path: root/NEWS

SyncEvolution 1.3.99.7, 22.01.2014
==================================

Final release candidate for 1.4. No further changes planned unless
new problems are found.

Details:

* SSO: support Ubuntu Online Accounts

  When compiling from source on recent Ubuntu it becomes possible to
  use Ubuntu Online Accounts for authenticating against Google's
  CalDAV and CardDAV servers.

* D-Bus server: fix abort when mixing auto-sync and manual operations (FDO #73562)

  When enabling auto-sync for a config and then accessing or syncing the
  config manually via the command line tool, the server would abort at
  the time when the auto-sync was originally scheduled.

* D-Bus server: accept WBXML with charset in incoming connections

  A user reported via email that the Nokia 515 sends
  'application/vnd.syncml+wbxml; charset=UTF-8' as type of its messages
  this tripped up the syncevo-http-server, leading to:

    [ERROR] syncevo-dbus-server: /org/syncevolution/Server: message type 'application/vnd.syncml+wbxml; charset=UT

  We need to strip the '; charset=UTF-8' suffix also when checking for
  WBXML.

* packaging: compatible with EDS up to and including 3.10

  The packages now contain three versions of syncecal.so:
    - one for EDS < 3.6
    - one for EDS >= 3.6 < 3.10
    - one for EDS >= 3.10 with the libecal-1.2 soname patched

  The third flavor became necessary because EDS 3.10 accidentally
  changed the soname. The API and ABI actually is the same.

  Package meta-data was fixed to reflect the extended range of
  compatible EDS libraries, so syncevolution-evolution can be installed
  again with recent EDS.

* packaging: update syncevolution-kde dependencies

  kdebase-runtime became kde-runtime in Debian Wheezy. Accept both
  as prerequisite of syncevolution-kde to allow installation on
  newer distros without pulling in the transitional kdebase-runtime
  package.

* packaging: fix rpm (FDO #73347)

  After installing the syncevolution.org rpm on OpenSUSE,
  SyncEvolution was not starting because its shared libraries were not
  found unless "ldconfig" was called manually. Now the package does
  that automatically.

* packaging: fix description

  The syncevolution-bundle description of both rpm and deb
  packagesaccidentally used the same description as
  syncevolution-evolution.


* test improvements, integration of cppcheck and clang's scan-build


SyncEvolution 1.3.99.6, 04.12.2013
==================================

This update focuses on SyncEvolution in IVI again. It adds support for
GENIVI Diagnostic Log and Trace (DLT) and enhances searching in the
unified address book.

The biggest change for normal Linux desktop users is enhanced support
for recent distros. Binaries on syncevolution.org now work with EDS >=
3.6 *and* < 3.6. Distros with libical1 like Ubuntu Saucy are also
supported. Automated testing was updated to cover these newer
platforms more thoroughly.


Details:

* GNOME Online Accounts: fix D-Bus problem in syncevolution.org binaries

  Support was included in syncevolution.org binaries, but was not
  tested and did not actually work due to some issue accessing
  the D-Bus session.

* libsynthesis: partial fix batching of items

  The batching of contact writes introduced with SyncEvolution
  1.3.99.4 caused problems with non-SyncEvolution SyncML peers when
  syncing contacts stored in EDS >= 3.6. EDS < 3.6 was not affected.

  That part is fixed. However, even in SyncEvolution<->SyncEvolution
  syncs another crash was found. This will require more investigation.
  Clearly the feature is not ready yet for general sync, so for now
  it is disabled by default and only enabled in the simpler PBAP
  sync.

* libsynthesis: avoid redundant (and sometimes slow) getaddrbyname() (FDO #70771)

  The network lookup of the hostname can be slow (10 second delay when
  not connected) and shouldn't be necessary anyway, so disable it.

* PIM Manager: case-insensitive and transliterated search (FDO #56524)

* PIM: accent-insensitive and transliterated search (FDO #56524)

  Accent-insensitive search ignores accents, using the same code as in
  EDS.  Transliterated search ignores foreign scripts by transliterating
  search term and contact properties to Latin first. That one is using
  ICU directly in the same way as EDS, but doesn't use the EDS
  ETransliterator class to avoid extra string copying.

  This commit changes the default behavior such that searching is by
  default most permissive (case- and accent-insensitive, does
  transliteration). Flags exist to restore more restrictive matching.

* PIM: relax phone number matching

  Previously, the current default country was used to turn phone numbers
  without an explicit country code into full E164 numbers, which then
  had to match the search term when doing a caller ID lookup.

  This was inconsistent with EDS, where a weaker
  EQUALS_NATIONAL_PHONE_NUMBER was done. The difference is that a
  comparison between a number with country code matches one without if
  the national number of the same, regardless of the current default
  country. This is better because it reduces the influence of the hard
  to guess default country on matching.

  Another advantage of this change is the lower memory consumption and
  faster comparison, because strings are now stored in 4 + 8 byte
  numbers instead of strings of varying length.

* PIM: fix incorrect write into pim-manager.ini (FDO #70772)

  Removing a peer accidentally wrote the updated list of active
  address books into the "sort" property of pim-manager.ini, which
  then prevented starting the PIM Manager.

* PIM: ignore broken sort order in config (FDO #70772)

  Failure to set the sort order from pim-manager.ini should not
  prevent the startup of the PIM Manager because the client cannot
  really diagnose and fix the problem. It is better to try again with
  the default sort order.

* PIM: adapt to locale changes at runtime (FDO #66618)

  Listen to signals from localed D-Bus system service and update all
  internal state which depends on the current locale. This state includes:
  - pre-computed data in all loaded contacts
  - filtering (for example, case sensitivity is locale dependent)
  - the sort order

  This feature can be controlled by setting the SYNCEVOLUTION_LOCALED
  env variable:
  - "session" - use a localed instance on the D-Bus session bus instead
    of the system instance. This was originally meant for
    testing, but might also be useful for per-user setting changes.
  - "none" - disables the feature

* PIM: fix sync.py + multiple peers

  Due to overwriting a variable, configuring multiple different
  peers did not work.

* D-Bus server: support DLT (FDO #66769)

  Diagnostic Log and Trace (DLT) manages a sequence of log messages,
  with remote controllable level of detail. SyncEvolution optionally
  (can be chosen at compile time and again at runtime) uses DLT
  instead of its own syncevolution-log.html files. See README-DLT.rst
  for more information.

  To use the feature, configure SyncEvolution with
  "--enable-dbus-server=--dlt --no-syslog"

* EDS: enhanced compatibility mode

  SyncEvolution compiled for EDS < 3.6 can now also load EDS backends
  compiled for EDS >= 3.6. The packaging for syncevolution.org uses
  that to bundle EDS backends compiled on different distros in the
  same package.

* EDS: SYNCEVOLUTION_EBOOK_QUERY env variable

  Setting the SYNCEVOLUTION_EBOOK_QUERY env variable to a valid EBook
  query string limits the results to contacts matching that
  query. Useful only in combination with --print-items or
  --export. Only implemented for EDS >= 3.6.

* EDS: fix compile problem with boost and EDS > 3.36

  This fixes the following problem, seen with Boost 1.53.0 on altlinux
  when compiling for EDS >= 3.6:

    /usr/include/boost/smart_ptr/shared_ptr.hpp: In instantiation of 'typename boost::detail::sp_array_access<T>::type boost::shared_ptr<T>::operator[](std::ptrdiff_t) const [with T = char*; typename boost::detail::sp_array_access<T>::type = void; std::ptrdiff_t = long int]':
    src/backends/evolution/EvolutionSyncSource.cpp:163:38: required from here
    /usr/include/boost/smart_ptr/shared_ptr.hpp:663:22: error: return-statement with a value, in function returning 'void' [-fpermissive]
    make[2]: *** [src/backends/evolution/src_backends_evolution_syncecal_la-EvolutionSyncSource.lo]

* PBAP: add support for obexd 0.48

  obexd 0.48 is almost the same as obexd 0.47, except that it dropped
  the SetFilter and SetFormat methods in favor of passing a Bluex 5-style
  filter parameter to PullAll.

  SyncEvolution now supports 4, in words, four different obexd
  APIs. Sigh.

  This feature was originally announced for SyncEvolution 1.3.99.5,
  but not actually included in the code yet.


SyncEvolution 1.3.99.5, 01.10.2013
==================================

SyncEvolution now supports Google CalDAV/CardDAV with OAuth2
authentication. These are the open protocol that Google currently
supports and thus the recommended way of syncing with Google,
replacing ActiveSync and SyncML (both no longer available to all
Google customers).

Support for Google CardDAV is new. Because of a vCard encoding issue
on the server side, spaces in long notes may get removed. Like
Evolution, SyncEvolution does not yet support some of the advanced
features of the server, in particular custom labels for phone numbers,
emails and addresses. Likewise, some client properties are not
supported by the server: CALURI, CATEGORIES, FBURL, GEO and ROLE are
not supported. Of ORG, only the first two components are supported.
Currently, properties not supported by one side get lost in a full
roundtrip sync.

SyncEvolution depends on external components for OAuth2. It can be
compiled to use gSSO [1] or GNOME Online Accounts. GNOME Online
Accounts >= 3.10 works out of the box for CalDAV and CardDAV, 3.8 only
for CardDAV (but the GNOME Online Accounts binary can be patched to
also support CalDAV, see [2]), anything older than 3.8 does not
work. Support for Ubuntu Online Accounts should not be hard to add,
but is not available yet [3].

