
-#define GTA02v3_SYSTEM_REV	0x00000330
-#define GTA02v4_SYSTEM_REV	0x00000340
-#define GTA02v5_SYSTEM_REV	0x00000350
-/* since A7 is basically same as A6, we use A6 PCB ID */
-#define GTA02v6_SYSTEM_REV	0x00000360
-
-#define GTA02_GPIO_n3DL_GSM	S3C2410_GPA(13)	/* v1 + v2 + v3 only */
-
-#define GTA02_GPIO_PWR_LED1	S3C2410_GPB(0)
-#define GTA02_GPIO_PWR_LED2	S3C2410_GPB(1)
-#define GTA02_GPIO_AUX_LED	S3C2410_GPB(2)
-#define GTA02_GPIO_VIBRATOR_ON	S3C2410_GPB(3)
-#define GTA02_GPIO_MODEM_RST	S3C2410_GPB(5)
-#define GTA02_GPIO_BT_EN	S3C2410_GPB(6)
-#define GTA02_GPIO_MODEM_ON	S3C2410_GPB(7)
-#define GTA02_GPIO_EXTINT8	S3C2410_GPB(8)
-#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB(9)
-
-#define GTA02_GPIO_PIO5		S3C2410_GPC(5)	/* v3 + v4 only */
-
-#define GTA02v3_GPIO_nG1_CS	S3C2410_GPD(12)	/* v3 + v4 only */
-#define GTA02v3_GPIO_nG2_CS	S3C2410_GPD(13)	/* v3 + v4 only */
-#define GTA02v5_GPIO_HDQ	S3C2410_GPD(14)   /* v5 + */
-
-#define GTA02_GPIO_nG1_INT	S3C2410_GPF(0)
-#define GTA02_GPIO_IO1		S3C2410_GPF(1)
-#define GTA02_GPIO_PIO_2	S3C2410_GPF(2)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_JACK_INSERT	S3C2410_GPF(4)
-#define GTA02_GPIO_WLAN_GPIO1	S3C2410_GPF(5)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_AUX_KEY	S3C2410_GPF(6)
-#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF(7)
-
-#define GTA02_GPIO_3D_IRQ	S3C2410_GPG(4)
-#define GTA02v2_GPIO_nG2_INT	S3C2410_GPG(8)	/* v2 + v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_OC	S3C2410_GPG(9)	/* v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_FLT	S3C2410_GPG(10)	/* v3 + v4 only */
-#define GTA02v3_GPIO_nGSM_OC	S3C2410_GPG(11)	/* v3 + v4 only */
-
-#define GTA02_GPIO_AMP_SHUT	S3C2440_GPJ1	/* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10	S3C2440_GPJ2
-#define GTA02_GPIO_HP_IN	S3C2440_GPJ2	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0		S3C2440_GPJ3	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN	S3C2440_GPJ4
-#define GTA02_GPIO_3D_RESET	S3C2440_GPJ5
-#define GTA02_GPIO_nDL_GSM	S3C2440_GPJ6	/* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0	S3C2440_GPJ7
-#define GTA02v1_GPIO_BAT_ID	S3C2440_GPJ8
-#define GTA02_GPIO_KEEPACT	S3C2440_GPJ8
-#define GTA02v1_GPIO_HP_IN	S3C2440_GPJ10
-#define GTA02_CHIP_PWD		S3C2440_GPJ11	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET	S3C2440_GPJ12	/* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_GSENSOR_1	IRQ_EINT0
-#define GTA02_IRQ_MODEM		IRQ_EINT1
-#define GTA02_IRQ_PIO_2		IRQ_EINT2	/* v2 + v3 + v4 only */
-#define GTA02_IRQ_nJACK_INSERT	IRQ_EINT4
-#define GTA02_IRQ_WLAN_GPIO1	IRQ_EINT5
-#define GTA02_IRQ_AUX		IRQ_EINT6
-#define GTA02_IRQ_nHOLD		IRQ_EINT7
-#define GTA02_IRQ_PCF50633	IRQ_EINT9
-#define GTA02_IRQ_3D		IRQ_EINT12
-#define GTA02_IRQ_GSENSOR_2	IRQ_EINT16	/* v2 + v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_OC	IRQ_EINT17	/* v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_FLT	IRQ_EINT18	/* v3 + v4 only */
-#define GTA02v3_IRQ_nGSM_OC	IRQ_EINT19	/* v3 + v4 only */
-
-/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
-#define GTA02_PCB_ID1_0		S3C2410_GPC(13)
-#define GTA02_PCB_ID1_1		S3C2410_GPC(15)
-#define GTA02_PCB_ID1_2		S3C2410_GPD(0)
-#define GTA02_PCB_ID2_0		S3C2410_GPD(3)
-#define GTA02_PCB_ID2_1		S3C2410_GPD(4)
-
-int gta02_get_pcb_revision(void);
-
-#endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
deleted file mode 100644
index 45799c608d8f..000000000000
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ /dev/null
@@ -1,647 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
- * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
- *
- * Copyright (C) 2006-2009 by Openmoko, Inc.