[1] https://01.org/gsso and
    http://cgit.freedesktop.org/SyncEvolution/syncevolution/plain/src/backends/signon/README
[2] http://cgit.freedesktop.org/SyncEvolution/syncevolution/plain/src/backends/goa/README
[3] http://thread.gmane.org/gmane.comp.mobile.syncevolution/4353/focus=4490


Details:

* GTK UI: fixed two crashes - running a sync with no service selected
  and a 64 bit pointer problem recently discovered by Tino Keitel when
  compiling the Debian package with -fPIE.

* password handling: fix usage of GNOME Keyring and KWallet (FDO #66110)

  When clients like the GTK sync-ui stored a password, it was always
  stored as plain text in the config.ini file by the
  syncevo-dbus-server. The necessary code for redirecting the password
  storage in a keyring (GNOME or KWallet) simply wasn't called in that
  case.

  The command line tool, even when using the D-Bus server to run the
  operation, had the necessary code active and thus was not affected.
  Now all SyncEvolution components use the same default: use safe
  password storage if either GNOME Keyring or KWallet were enabled
  during compilation, don't use it if not.

  Fixing this revealed other problems, like not being able to store
  certain passwords that lacked the necessary lookup criteria (like
  syncURL and/or username). To address this, the lookup criteria where
  extended and a new check was added to avoid accidentally removing
  other passwords. As a result, it may be possible that SyncEvolution
  no longer finds passwords that were stored with older versions of
  SyncEvolution. In such a case the passwords must be set again.

* GNOME: clean up keyring access and require libgnome-keyring >= 2.20

  The updated error messages now always include information about the
  password and libgnome-keyring error texts.

  A workaround is used for the "Error communicating with
  gnome-keyring-daemon" problem that started to appear fairly
  frequently in the automated testing once the keyring was actually
  used. The problem shows up with some additional debug messages:

    Gkr: received an invalid, unencryptable, or non-utf8 secret
    Gkr: call to daemon returned an invalid response: (null).(null)()

  It seems that sometimes setting up a session with GNOME keyring
  fails such that all further communication leads to decoding problem.

  There is an internal method to reset the session, but it cannot be
  called directly. As a workaround, fake the death of the GNOME
  keyring daemon and thus trigger a reconnect when retrying the GNOME
  keyring access. This is done by sending a D-Bus message, which will
  also affect other clients of GNOME keyring, but hopefully without
  user-visible effects.

* config: enhanced password handling

  It is possible to configure a plain username/password combination
  once in SyncEvolution and then use references to it in other
  configurations, instead of having to set (and update) the
  credentials in different places. This is useful in particular with
  WebDAV, where credentials had to be repeated several times (target
  config, in each database when used as part of SyncML) or when using
  a service which requires several configs (Google via SyncML and
  CalDAV).

  To use this, create a sync config for a normal peer or a dedicated
  config just for the credentials, with "username/password/syncURL"
  set. The "syncURL" must be set to something identifying the peer if
  GNOME Keyring is used for the password storage.

  Then set "username", "databaseUser" and "proxyUser" properties to
  "id:<name of config with credentials>" and all read and write access
  to those properties will be redirected by SyncEvolution into that
  other configuration. This even works in the GTK UI.

  For user names which contain colons, the new "user:<user name>" format
  must be used. Strings without colons are assumed to be normal user
  names, so most old configurations should continue to work.

* signon: new backend using libgsignond-glib + libaccounts-glib

  The code works with gSSO (https://01.org/gsso). With some tweaks to
  the configure check and some ifdefs it probably could be made to work
  with Ubuntu Online Accounts.

  The code depends on an account accessible via libaccounts-glib which
  has a provider and and (optionally) services enabled for that
  provider. It is not necessary that the account already has a signon
  identity ID, the backend will create that for the provider (and thus
  shared between all services) if necessary.

  Therefore it is possible to use the ag-tool to create and enable the
  account and services. Provider and service templates are in the next
  commit.

* WebDAV: support OAuth2

  If given an authentication configuration which can handle OAuth2,
  then OAuth2 is used instead of plain username/password
  authentication.

* WebDAV: support Google CardDAV, break Yahoo

  Google CardDAV has one peculiarity: it renames new contacts during PUT without
  returning the new path to the client. See also
  http://lists.calconnect.org/pipermail/caldeveloper-l/2013-July/000524.html

  SyncEvolution already had a workaround for that (PROPGET on old path, extract
  new path from response) which happened to work. This workaround was originally
  added for Yahoo, which sometimes merges contacts into existing ones. In
  contrast to Yahoo, Google really seems to create new items.

  Without some server specific hacks, the client cannot tell what happened.
  Because Google is currently supported and Yahoo is not, let's change the
  hard-coded behavior to "renamed items are new".

* WebDAV: started testing with owndrive.com = OwnCloud

* GOA: get OAuth2 tokens out of GNOME Online Accounts

  "username = goa:..." selects an account in GOA and retrieves the
  OAuth2 token from that.

  The implementation uses the GOA D-Bus API directly, because our C++
  D-Bus bindings are easier to use and this avoids an additional library
  dependency.

* PIM: fix UID usage in sync.py example

  Using the underscore in the UID has been wrong all along, it only
  happened to work because UID sanity checking was missing. After adding
  it, the example broke.

  Now simply remove the colon. It makes the UID less readable, but it
  doesn't have to be, and ensures that file names and database names
  contain the UID as-is.

* PIM: if busy, don't shut down

  While there are sessions pending or active, the server should not shut down.
  It did that while executing a long-running PIM Manager SyncPeer() operations,
  by default after 10 minutes.

  This was not a problem elsewhere because other operations are associated with
  a client, whose presence also prevents shutdowns. Perhaps PIM Manager should
  also track the caller and treat it like a client.

* PBAP: do not end Bluez5 transfer prematurely

  A transfer was marked as finished prematurely when encountering the
  "active" Status value, which can happen for longer transfers.

* updated tests


Upgrading from releases <= 1.3.99.4:

If the value of "username/databaseUser/proxyUser" contains a colon,
the "user:" prefix must be added to the value, to continue treating it
like a plain user name and not some reference to an unknown identity
provider (like "id:", "goa:", "signon:", etc.).

The lookup of passwords in GNOME Keyring was updated slightly in
1.3.99.5. It may be necessary to set passwords anew if the old one is
no longer found.

Upgrading from release 1.2.x:

The sync format of existing configurations for Mobical (aka Everdroid)
must be updated manually, because the server has encoding problems when
using vCard 3.0 (now the default for Evolution contacts):
   syncevolution --configure \
                 syncFormat=text/x-vcard \
                 mobical addressbook

The Funambol template explicitly enables usage of the
"refresh-from-server" sync mode to avoid getting throttled with 417
'retry later' errors. The same must be added to existing configs
manually:
   syncevolution --configure \
                 enableRefreshSync=TRUE \
                 funambol

Upgrading from releases before 1.2:

Old configurations can still be read. But writing, as it happens
during a sync, must migrate the configuration first. Releases >= 1.2
automatically migrates configurations. The old configurations
will still be available (see "syncevolution --print-configs") but must
be renamed manually to use them again under their original names with
older SyncEvolution releases.


SyncEvolution 1.3.99.4, 12.07.2013
==================================

The focus of this development snapshot is enhanced performance of
syncing. With EDS, contacts get added, updated or loaded with batch
operations, which led to 4x runtime improvements when importing PBAP
address book for the first time. Removing unnecessary work from any
following PBAP sync led to more than a 6x improvement.

These improvements also benefit non-PBAP syncing and could in theory
work with any SyncML peer. In practice, batching of items is currently
limited to SyncEvolution as peer.

The PBAP backend itself was rewritten such that data gets transferred
from a phone in parallel to processing the already transferred
data. The effect is that on a sufficiently fast system, a sync takes
about the same time as downloading all contacts. To get the text-only
part of the contacts even faster, PBAP syncing can be done such that
it first syncs the text-only parts (without removing existing photos),
then in a second round adds or modifies photos. The PIM Manager uses
this incremental mode by default, in the command line it can be chose
with the SYNCEVOLUTION_PBAP_SYNC env variable.

The HTTP server became better at handling message resends when the
server is slow with processing a message. The server is able to keep a
sync session alive while loading the initial data set by sending
acknowledgement replies before the client times out.

Guido Günther provided some patches addressing problems when compiling
SyncEvolution for Maemo.


Details:

* sync: less verbose output, shorter runtime

  For each incoming change, one INFO line with "received x[/out of y]"
  was printed, immediately followed by another line with total counts
  "added x, updated y, removed z". For each outgoing change, a "sent
  x[/out of y]" was printed.

  In addition, these changes were forwarded to the D-Bus server where a
  "percent complete" was calculated and broadcasted to clients. All of
  that caused a very high overhead for every single change, even if the
  actual logging was off. The syncevo-dbus-server was constantly
  consuming CPU time during a sync when it should have been mostly idle.

  To avoid this overhead, the updated received/sent numbers that come
  from the Synthesis engine are now cached and only processed when done
  with a SyncML message or some other event happens (whatever happens
  first).

  To keep the implementation simple, the "added x, updated y, removed z"
  information is ignored completely and no longer appears in the output.

* HTTP server: handle message resends

  If a client gave up waiting for the server's response and resent its message
  while the server was still processing the message, syncing failed with
  "protocol error: already processing a message" raised by the
  syncevo-dbus-server because it wasn't prepared to handle that situation.

  The right place to handle this is inside the syncevo-http-server, because it
  depends on the protocol (HTTP in this case) whether resending is valid or
  not. It handles that now by tracking the message that is currently in
  processing and matching it against each new message. If it matches, the new
  request replaces the obsolete one without sending the message again to
  syncevo-dbus-server. When syncevo-dbus-server replies to the old message, the
  reply is used to finish the newer request.

* PBAP: incremental sync (FDO #59551)

  Depending on the SYNCEVOLUTION_PBAP_SYNC env variable, syncing reads
  all properties as configured ("all"), excludes photos ("text") or
  first text, then all ("incremental").

  When excluding photos, only known properties get requested. This
  avoids issues with phones which reject the request when enabling
  properties via the bit flags. This also helps with
  "databaseFormat=^PHOTO".

* PIM: use incremental sync for PBAP by default (FDO #59551)

  When doing a PBAP sync, PIM manager asks the D-Bus sync helper to set
  its SYNCEVOLUTION_PBAP_SYNC to "incremental". If the env variable
  is already set, it does not get overwritten, which allows overriding
  this default.

* PIM: set debug level in peer configs via env variable

  Typically the peer configs get created from scratch, in particular
  when testing with testpim.py. In that case the log level cannot be set
  in advance and doing it via the D-Bus API is also not supported.
  Therefore, for debugging, use SYNCEVOLUTION_LOGLEVEL=<level> to create
  peers with a specific log level.

* PIM: include pim-manager-api.txt in source distro (FDO #62516)

  The text file must be listed explicitly to be included by "make dist".

* PIM: "full name" -> "fullname" fix in documentation (FDO #62515)

  Make the documentation match the code. A single word without
  space makes more sense, so let's go with what the code already
  used.

* PIM: enhanced searching (search part of FDO #64177)

  Search terms now also include 'is/contains/begins-with/ends-with'
  and they can be combined with 'and' and 'or', also recursively.

* PIM: Pinyin sorting for zh languages (part of FDO #64173)

  Full interleaving of Pinyin transliterations of Chinese names with
  Western names can be done by doing an explicit Pinyin transliteration
  as part of computing the sort keys.

  This is done using ICU's Transliteration("Han-Latin"), which we have
  to call directly because boost::locale does not expose that API.

  We hard-code this behavior for all "zh" languages (as identified by
  boost::locale), because by default, ICU would sort Pinyin separately
  from Western names when using the "pinyin" collation.

* PIM: new return value for SyncPeer(), new SyncProgress signal (FDO #63417)

  The SyncPeer() result is derived from the sync statistics. To have
  them available, the "sync done" signal must include the SyncReport.

  Start and end of a sync could already be detected; "modified" signals
  while a sync runs depends on a new signal inside the SyncContext when
  switching from one cycle to the next and at the end of the last one.

* PIM: allow removal of data together with database removal (part of FDO #64835)

  There is a difference in EDS between removing the database definition
  from the ESourceRegistry (which makes the data unaccessible via EDS)
  and removing the actual database. EDS itself only removes the definition
  and leaves the data around to be garbage-collected eventually. This is
  not what we want for the PIM Manager API; the API makes a stronger
  guarantee that data is really gone.

  Fixed by introducing a new mode flag for the deleteDatabase() method
  and deleting the directory of the source directly in the EDS backend,
  if requested by the caller.

  The syncevolution command line tool will use the default mode and thus
  keep the data around, while the PIM Manager forces the removal of
  data.

* EDS: create new databases by cloning the builtin ones (FDO #64176)

  Instead of hard-coding a specific "Backend Summary Setup" in
  SyncEvolution, copy the config of the system database. That way
  special flags (like the desired "Backend Summary Setup" for local
  address books) can be set on a system-wide basis and without having to
  modify or configure SyncEvolution.

  Because EDS has no APIs to clone an ESource or turn a .source file
  into a new ESource, SyncEvolution has to resort to manipulating and
  creating the keyfile directly.

* EDS contacts: update PHOTO+GEO during slow sync, avoid rewriting PHOTO file

  If PHOTO and/or GEO were the only modified properties during a slow
  sync, the updated item was not written into local storage because
  they were marked as compare="never" = "not relevant".

  For PHOTO this was intentional in the sample config, with the
  rationale that local storages often don't store the data exactly as
  requested. When that happens, comparing the data would lead to
  unnecessary writes. But EDS and probably all other local SyncEvolution
  storages (KDE, file) store the photo exactly as requested, so not
  considering changes had the undesirable effect of not always writing
  new photo data.

  For GEO, ignoring it was accidental.

* EDS contacts: avoid unnecessary DB writes during slow sync

  Traditionally, contacts were modified shortly before writing into EDS
  to match with Evolution expectations (must have N, only one CELL TEL,
  VOICE flag must be set). During a slow sync, the engine compare the
  modified contacts with the unmodified, incoming one. This led to
  mismatches and/or merge operations which end up not changing anything
  in the DB because the only difference would be removed again before
  writing.

* EDS contacts: read-ahead cache

  Performance is improved by requesting multiple contacts at once and
  overlapping reading with processing. On a fast system (SSD, CPU fast
  enough to not be the limiting factor), testpim.py's testSync takes 8
  seconds for a "match" sync where 1000 contacts get loaded and compared
  against the same set of contacts. Read-ahead with only 1 contact per
  query speeds that up to 6.7s due to overlapping IO and
  processing. Read-ahead with the default 50 contacts per query takes
  5.5s. It does not get much faster with larger queries.

* command line: execute --export and --print-items while the source is still reading

  Instead of reading all item IDs, then iterating over them, process
  each new ID as soon as it is available. With sources that support
  incremental reading (only the PBAP source at the moment) that provides
  output sooner and is a bit more memory efficient.

* WebDAV: avoid segfault during collection lookup

  Avoid referencing pathProps->second when the set of paths that
  PROPFINDs returns is empty. Apparently this can happen in combination
  with Calypso.

* engine: prevent timeouts in HTTP server mode

  HTTP SyncML clients give up after a certain timeout (SyncEvolution
  after RetryDuration = 5 minutes by default, Nokia e51 after 15
  minutes) when the server fails to respond.

  This can happen with SyncEvolution as server when it uses a slow
  storage with many items, for example via WebDAV. In the case of slow
  session startup, multithreading is now used to run the storage
  initializing in parallel to sending regular "keep-alive" SyncML
  replies to the client.

  By default, these replies are sent every 2 minutes. This can be
  configured with another extensions of the SyncMLVersion property:
    SyncMLVersion = REQUESTMAXTIME=5m

  Other modes do not use multithreading by default, but it can be
  enabled by setting REQUESTMAXTIME explicitly. It can be disabled
  by setting the time to zero.

  The new feature depends on a libsynthesis with multithreading enabled
  and glib >= 2.32.0, which is necessary to make SyncEvolution itself
  thread-safe. With an older glib, multithreading is disabled, but can
  be enabled as a stop-gap measure by setting REQUESTMAXTIME explicitly.

* Various testing and stability enhancements. SyncEvolution had to
  be made thread-safe for the HTTP timeout prevention.


SyncEvolution 1.3.99.3, 06.03.2013
==================================

Another development snapshot, with a particular focus on enhancing
(and in some cases, fixing) searching in the PIM Manager. The PIM
Manager in this snapshot depends on folks 0.9.x and thus gee
0.8. Support for Bluez 5 was added. The PIM Manager API was extended
by addding CreatePeer and ReplaceSearch. The previous methods,
SetPeer and RefineSearch, are still supported.

Some issues in CalDAV, WebDAV and SyncML were fixed.

Graham R. Cobb contributed several patches for enhancing ActiveSync
support and making it work with Exchange 2010.

Details:

* PIM Manager: add ReplaceSearch, always allow it

  The new ReplaceSearch is more flexible than RefineSearch. It can
  handle both tightening the search and relaxing it. The downside of it
  is the more expensive implementation (must check all contacts again,
  then find minimal set of change signals to update view).

  Previously, a search which had no filter set at all at the begining
  could not be refined. This limitation of the implementation gets
  removed by always using a FilteredView, even if the initial filter is
  empty.

* PIM Manager: introduce CreateConfig()

  That SetPeer() allows modifying and creating a config leads to race
  conditions when multiple clients want to create a config. The new
  CreateConfig() avoids that by atomically checking that a config does
  not exist yet and creating it.

  SetPeer() is still available for backwards compatibility. It continues
  to be used for modifying an existing config in TestContacts.testSync
  to check the effect of the logging settings.

* PIM Manager: fix double entries in filtered search with limit

  Stressing the FilteredView by using it in tests originally written
  for the FullView showed that the filling up a view may have
  used data while it was inconsistent internally, leading to
  contacts being present multiple times.

* PIM Manager and sync: support location = GEO property (FDO #60373)

  Exposed as "location" -> (lat, long) in the D-Bus bindings.
  Reading, writing and updating are supported.

* PIM Manager: support groups = CATEGORIES (FDO #60380)

  Allow reading and writing of groups (folks terminology), aka
  CATEGORIES in vCard.

* PIM Manager: intelligent phone search in EDS (part of FDO #59571)

  If phone number search is enabled in EDS, then the direct search in
  EDS now uses the more accurate
  E_BOOK_QUERY_EQUALS_NATIONAL_PHONE_NUMBER comparison, with the E164
  formatted caller ID as value to compare against. This gives
  semantically correct results. The previous solution (now the
  fallback) had to use substring searches, which did not match if the
  contact's phone number was not formatted according to E164 and
  which may have matched the wrong contacts if the trailing numbers
  are the same.

* PIM Manager : use pre-computed normalized phone numbers from EDS (part of FDO #59571)

  When available, the pre-computed E164 number from EDS will be used
  instead of doing one libphonebook parser run for each telephone
  number while reading. Benchmarking showed that this parsing was the
  number one hotspot, so this is a considerable improvement.

* PIM Manager: fix error messages

  Ensure and check that no unnecessary ERROR messages are printed.
  libfolks was used slightly incorrectly, leading to several
  harmless error messages (glib asserts). libphonenumber printed
  its error messages to stdout.