- * Authors: Harald Welte <laforge@openmoko.org>
- *          Andy Green <andy@openmoko.org>
- *          Werner Almesberger <werner@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mmc/host.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <linux/i2c.h>
-#include <linux/backlight.h>
-#include <linux/regulator/machine.h>
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/fb.h>
-
-#include <mach/spi.h>
-#include <mach/spi-gpio.h>
-#include <plat/usb-control.h>
-#include <mach/regs-mem.h>
-#include <mach/hardware.h>
-
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/udc.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-
-static struct pcf50633 *gta02_pcf;
-
-/*
- * This gets called every 1ms when we paniced.
- */
-
-static long gta02_panic_blink(long count)
-{
-	long delay = 0;
-	static long last_blink;
-	static char led;
-
-	/* Fast blink: 200ms period. */
-	if (count - last_blink < 100)
-		return 0;
-
-	led ^= 1;
-	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
-
-	last_blink = count;
-
-	return delay;
-}
-
-
-static struct map_desc gta02_iodesc[] __initdata = {
-	{
-		.virtual	= 0xe0000000,
-		.pfn		= __phys_to_pfn(S3C2410_CS3 + 0x01000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg gta02_uartcfgs[] = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-};
-
-#ifdef CONFIG_CHARGER_PCF50633
-/*
- * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
- * We use this to recognize that we can pull 1A from the USB socket.
- *
- * These constants are the measured pcf50633 ADC levels with the 1A
- * charger / 48K resistor, and with no pulldown resistor.
- */
-
-#define ADC_NOM_CHG_DETECT_1A 6
-#define ADC_NOM_CHG_DETECT_USB 43
-
-static void
-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
-{
-	int  ma;
-
-	/* Interpret charger type */
-	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
-
-		/*
-		 * Sanity - stop GPO driving out now that we have a 1A charger
-		 * GPO controls USB Host power generation on GTA02
-		 */
-		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
-
-		ma = 1000;
-	} else
-		ma = 100;
-
-	pcf50633_mbc_usb_curlim_set(pcf, ma);
-}
-
-static struct delayed_work gta02_charger_work;
-static int gta02_usb_vbus_draw;
-
-static void gta02_charger_worker(struct work_struct *work)
-{
-	if (gta02_usb_vbus_draw) {
-		pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
-		return;
-	}
-
-#ifdef CONFIG_PCF50633_ADC
-	pcf50633_adc_async_read(gta02_pcf,
-				PCF50633_ADCC1_MUX_ADCIN1,
-				PCF50633_ADCC1_AVERAGE_16,
-				gta02_configure_pmu_for_charger,
-				NULL);
-#else
-	/*
-	 * If the PCF50633 ADC is disabled we fallback to a
-	 * 100mA limit for safety.
-	 */
-	pcf50633_mbc_usb_curlim_set(pcf, 100);
-#endif
-}
-
-#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
-
-static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
-{
-	if (irq == PCF50633_IRQ_USBINS) {
-		schedule_delayed_work(&gta02_charger_work,
-				      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-
-		return;
-	}
-
-	if (irq == PCF50633_IRQ_USBREM) {
-		cancel_delayed_work_sync(&gta02_charger_work);
-		gta02_usb_vbus_draw = 0;
-	}
-}
-
-static void gta02_udc_vbus_draw(unsigned int ma)
-{
-	if (!gta02_pcf)
-		return;
-
-	gta02_usb_vbus_draw = ma;
-
-	schedule_delayed_work(&gta02_charger_work,
-			      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-}
-#else /* !CONFIG_CHARGER_PCF50633 */
-#define gta02_pmu_event_callback	NULL
-#define gta02_udc_vbus_draw		NULL
-#endif
-
-/*
- * This is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device. Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent. This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-
-
-static char *gta02_batteries[] = {
-	"battery",
-};
-
-struct pcf50633_platform_data gta02_pcf_pdata = {
-	.resumers = {
-		[0] =	PCF50633_INT1_USBINS |
-			PCF50633_INT1_USBREM |
-			PCF50633_INT1_ALARM,
-		[1] =	PCF50633_INT2_ONKEYF,
-		[2] =	PCF50633_INT3_ONKEY1S,
-		[3] =	PCF50633_INT4_LOWSYS |
-			PCF50633_INT4_LOWBAT |
-			PCF50633_INT4_HIGHTMP,
-	},
-
-	.batteries = gta02_batteries,
-	.num_batteries = ARRAY_SIZE(gta02_batteries),
-
-	.charger_reference_current_ma = 1000,
-
-	.reg_init_data = {
-		[PCF50633_REGULATOR_AUTO] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-		},
-		[PCF50633_REGULATOR_DOWN1] = {
-			.constraints = {
-				.min_uV = 1300000,
-				.max_uV = 1600000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN2] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.always_on = 1,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-		},
-		[PCF50633_REGULATOR_HCLDO] = {
-			.constraints = {
-				.min_uV = 2000000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-				.always_on = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO1] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.state_mem = {
-					.enabled = 0,
-				},
-			},
-		},
-		[PCF50633_REGULATOR_LDO2] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO3] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO4] = {
-			.constraints = {
-				.min_uV = 3200000,
-				.max_uV = 3200000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO5] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-		},
-		[PCF50633_REGULATOR_LDO6] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-		[PCF50633_REGULATOR_MEMLDO] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-		},
-
-	},
-	.probe_done = gta02_pmu_attach_child_devices,
-	.mbc_event_callback = gta02_pmu_event_callback,
-};
-
-
-/* NOR Flash. */
-
-#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
-#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
-
-static struct physmap_flash_data gta02_nor_flash_data = {
-	.width		= 2,
-};
-
-static struct resource gta02_nor_flash_resource = {
-	.start		= GTA02_FLASH_BASE,
-	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gta02_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gta02_nor_flash_data,
-	},
-	.resource	= &gta02_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-
-struct platform_device s3c24xx_pwm_device = {
-	.name		= "s3c24xx_pwm",
-	.num_resources	= 0,
-};
-
-static struct i2c_board_info gta02_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf50633", 0x73),
-		.irq = GTA02_IRQ_PCF50633,
-		.platform_data = &gta02_pcf_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8753", 0x1a),
-	},
-};
-
-static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
-	[0] = {
-		/*
-		 * This name is also hard-coded in the boot loaders, so
-		 * changing it would would require all users to upgrade
-		 * their boot loaders, some of which are stored in a NOR
-		 * that is considered to be immutable.
-		 */
-		.name		= "neo1973-nand",
-		.nr_chips	= 1,
-		.flash_bbt	= 1,
-	},
-};
-
-/*
- * Choose a set of timings derived from S3C@2442B MCP54
- * data sheet (K5D2G13ACM-D075 MCP Memory).