* PIM Manager: fix memory leaks during writing of contacts

  Constructing the GValues created additional references instead
  of taking over ownership as intended.

* D-Bus server: fix read-after-free bug when using syslog

  openlog() expects the string to remain valid. Must ensure that in
  LoggerSyslog by making a copy. Found with valgrind.

* PIM Manager: make implementation of some of the D-Bus methods thread-safe

  The goal is to make it easier to extend syncevo-dbus-server
  with other IPC mechanisms, which then can call the native C++
  code directly.

  That code was not prepared to handle calls in threads other than the
  main one. Now this is checked when entering the methods and work is
  shifted to the main thread if necessary. In the meantime the calling
  thread waits for completion.

* PIM Manager: check responsiveness (part of FDO #60851)

  Enhanced the testActive test so that it can detect when the D-Bus
  server stops responding for too long. One major reason for that was
  event processing in folks, which got improved as part of
  https://bugzilla.gnome.org/show_bug.cgi?id=694385

* PIM Manager: adapt to gee 0.8

  Changed the code to compile with gee 0.8, as used by folks 0.9.x.
  Older versions of folks are no longer supported.

* PBAP: support Bluez 5

  The new Bluez 5 API is the third supported API for doing PBAP
  transfers. It gets checked first, then the PBAB backend falls back to
  new-style obexd (file based, similar to Bluez 5, but not quite the
  same) and finally old-style obexd (data transfer via D-Bus).

  In contrast to previous APIs, Bluez 5 does not report the reason for a
  failed PBAP transfer. SyncEvolution then throws a generic "transfer
  failed" error with "reason unknown" as message.

* command line: recover from slow sync with new sync modes

  The error message for an unexpected slow sync still mentioned
  the old and obsolete "refresh-from-client/server" sync modes.
  Better mention "refresh-from-local/remote".

* CalDAV: more workarounds for Google CalDAV + unique IDs

  Google became even more strict about checking REV. Tests which
  reused a UID after deleting the original item started to fail sometime
  since middle of December 2012.

* CalDAV: work around Google server regression (undeclared namespace prefix in XML)

  Google CalDAV for a while (December 2012 till January 2013) sent
  invalid XML back when asked to include CardDAV properties in a
  PROPFIND. This got rejected in the XML parser, which prevents
  syncing calendar data:

     Neon error code 1: XML parse error at line 55: undeclared namespace prefix

  In the meantime Google fixed the issue in response to a bug report
  via email. But the workaround, only asking for the properties which
  are really needed, still makes sense and thus is kept.

* WebDAV: don't send Basic Auth via http proactively (FDO #57248)

  Sending basic authentication headers via http is insecure. Only do
  it proactively when the connection is encrypted and thus protects
  the information or when the server explicitly asks for it.

* Nokia: always add TYPE=INTERNET to EMAIL (FDO #61784)

  Without the explicit TYPE=INTERNET, email addresses sent to a Nokia
  e51 were not shown by the phone and even got lost eventually (when
  syncing back).

  This commit ensures that the type is set for all emails sent to any
  Nokia phone, because there may be other phones which need it and
  phones which don't, shouldn't mind. This was spot-checked with a N97
  mini, which works fine with and without the INTERNET type.

  This behavior can be disabled again for specific Nokia phones by
  adding a remote rule which sets the addInternetEmail session variable
  to FALSE again.

  Non-Nokia phones can enable the feature in a similar way, by setting
  the variable to TRUE.

* SyncML: config option for broken peers

  Some peers have problems with meta data (CtCap, old Nokia phones)
  and the sync mode extensions required for advertising the restart
  capability (Oracle Beehive). The default in SyncEvolution is to
  advertise the capability, so manual configuration is necessary when
  working with a peer that fails in that mode.

  Because the problem occurs when SyncEvolution contacts the peers
  before it gets the device information from the peer, dynamic rules
  based on the peer identifiers cannot be used. Instead the local config
  must already disable these extra features in advance.

  The "SyncMLVersion" property gets extended for this. Instead of just
  "SyncMLVersion = 1.0" (as before) it now becomes possible to say
  "SyncMLVersion = 1.0, noctcap, norestart".

  "noctcap" disables sending CtCap. "norestart" disables the sync mode
  extensions and thus doing multiple sync cycles in the same session
  (used between SyncEvolution instances in some cases to get client and
  server into sync in one session).

  Both keywords are case-insensitive. There's no error checking for
  typos, so beware!

  The "SyncMLVersion" property was chosen because it was already in use
  for configuring SyncML compatibility aspects and adding a new property
  would have been harder.

* ActiveSync: added support for specifying folder names

  Previously, the database field was interpreted as a Collection ID.  This adds
  logic to allow the database to be interpreted as a folder path.  The logic is:

  1) If the database is an empty string, pass it through (this is the most
  common case as it is interpreted as "use the default folder for the
  source type").
  2) If the database matches a Collection ID, use the ID (this is the same as
  the previous behaviour).
  3) If the database matches a folder path name, with an optional leading "/",
  use the Collection ID for the matching folder.
  4) Otherwise, force a FolderSync to get the latest folder changes from the
  server and repeat steps 2 and 3
  5) If still no match, throw an error.

* ActiveSync: support for listing databases

  Now --print-databases scans folders on the ActiveSync server and
  shows suitable folders for the ActiveSync backends instead of the
  previous, hard-coded help text.

  Invoking --print-databases can be used as a workaround for
  "SyncFolder error: Invalid synchronization key" errors. A better
  solution would be to do that automatically, but there was no time
  to implement that. See FDO #61869 and "[SyncEvolution] Activesync server losing state"
  http://thread.gmane.org/gmane.comp.mobile.syncevolution/4295

* command line: show backend error when listing databases fails

  The command line swallowed errors thrown by the backend while listing
  databases. Instead it just showed "<backend name>: backend failed". The goal
  was to not distract users who accidentally access a non-functional backend.
  But the result is that operations like --configure or --print-databases could
  fail without giving the user any hint about the root cause of the issue.

  Now the error explanation in all its gory details is included.

  For example, not having activesyncd running leads to:
  INFO] eas_contact: backend failed: fetching folder list:
  GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name
  org.meego.activesyncd was not provided by any .service files

  And running activesyncd without the necessary gconf keys shows up as:
  [INFO] eas_contact: backend failed: fetching folder list:
  GDBus.Error:org.meego.activesyncd.Error.AccountNotFound: Failed to find
  account [syncevolution@lists.intel.com]

* Minor memory leak fix when using GDBus GIO: GDBusMethodInfo

  Also depends on a glib fix, see https://bugzilla.gnome.org/show_bug.cgi?id=695376

* build fixes

  Avoid -lrt in make dependencies. Add missing pcre libs to
  syncevo-dbus-server. sqlite backend needs "#include <stdio.h>"
  (patch from Mario Kicherer).


SyncEvolution 1.3.99.2, 13.12.2012
==================================

Another development snapshot. Includes all fixes that went into 1.3.2
and several improvements to the PIM Manager. Documentation was updated
and extended considerably. The pim-manager-api.txt now describes the
abstract API while src/dbus/server/pim/README explains how
SyncEvolution implements it.


Details:

* PIM Manager searches for a caller ID ('phone' search) in EDS
  directly while folks still starts up. No unification is done of
  these results. Intermediate results are replaced by the final ones
  from folks once those are ready.

* PIM Manager: allow configuration of session directories (part of FDO #55921)

  Useful for moving the session directories to a temporary file system.
  They are essentially just useful for debugging when used as part of
  PIM Manager.

  - "logdir" - a directory in which directories are created with
               debug information about sync session
  - "maxsessions" - number of sessions that are allowed to exist
                    after a sync (>= 0): 0 is special and means unlimited,
                    1 for just the latest, etc.;
                    old sessions are pruned heuristically (for example,
                    keep sessions where something changed instead of
                    some where nothing changed), so there is no hard
                    guarantee that the last n sessions are present.

* PIM Manager: write less data to disk (part of FDO #55921)

  Avoid writing config file changes to disk by enabling a new
  "ephemeral" mode for syncing via the PIM Manager. In this mode,
  config file changes are not flushed resp. discarded directly.
  This prevents writing to .ini files in ~/.config.

  The "synthesis" binfile client files are still written, but they get
  redirected into the session directory, which can (and should) be set
  to a temp file system and get deleted again quickly.

  Data dumps are turned off now in the configs created by the PIM
  Manager.

* syncevo-dbus-server: use syslog instead of standard output by default

* syncevo-dbus-server: command line options for controlling
  output and startup

  -d, --duration=seconds/'unlimited'    Shut down automatically
                                        when idle for this duration (default 300 seconds)
  -v, --verbosity=level                 Choose amount of output, 0 = no output,
                                        1 = errors, 2 = info, 3 = debug; default is 1.
  -o, --stdout                          Enable printing to stdout (result of operations)
                                        and stderr (errors/info/debug).
  -s, --no-syslog                       Disable printing to syslog.
  -p, --start-pim                       Activate the PIM Manager (= unified address book)
                                        immediately.

* PIM Manager: store set of active address books persistently (FDO #56334)

  Together with storing the sort order persistently, this allows
  restarting the daemon and have it create the same unified address book
  again.

* PIM Manager: remove colon from valid peer UID character set (FDO #56436)

  Using the UID as part of file names gets more problematic when
  allowing colons. Remove that character from the API and enforce
  the format in the source code.

* PIM Manager API: introduce contact ID and use it for reading

  This makes it easier for a client to fully polulate its view with
  contact data. Previously it could happen that due to concurrent
  changes in the server, a client was returned data for the same
  contact multiple times. A client had to detect that and re-issue
  read requests.

* PIM Manager API: optional ViewAgent.Quiescent() (FDO #56428)

  The callback is guaranteed to be invoked once when a search has
  finished sending its initial results, and not sooner. This makes it
  possible to check whether the current data contains some contact or
  not.

* PIM Manager: limit number of search results (FDO #56142)

  A 'limit' search term with a number as parameter (formatted as string)
  can be added to a 'phone' or 'any-contains' search term to truncate the
  search results after a certain number of contacts. Example:
    Search([['any-contains', 'Joe'], ['limit', '10']])
    => return the first 10 Joes.

  As with any other search, the resulting view will be updated if
  contact data changes.

  The limit must not be changed in a RefineSearch(). A 'limit' term may
  (but doesn't have to) be given. If it is given, its value must match
  the value set when creating the search. This limitation simplifies the
  implementation and its testing. The limitation could be removed if
  there is sufficient demand.

* PIM Manager: fix refining a search

  Due to not mapping the local index in the view to the parent's index,
  refining only worked in views where parent and child had the same
  index for the contacts in the search view.

* PIM Manager: fix starting when done via search

  When the unified address book (= FullView) was not running yet at the
  time when a client wanted to search it, the unified address book was
  not started and thus the search never returned results.

* PIM Manager: fix writing contact, support photo and notes

  folks and EDS do not support writing properties in parallel
  (https://bugzilla.gnome.org/show_bug.cgi?id=652659). Must serialize
  setting of modified properties.

* PIM Manager: fix incorrect contact removal signals in filtered view

  The filtered view did not check whether a parent's removed contact was
  really part of the view before sending a removal signal for it.

* D-Bus: missing out parameters in D-Bus introspection XML (FDO #57292)

  The problem was in the C++ D-Bus binding. If the method that gets bound
  to D-Bus returns a value, that value was ignored in the signature:
    int foo() => no out parameter

  It works when the method was declared as having a retval:
    void foo (int &result) => integer out parameter

  This problem existed for both the libdbus and the GIO D-Bus
  bindings. In SyncEvolution it affected methods like GetVersions().

* PIM Manager performance: pre-compute normalized telephone numbers

  Looking up by phone number spends most of its cycles in normalizing of
  the phone numbers in the unified address book. Instead of doing that
  work over and over again during the search, do it once while loading.

  Looking up a phone number only once does not gain from this change, it
  even gets slower (more memory intensive, less cache locality). Only
  searching multiple times becomes faster.

  Ultimately it would be best to store the normalized strings together
  with the telephone number inside EDS when the contact gets
  created. Work on that is in progress.

* PIM Manager: improve performance of FullView sorting

  This fixes the hotspot during populating the FullView content: moving
  contacts around required copying IndividualData and thus copying
  complex C++ structs and strings. Storing pointers and moving those
  avoids that, with no lack of convenience thanks to boost::ptr_vector.

  Reordering also becomes faster, because the intermediate copy only
  needs to be of the pointers instead of the full content.

* PIM Manager example: add benchmarking

  The new "checkpoints" split up the whole script run into pieces which
  are timed separately, with duration printed to stdout. In addition,
  tools like "perf" can be started for the duration of one phase.

* SyncML: workarounds for broken peers

  Some peers have problems with meta data (CtCap, old Nokia phones) and
  the sync mode extensions required for advertising the restart
  capability (Oracle Beehive).

  Because the problem occurs when SyncEvolution contacts the peers
  before it gets the device information from the peer, dynamic rules
  based on the peer identifiers cannot be used. Instead the local config
  must already disable these extra features in advance.

  The "SyncMLVersion" property gets extended for this. Instead of just
  "SyncMLVersion = 1.0" (as before) it now becomes possible to say
  "SyncMLVersion = 1.0, noctcap, norestart".

  "noctcap" disables sending CtCap. "norestart" disables the sync mode
  extensions and thus doing multiple sync cycles in the same session
  (used between SyncEvolution instances in some cases to get client and
  server into sync in one session).

  Both keywords are case-insensitive. There's no error checking for
  typos, so beware!

  The "SyncMLVersion" property was chosen because it was already in use
  for configuring SyncML compatibility aspects and adding a new property
  would have been harder.

* EDS: fix creating databases

  --create-database was broken in combination with the final code in EDS
  3.6 because it passed NULL for the UID to e_source_new_with_uid(),
  which is considered an error by the implementation of that
  method. Must use e_source_new() if we don't have a UID.

* fixed some memory leaks, extended tests to cover new features and bugs


SyncEvolution 1.3.99.1, 25.10.2012
==================================

Development snapshot. The PIM Manager API implementation is fully
implemented, see src/dbus/server/pim/README for an introduction.  The
PBAP backend together with a new one-way caching sync mode provides an
efficient way of keeping a local database in sync via Bluetooth with a
phone which does not implement SyncML.

Other changes:

* workarounds for warnings from g++ 4.5

* engine: : local cache sync mode

  This patch  introduces support for true one-way syncing ("caching"):
  the local datastore is meant to be an exact copy of the data on the
  remote side. The assumption is that no modifications are ever made
  locally outside of syncing. This is different from one-way sync modes,
  which allows local changes and only temporarily disables sending them
  to the remote side.

  Another goal of the new mode is to avoid data writes as much as
  possible.

  This new mode only works on the server side of a sync, where the
  engine has enough control over the data flow. Setting "sync" to:
  - "local-cache-incremental" will do an incremental sync (if possible)
    or a slow sync (otherwise). This is usually the right mode to use,
    and thus has "local-cache" as alias.
  - "local-cache-slow" will always do a slow sync. Useful for
    debugging or after (accidentally) making changes on the local side.
    An incremental sync will ignore such changes because they are not
    meant to happen, aren't checked for to improve performance and
    thus will leave client and server out-of-sync!

  Both modes are recorded in the sync report of the local side. The
  target side is the client and records the normal "two-way" or "slow"
  sync modes.

  With the current SyncEvolution contact field list, first, middle and
  last name are used to find matches for contacts. For events, tasks
  and memos, time, summary and description are used.

* HTTP proxy: useProxy=0 overrides http_* env variables

  Previously, if http_proxy was set, a proxy was used even if
  explicitly disabled. This prevented disabling the use of a proxy
  which only made sense in some cases, like accessing something
  that runs locally. Explicitly telling SyncEvolution to ignore
  http_proxy is necessary because it doesn't support no_proxy.

* WebDAV: auto-discovery fix

  With Google Contact + CardDAV the auto-discovery failed after
  finding the default address book, without reporting that result.

* command line: implement --create/remove-database

  Creating a database is only possible with a chosen name. The UID is
  chosen automatically by the storage. Only implemented in the EDS
  backend.

* file backend: sub-second mod time stamps

  Change tracking in the file backend used to be based on the
  modification time in seconds. When running many syncs quickly (as in
  testing), that can lead to changes not being detected when they happen
  within a second. Now the file backend also includes the sub-second part of the
  modification time stamp, if available.

  This change is relevant when upgrading SyncEvolution: most of the
  items will be considered "updated" once during the first sync after
  the upgrade (or a downgrade) because the revision strings get
  calculated differently.

* D-Bus server: avoid progress outside of 0-100% range

  For example in the new TestLocalCache.testItemDelete100, the
  percentage value in the ProgressChanged signal become larger
  than 100 and then revert to 100 at the end of the sync.

  Seems the underlying calculation is faulty or simply inaccurate.
  This is not fixed. Instead the result is just clipped to the valid
  range.

* code cleanup + improvements in testing


SyncEvolution 1.3.1 -> 1.3.2, 05.11.2012
========================================

Minor (or major, if you depend on auto syncing) bug fix
release. Details:

* auto sync: only synced once (FDO #56667)

  A successful sync was incorrectly treated like a sync with a permanent
  failure, which prevents further automatic syncing.

* auto sync: notifications were not translated

  The code which enabled localization of messages created by the
  D-Bus server was incomplete. Localization was only enabled
  accidentally through KDE if the KDE platform modules was enabled
  during compilation and installed.

* HTTP Proxy: useProxy=0 overrides http_* env variables

  Previously, if http_proxy was set, a proxy was used even if
  explicitly disabled. This prevented disabling the use of a proxy
  which only made sense in some cases, like accessing something
  that runs locally. Explicitly telling SyncEvolution to ignore
  http_proxy is necessary because it doesn't support no_proxy.

* minor changes in testing and autotools files (missing Boost search path
  in gdbus* libs might have caused compile problems)


SyncEvolution 1.3 -> 1.3.1, 05.10.2012
======================================

Minor bug fix release. Details:

* command line: fix output of --import for directories

  The running count at the start of the line (#0, #1, ...) was
  not incremented when reading individual files from a directory.

* Funambol: work around PHOTO TYPE=image/jpeg, part II

  The final version of the fix hadn't made it into the source code.

* vCalendar 1.0 + tasks: DUE date could be shifted by a day (FDO #55238)

  Because of incomplete support for time conversion, the due date
  could get mixed up when phone and PC were set to something other
  than UTC. Reported and fixed by Peter Jan.

* syncevolution.org: syncevolution-evolution had incorrect dependencies

  Installation on older Linux distros was not possible because the ebook/ecal
  package dependencies were named incorrectly, for example libebook-1.2-10
  instead of libebook1.2-10. Only more recent packages have the extra
  dash, for example libebook-1.2-12. Reported by Mariusz Sokolowski.