- */
-
-static struct s3c2410_platform_nand __initdata gta02_nand_info = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
-	.sets		= gta02_nand_sets,
-};
-
-
-static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
-{
-	switch (cmd) {
-	case S3C2410_UDC_P_ENABLE:
-		pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
-		break;
-	case S3C2410_UDC_P_DISABLE:
-		pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
-		break;
-	case S3C2410_UDC_P_RESET:
-		pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
-		/* FIXME: Do something here. */
-	}
-}
-
-/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg = {
-	.vbus_draw	= gta02_udc_vbus_draw,
-	.udc_command	= gta02_udc_command,
-
-};
-
-
-
-static void gta02_bl_set_intensity(int intensity)
-{
-	struct pcf50633 *pcf = gta02_pcf;
-	int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-
-	/* We map 8-bit intensity to 6-bit intensity in hardware. */
-	intensity >>= 2;
-
-	/*
-	 * This can happen during, eg, print of panic on blanked console,
-	 * but we can't service i2c without interrupts active, so abort.
-	 */
-	if (in_atomic()) {
-		printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
-		return;
-	}
-
-	old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-	if (intensity == old_intensity)
-		return;
-
-	/* We can't do this anywhere else. */
-	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
-
-	if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
-		old_intensity = 0;
-
-	/*
-	 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
-	 * if seen, you have to re-enable the LED unit.
-	 */
-	if (!intensity || !old_intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
-
-	/* Illegal to set LEDOUT to 0. */
-	if (!intensity)
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
-	else
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
-					  intensity);
-
-	if (intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
-
-}
-
-static struct generic_bl_info gta02_bl_info = {
-	.name			= "gta02-bl",
-	.max_intensity		= 0xff,
-	.default_intensity	= 0xff,
-	.set_bl_intensity	= gta02_bl_set_intensity,
-};
-
-static struct platform_device gta02_bl_dev = {
-	.name			= "generic-bl",
-	.id			= 1,
-	.dev = {
-		.platform_data = &gta02_bl_info,
-	},
-};
-
-
-
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info __initdata = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED,
-	},
-	.port[1]	= {
-		.flags	= 0,
-	},
-};
-
-
-static void __init gta02_map_io(void)
-{
-	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
-}
-
-
-/* These are the guys that don't need to be children of PMU. */
-
-static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&s3c_device_nand,
-	&gta02_nor_flash,
-	&s3c24xx_pwm_device,
-	&s3c_device_iis,
-	&s3c_device_i2c0,
-};
-
-/* These guys DO need to be children of PMU. */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-	&gta02_bl_dev,
-};
-
-
-/*
- * This is called when pc50633 is probed, quite late in the day since it is an
- * I2C bus device.  Here we can define platform devices with the advantage that
- * we can mark the pcf50633 as the parent.  This makes them get suspended and
- * resumed with their parent the pcf50633 still around.  All devices whose
- * operation depends on something from pcf50633 must have this relationship
- * made explicit like this, or suspend and resume will become an unreliable
- * hellworld.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
-	int n;
-
-	/* Grab a copy of the now probed PMU pointer. */
-	gta02_pcf = pcf;
-
-	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
-		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
-	platform_add_devices(gta02_devices_pmu_children,
-			     ARRAY_SIZE(gta02_devices_pmu_children));
-}
-
-static void gta02_poweroff(void)
-{
-	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
-}
-
-static void __init gta02_machine_init(void)
-{
-	/* Set the panic callback to make AUX LED blink at ~5Hz. */
-	panic_blink = gta02_panic_blink;
-
-	s3c_pm_init();
-
-#ifdef CONFIG_CHARGER_PCF50633
-	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
-#endif
-
-	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
-	s3c_ohci_set_platdata(&gta02_usb_info);
-	s3c_nand_set_platdata(&gta02_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
-
-	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
-	pm_power_off = gta02_poweroff;
-}
-
-
-MACHINE_START(NEO1973_GTA02, "GTA02")
-	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-	.map_io		= gta02_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= gta02_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END