* GTK-3 UI: fixed compile problem

  The GTK-3 UI depends on a class from gio-unix-2.0 and failed to
  compile on Fedora Core 16 because the configure checks for that lib
  (and thus the compiler flags) were missing. Reported by Peter
  Robinson.

* Curl: allow using it in the D-Bus server

  In the past, using curl as HTTP transport in the syncevo-dbus-server
  was prevented, leading to "unsupported transport type is specified in
  the configuration". The reason was that using curl would block the
  server and make it unresponsive on D-Bus.

  This reason has gone away, because now the HTTP traffic happens in a
  separate process. Thus now it is allowed to use curl in the
  syncevo-dbus-server.

* fix for false negative in syncevo-dbus-server testing


SyncEvolution 1.2.2 -> 1.3, 10.09.2012
======================================

After almost three months of public beta testing the next major
version of SyncEvolution is ready for release. The pre-releases did
have the desired effect of flushing out bugs not found by nightly
testing alone. Thanks everyone for packaging, downloading and testing
them!

New features are KDE/Akonadi and ActiveSync support, not only in the
source code but also in syncevolution.org binaries. ActiveSync is the
recommended way of synchronizing contacts with Google:
https://syncevolution.org/wiki/google-contacts-activesync

The D-Bus server and local sync were rewritten considerably, to make
the code cleaner and more robust. The CalDAV backend now also supports
tasks and memos. CalDAV and CardDAV can be used in combination with a
SyncML peer ("bridging SyncML and WebDAV"), thus allowing a device
which only supports SyncML to talk to a WebDAV service without any
intermediate storage.

1.3 contains bug fixes that were not backported to 1.2.x, so upgrading
is recommended. For example, SyncEvolution 1.3 is required for
Evolution 3.4, otherwise photos are not exported properly. Support for
Evolution >= 3.6 is in the source code, but not in syncevolution.org
binaries. Further workarounds for recent changes in Google CalDAV and
Funambol One Media were added.


Details:

* ActiveSync: updated to work with latest activesyncd and Google, package binaries

  Syncing Google contacts was added to the nightly testing. Syncing
  contacts and events with Exchange 2012 was already working. Setup
  instructions and known issues are described here:
  https://syncevolution.org/wiki/google-contacts-activesync

* phone sync: delete<->delete conflict + phone calendar+todo sync (BMC #23744)

  When deleting an item on phone and locally, the next sync failed with
  ERROR messages about "object not found". This has several reasons:
  - libsynthesis super data store attempts to read items
    which may or may not exist (triggers ERROR message)
  - it checks for 404 but Evolution backends only return a generic
    database error (causes sync to fail)

* phone sync: get phone vendor and model from Device ID profile (BMC #736)

  In the past we have relied on the user-modifiable device name to be
  the fingerprint for matching a phone to a template which is unreliable.

  This release changes this in the cases where the phone supports the
  Device ID profile (DIP). If support for DIP is detected, then we
  extract the vendor and product ids and attempt to associate them
  with a product and vendor name by using a newly added lookup table.

  This lookup table has to be maintained manually and depends on
  contributions by users to cover more devices. See
  http://blixtra.org/blog/2011/09/22/syncevolution-needs-you-or-at-least-your-bluetooth-phones/

* vCalendar 1.0: fixed recurring all-day event support

  vCalendar 1.0 cannot represent all-day events. The workarounds for
  mapping iCalendar 2.0 all-day events into vCalendar 1.0 was
  incomplete, leading to effects like shifting EXDATEs and end
  times.

* Funambol: ignore UID

  Funambol's OneMedia sends UID, but not RECURRENCE-ID. That becomes a
  problem when multiple events of the same event series are added to a
  backend which follows the iCalendar 2.0 standard (CalDAV, EDS, KDE),
  because these events all look like the master event, and there can be
  only one of those.

  SyncEvolution now strips the UID from all events coming from any
  Funambol server (regardless of the version). If a future Funambol
  server release adds support for both UID and RECURRENCE-ID, then
  SyncEvolution will have to be updated to take advantage of the
  improved server. Because the RECURRENCE-ID is also getting
  stripped (despite not being set at the moment), SyncEvolution should
  continue to work as it does now even if the server changes.

  It would have been nice to limit this workaround to affected Funambol
  server versions, but an inquiry on the Funambol mailing list didn't
  get a reply, therefore SyncEvolution is playing it safe and assumes
  that all future Funambol releases will have the same problem.

* Funambol: work around PHOTO TYPE=image/jpeg

  A combination of Funambol Android and Funambol server recently led to
  the Funambol server sending PHOTO data with TYPE=image/jpeg. This is
  invalid and caused EDS to reject the photo (Vladimir Elisseev,
  "[SyncEvolution] issues with syncing photos").

  Work around the problem by only keeping the part of the type after the
  last slash, if there is any. For image/jpeg and similar types that
  leads to the desired value and does not affect valid values, because
  those do not contain a slash
  (http://www.iana.org/assignments/media-types/image/index.html).

* Funambol: avoid slow syncs in refresh from server

  libsynthesis has traditionally implemented "refresh-from-server" as
  "delete local data" plus "slow" sync. This is more compatible, because
  some servers (like Google) do not support "refresh-from-server".

  But it has the downside that the server cannot know that the client
  won't send any data, and Funambol's OneMedia now only allows one slow
  sync before blocking the next one for a certain period of time. This is
  done to prevent excessive resource usage by badly behaving clients.

  To accomodate both kinds of servers, the new "enableRefreshSync"
  sync property can be set set to explicitly allow the usage of
  the "refresh-from-server" sync mode. It's off by default. The Funambol
  template has it turned on, existing configs must be updated manually
  (see upgrading comments below).

* Mobical (aka Everdroid): stopped testing memo syncing

  Memos used to work, but now only trigger an unspecific 400 error
  on the server side.

* GTK-UI: accept service config with a username again (BMC#23106)

  Suppressing configs with empty username had undesired side effects:
  modifying configs for direct syncing with a device incorrectly
  triggered the same error message, without any means of entering
  a username. The faulty check was removed without replacement.

* GTK-UI: added GTK 3 version of UI

  When GTK 3 is found during compilation, a GTK 3 version of the
  UI is built. The source code of both is different to avoid
  excessive use of ifdefs. At the moment, both versions offer
  the same features. In the long run, the GTK 3 version will
  replace the GTK 2 version.

* command line: added refresh/one-way-from-local/remote (BMC #23537)

  The -from-client/server sync modes are confusing because the direction
  of the data exchange depends on which side acts as SyncML server or
  client.

  This release introduces new modes which use -from-local/remote
  instead. The statistics and messages also use these variants
  now. The old modes are still understood, but are declared as "not
  recommended" in the documentation.

* command line: config and source names are optional (BMC #23783)

  The need to add "foo" and "bar" pseudo config and source names to the
  command line even when all parameters for the operation where
  explicitly specified on the command line was confusing.

  Now it is possible to invoke item operations without the config and
  source name. Names which refer to non-existent configs are still
  accepted, as in previous releases. Typos are handled better by
  producing a detailed error report which includes (as applicable):
  - config doesn't exist
  - source doesn't exist or not selected
  - backend property not set

  Because luids used to be positional arguments after <config> and
  <source>, a new --luids keyword is necessary to indicate that the
  ensuing parameters are luids and not <config> and <source>.

* command line: introduced --print-databases, supported for CalDAV/CardDAV

  Listing databases is now a dedicated operation, instead of being done
  whenever syncevolution was invoked without parameters.

  Advantages:
  - can be combined with property assignments for backends
    which do not work without that additional information, for example
    CalDAV/CardDAV:
    syncevolution --print-databases \
                  backend=[caldav|carddav] \
                  syncURL=... \
                  username=... \
                  password=...
  - can be done for configured sources

* command line: use both stdout and stderr

  Traditionally, the "syncevolution" command line tool mixed its
  INFO/ERROR/DEBUG messages into the normal stdout. This has the major
  drawback that error messages get lost during operations like
     syncevolution --export - @default addressbook | grep "John Doe"

  Now anything which is not the expected result of the operation is
  always sent to stderr. Obviously this includes ERROR messages. INFO
  and DEBUG are harder to decide. Because they usually convey meta
  information about the running operation, they are also sent to
  stderr. The output of running a sync goes to both stdout (summary)
  and stderr (progress).

* command line: allow setting empty properties

  Due to the way how properties were handled internally, it wasn't
  possible to explicitly set a property to its default value. Instead
  the property was unset. For example, explicitly setting database= was
  not possible.

  This is necessary for client-test and ActiveSync, because client-test
  needs to know that the testing is expected to run with the default
  databases (something which normally is avoided by overwriting empty
  database properties).

  Now the "is set" state is tracked explicitly in the config storage and
  command line property APIs. Unsetting a property via the command line
  could be implemented with an explicit command line option, but is not
  supported at the moment.

* command line: fixed --export <file name>

  When exporting items into a file, the delimiter between items
  was missing.

* command line + local sync: fixed erroneous "Comparison impossible" output.

  "Comparison impossible" was incorrectly printed after a successful
  comparison on the target side of local sync.

* local sync: fix timeout with local sync with libdbus

  When using libdbus instead of GIO D-Bus (as done by syncevolution.org
  binaries and SyncEvolution on Maemo), local sync may have aborted
  after 25 seconds when syncing many items with a D-Bus timeout error:

  [ERROR] sending message to child failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible ca

  Reported by Toke Høiland-Jørgensen for Harmattan. Somehow not encountered
  elsewhere.

* synccompare: shorter data dump of PHOTO

  A full comparison of the base64 PHOTO data can be very long.
  Now some key characteristics of the PHOTO data (number of
  characters in base64 encoding, number of bytes in decoded
  data, md5sum of decoded data) are printed instead.

  That way, unintended changes of the data (different encoding,
  different content) should still be found while testing and
  added/removed photos are nicely visible in synccompare diffs.

* synccompare: fixed output for byte-identical duplicates

  If database dumps contained byte-identical duplicates, they
  were treated as a single item on the left side of a comparison.
  This caused erroneous "added" entries on the right side.

* secure password storage: usage of GNOME Keyring vs. KDE KWallet configurable

  Automatically detecting KDE users is not possible at the
  moment. Instead KDE users have to manually set the new "keyring"
  global config property to "KDE" (case insensitive) if the
  SyncEvolution installation supports both, because GNOME Keyring is the
  default to avoid surprises for traditional users. If only KWallet
  support is enabled, then this is not necessary.

  "GNOME" and "true/false/1/0/yes/no" can also be set. This has the
  advantage that keyring usage can be enabled permanently for the
  command line in --daemon=no mode; normally keyrings are not used in
  that mode because accessing them can bring up UI dialogs.

  It also becomes possible to disable keyring usage in syncevo-dbus-server,
  something which couldn't be done before.

  The --keyring command line option is still supported, as an alias for
  "[--sync-property] keyring=<value>". The default value for --keyring
  is true, to match the traditional behavior. In contrast to other sync
  properties, setting "keyring" does not require an explicit --run
  parameter. Again this is done to mirror traditional usage.

* config: improved 'maxlogdirs' documentation

  The old explanation made it sound like nothing would get deleted by
  default ("If set, ..."). That's not correct, by default only 10
  sessions are kept.
  Also explain the behavior of deleting intermediate sessions first.

* Evolution: always create databases (PTCOM-113)

  Always try to create address book or calendar database, because even
  if there is a source there's no guarantee that the actual database
  was created already; the original logic for only setting this when
  explicitly requesting a new database therefore failed in some cases.

  This problem affected users who had never created anything locally
  and wanted to use SyncEvolution to migrate their data. Now that
  works without having to create dummy entries first.

* Evolution contacts: changed default sync format to vCard 3.0

  vCard 3.0 is the better default because it has saner encoding
  rules and defines more properties, thus avoiding the need for
  non-standard extensions. However, Mobical has problems with
  the new default. See upgrade instructions below.

* Evolution: added support for EDS 3.5.x

  When compiled against EDS 3.5.x or later, SyncEvolution now uses
  the backend code originally written for the EClient API introduced
  in EDS 3.2. That code was changed so that it works with the new
  include file rules and ESourceRegistry in EDS 3.5.x. Support
  for using the EClient API with EDS 3.4 was removed because maintaining
  three different flavors of the EDS backend code would be too much
  work and not gain much (just the possibility to test the EDSClient
  code with 3.4).

  At the moment, this is a compile time choice made automatically
  by configure. syncevolution.org binaries are compiled against
  an older EDS and thus do not work with EDS 3.5.x or later.

  EDS 3.5.x handles authentication itself, using a standard system
  prompt if necessary. SyncEvolution can no longer provide the password,
  and thus the "databaseUser/Password" options have no effect when using
  EDS 3.5.x.

* D-Bus server: fixed HTTP presence for recent libdbus

  Testing with libdbus 1.6.0 on Debian Testing failed because the lib
  changed some behavior: instead of looking up the owner of a certain
  bus name immediately, it now does that when invoking a
  method. Therefore the check for "have connection" in SyncEvolution
  was too simplistic and missed the fact that both were not usable,
  causing the server to assume that HTTP was down while in reality it
  should have assumed it to be up. This prevented auto-syncing and
  manually clicking "Sync" in the GTK UI.

* D-Bus server: made notification verbosity configurable with "notifyLevel"

  The new "notifyLevel" per-peer configuration option allows users to
  control how many desktop notifications the D-Bus server produces while
  executing an automatic sync:

  0 - suppress all notifications
  1 - show only errors
  2 - show information about changes and errors (in practice currently the same as level 3)
  3 - show all notifications, including starting a sync (default)

* WebDAV: fixed data corruption issue when uploading item with long UID

  In some cases data with a very long UID wasn't handled correctly,
  causing the out-going data to be malformed and probably causing a
  rejection by the server. The root cause is incorrect string handling.
  In releases before 1.2.99.1, only the --import operation of contacts
  into CardDAV were affected. In 1.2.99.1, the same code also got used
  for calendar items and then could also affect syncing.

* CalDAV: updated Google workarounds

  Google started sending empty items (VCALENDAR with no VEVENT inside)
  which cannot be removed. SyncEvolution 1.3 ignores such items.

  The workaround for a 404 from Google Calendar for a GET (sending a
  REPORT request matching the item's UID) was broken: first, processing
  the result ended up calling the unset responseEnd boost function
  pointer, which caused the request to fail. Second, getting multiple
  items wasn't handled (data from all items concatenated together was
  used).

  That can happen in the somewhat unlike case that some items have a UID
  which is a complete superset of the requested UID - not realistic in
  real life, but happens during testing.

* Google Calendar: updated URL redirect handling

  Google Calendar sometimes returns redirect requests to human-readable
  web sites (an "unavailable" page, a login form). This is of course
  bogus when the client is an automated CalDAV client.

  The "unavailable.html" case was already handled. Made it a bit more
  flexible to also catch possible variations of it (additional
  parameters, https instead of http).

  Added the https://accounts.google.com/ServiceLogin case. Not sure
  whether retrying will help in that case, but there's not much else
  that SyncEvolution can do.

* WebDAV: bridge with SyncML

  Now a peer accessed via SyncML can read/write data stored in a
  CalDAV/CardDAV server directly. This can be used to connect a device
  which only supports SyncML to a CalDAV/CardDAV server, or sync data
  between a SyncML server and a CalDAV/CardDAV server. See "CalDAV and
  CardDAV" in the README for details.

* WebDAV: improved --configure

  Added INFO output about checking sources. This helps with WebDAV when
  the server cannot be contacted (dead, misconfigured) because otherwise
  there would be no indication at all why the --configure operation
  seems to hang.

  Here is some example output, including aborting:
  $ syncevolution --configure --template webdav \
                  syncURL=http://192.168.1.100:9000/ \
                  username=foo password=bar retryDuration=2s \
                  target-config@webdav-temp
  [INFO] creating configuration target-config@webdav-temp
  [INFO] addressbook: looking for databases...
  [INFO] addressbook: no database to synchronize
  [INFO] calendar: looking for databases...
  [INFO] calendar: no database to synchronize
  [INFO] memo: looking for databases...
  [INFO] memo: no database to synchronize
  [INFO] todo: looking for databases...
  [INFO] todo: no database to synchronize

  It timed out fairly quickly here because of the retryDuration=2s. That
  also gets placed in the resulting config, which is probably not desired.

  Aborting the operation is now supported:

  $ syncevolution --configure \
                  --template webdav \
                  syncURL=http://192.168.1.100:9000/ \
                  username=foo password=bar \
                  target-config@webdav-temp
  [INFO] creating configuration target-config@webdav-temp
  [INFO] addressbook: looking for databases...
  ^C[INFO] Asking to suspend...
  [INFO] Press CTRL-C again quickly (within 2s) to stop immediately (can cause problems in the future!)
  ^C[INFO] Aborting immediately ...
  [ERROR] error code from SyncEvolution aborted on behalf of user (local, status 20017): aborting as requested by user

  It would be good to make the CTRL-C handling code aware that it can
  abort immediately instead of doing the intermediate "asking to suspend"
  step, which only makes sense for sync sessions.

* WebDAV: support tasks and memos (BMC #24893)

  The new backend property values "CalDAVTodo" and "CalDAVJournal"
  select tasks resp. memos stored in a CalDAV collection. "CalDAV"
  continues to select events.

  Events, tasks and journals can be mixed in the same resource (=
  URL). However, this is less efficient than storing them separately.

  A good CalDAV server allows filtering items by type, and SyncEvolution
  uses that. However, it was found that Radicale 0.7 ignores this
  filtering, which could have led to data loss (SyncEvolution asks for
  all VTODOs in preparation for a "delete all items" operation in a
  "CalDAVTodo" source, gets also VJOURNALs, then deletes them).

  Therefore SyncEvolution plays it safe and downloads the VTODO and
  VJOURNAL data to double-check that it is working on the right items.
  This causes additional traffic for well-behaving servers; currently
  it cannot be turned off.

  Tasks are exchanged as vCalendar 1.0 or iCalendar 2.0 VJOURNAL.
  Memos are exchanged as VTODO or plain text. The logic for storing
  incoming plain text is slightly different compared to the way how
  the EDS memo backend did it: instead of copying the first line
  from the text into the summary, it is now moved. In other words,
  the first line gets stripped. The change is primarily technically
  motivated; both approaches have pros and cons.

* WebDAV: improved Radicale support

  Radicale > 0.7 will return status 200 for delete requests;
  is now treated like 204 by SyncEvolution. 412 'Preconditiona Failed'
  when asking to delete an already removed item is treated like
  the more common 404 'not found'. Same with 410 'gone' instead
  of 404 when trying to read a non-existent item.

* CalDAV/CardDAV sync: improved target side output

  Added a "target side of local sync ready" INFO message to introduce
  the output which has the target context in the [INFO] tag. The sync report
  from the target side now has the target context embedded in brackets
  after the "Changes applied during synchronization" header, to avoid
  ambiguities.

  Sometimes the backend has to resend requests because of temporary
  issues. If the problem turned out to be permanent, there was a long
  period of time, retryDuration=5 minutes to be precice, in which no
  visible progress happened.

  Now SyncEvolution's WebDAV backend will print a message like this
  before going to sleep until it is time to retry:

  [INFO @googlecalendar] operation temporarily (?) failed, going to retry in 5.0s before giving up in 18.4s: PROPFIND: Neon error code 1: 401 Unauthorized

  The uncertainty comes from several factors. In this example, the 401
  might indicate a permanent problem (wrong credentials), or it could be
  Google reporting a temporary authorization problem which is (probably)
  meant to slow down the client while it asks the user to re-enter the
  password. SyncEvolution only asks for passwords once, so it tries
  again with the same password if it was successful with it in the
  past. Otherwise it gives up immediately.

  Another dubious example are name server lookup errors. They can be
  permanent (wrong host name) or temporary (name server
  down). SyncEvolution errs on the side of retrying, to avoid
  interrupting an operation which still has a chance to continue.

  Output from the target side of a local sync was passed through stderr
  redirection as chunks of text to the frontends. This had several
  drawbacks:
  - forwarding only happened when the local sync parent was processing
    the output redirection, which (due to limitations of the implementation)
    only happens when it needs to print something itself
  - debug messages were not forwarded
  - message boundaries might have been lost

  In particular the new INFO messages are relevant while the sync runs
  and need to be shown immediately.

* WebDAV: --status for WebDAV source aborted

  The command line --status operation did not complete when applied to a
  CalDAV/CardDAV source. Instead it aborted because the operation took a
  code path where the backend was not fully initialized.

* file backend: more flexible sync support for memos

  The databaseFormat=text/calendar for memos did not support
  synchronizing as plain text. When using the new
  databaseFormat=text/calendar+plain, vCalendar/iCalendar/plain text
  are all valid sync formats; the storage is iCalendar 2.0
  VJOURNAL in all cases.

* WebDAV: avoid potential crash during database detection

  When a server responds to a PROPFIND for a path with results for some
  other path, then SyncEvolution crashed during the search for the
  default calendar or address book because of a bug in the code which
  was meant to handle that kind of response. Apparently Yahoo Calendar
  did that. Now seen again in combination with Radicale 0.6.4.

  In general, the code was made more robust to cope with bugs in
  Radicale 0.6.4. Later Radicale versions fixed these issues and also
  worked with SyncEvolution 1.2.2 without client-side workarounds.

* WebDAV: better path normalization

  "syncURL" and "database" properties had to end in a trailing slash,
  otherwise items were not found (404 errors). Now the necessary slash
  is added automatically.

* Curl transport: support SSLServerCertificates=<path>

  When the setting refers to a directory, then CURLOPT_CAINFO doesn't
  work (must be a file). Check this and use CURLOPT_CAPATH instead.

  Caveat: there are some comments in the API documentation about "NSS
  enabled libcurl" which supports a directory in
  CURLOPT_CAINFO. Hopefully providing an explicit path in CURLOPT_CAPATH
  also works in that configuration.

* code cleanup + rewrite: syncing done in separate process

  syncevo-dbus-server now runs syncing in a separate process. Local
  sync also uses a second helper process. This makes the D-Bus server
  more responsive via D-Bus (no more blocking operations) and
  minimizes the effect of bugs in code involved with syncing
  (backends, system libraries, etc.).

  In the long term this restructuring will also allow more advanced
  features, like monitoring local or remote storage for changes.

* SyncEvolution <-> SyncEvolution sync: multiple cycles per session

  SyncML only allows one send/receive cycle per session. There are cases
  (for example, client side merges data that a dumber server failed to
  match correctly) where client and server are still out of sync at
  the end of a cycle. When SyncEvolution syncs with another SyncEvolution
  instance (locally or remotely), both sides detect that the peer
  can continue syncing in the same session and start over automatically
  when needed. Previously the user had to start another sync session manually.

  To the user this is shown as "number of cycles" in a sync session
  in the sync report. "Restart" is the process of entering a new cycle.

  The cycles are also visible in the command line output as multiple
  INFO lines:

    [INFO] eds_contact: starting first time sync from client (peer is server)
    [INFO] creating complete data backup of source eds_contact before sync (enabled with dumpData and needed for prin
    Local data changes to be applied during synchronization:
    *** eds_contact ***
    no changes

    [INFO] eds_contact: sent 1/1
    [INFO] eds_contact: started
    [INFO] eds_contact: first time sync done successfully
    [INFO] eds_contact: starting normal sync from client (peer is server)         <===
    [INFO] eds_contact: started                                                   <===
    [INFO] eds_contact: normal sync done successfully                             <===
    [INFO] creating complete data backup after sync (enabled with dumpData and needed for printChanges)

    Synchronization successful.

    Changes applied during synchronization:
    +---------------|-----------------------|-----------------------|-CON-+
    |               |         LOCAL         |        REMOTE         | FLI |
    |        Source | NEW | MOD | DEL | ERR | NEW | MOD | DEL | ERR | CTS |
    +---------------+-----+-----+-----+-----+-----+-----+-----+-----+-----+
    |   eds_contact |  0  |  0  |  0  |  0  |  1  |  0  |  0  |  0  |  0  |
    |   refresh-from-local, 2 cycles, 0 KB sent by client, 0 KB received  |
                            ^^^^^^^^
    |   item(s) in database backup: 1 before sync, 1 after it             |
    +---------------+-----+-----+-----+-----+-----+-----+-----+-----+-----+
    |          start Tue Feb  7 17:07:49 2012, duration 0:03min           |
    |               synchronization completed successfully                |
    +---------------+-----+-----+-----+-----+-----+-----+-----+-----+-----+

* SyncEvolution <-> SyncEvolution sync: negotiate UID support via SyncCap (BMC #22783)

  The semantic of UID/RECURRENCE-ID in calendar data is now tracked
  per data store involved in a sync. If full iCalendar 2.0 semantic
  (= IDs are globally unique) is guaranteed, then pairs are found
  based on these IDs. Otherwise pairs must be found by looking at
  item attributes.

  Previously a hack was used to detect this kind of support (any kind
  of SyncEvolution instance was assumed to support it, although some
  backends do not).

* engine: add DTSTAMP+LAST-MODIFIED before writing calendar items

  When writing calendar items into a backend storage as iCalendar 2.0 or
  vCalendar 1.0, they should have DTSTAMP and LAST-MODIFIED values. DTSTAMP
  is expected by some CalDAV servers (like Apple). LAST-MODIFIED is usually
  added by the storage, but not always.

  In the text/plain -> syncevolution -> text/calendar -> Radicale -> EDS
  -> syncevolution chain the LAST-MODIFIED was not added by Radicale, which caused
  problems for change tracking in an EDS-based SyncEvolution.

  Also necessary when importing from a phone using vCalendar without
  DTSTAMP directly into CalDAV.

* autotools: ensure that link lines are complete

  As mentioned by Tino Keitel on the mailing list, some libs and
  executables were only implicitly linked against libraries that they
  called directly. This happened to work by chance because these libraries
  ended up in the running executable anyway, due to indirect loading.
  Now there is a "make installcheck" test for this kind of defect
  and the makefiles were updated to avoid it.

  One exception is libsmltk, which depends on the caller providing
  SySync logging support.

* syncevolution.org packages: fixed D-Bus server autostart in .deb and .rpm packages

  syncevo-dbus-server wasn't started automatically as part of a user
  session because /etc/xdg/autostart/syncevo-dbus-server.desktop wasn't
  included in the packages. This broke auto syncing after a session
  restart (required manually starting SyncEvolution).

* syncevolution.org packages: support KDE

  The traditional "syncevolution-evolution" package was
  replaced with "syncevolution-bundle". A meta "syncevolution-evolution"
  package depends on it, to support seamless updates for users who have
  "syncevolution-evolution" installed.

  Binary dependencies of the main .deb are ignored for backends
  because loading them is optional. The new "syncevolution-kde"
  package has the right dependencies for KDE/Akonadi, while
  "syncevolution-evolution" mostly just lists standard libs
  if the "EDS compatibility" mode is used, where libebook/libecal
  are loaded dynamically.

  Platform specific code (GNOME keyring, KDE wallet) was moved into
  loadable, optional modules, to allow installation of the SyncEvolution
  bundle without forcing the installation of unused system components.

* D-Bus: use GIO D-Bus instead of libdbus if available

  When compiling from source, the more modern GIO D-Bus is used instead
  of libdbus if available and recent enough (>= 2.30). syncevolution.org
  binaries still use libdbus, to stay compatible with older Linux
  distros.

* several minor bug fixes

  syncevo-dbus-server now runs under valgrind in the nightly testing,
  plus several more test scenarios were added. This helped to find
  and fix various minor memory handling issues.

* developers: backend API changes

  beginSync/endSync() (aka m_startDataRead/m_endDataWrite) may now be
  called multiple times per SyncSource instance life cycle. SyncSources
  derived from TrackingSyncSource should work without changes. Use the
  Client::Source::*::testChangesMultiCycles test to check whether your
  backend supports this correctly.

  Reading and deleting must throw a 404 status exception when an item
  is not found. The Client::Source::*::*404 tests cover this.

  The special semantic of the former RegisterSyncSource::InactiveSource
  (invalid pointer of value 1) caused bugs, like using it in
  --print-databases (=> segfault) or not being able to store the result
  of a createSource() directly in a smart pointer (=> potential leak in
  SyncSource::createSource()).

  Obviously a bad idea to start with. Replaced with a
  RegisterSyncSource::InactiveSource() method which creates a real,
  inactive SyncSource instance which can and must be deleted by the
  caller.

  This is a SyncSource API change for backend developers.  Instead of
  RegisterSyncSource::InactiveSource, return
  RegisterSyncSource::InactiveSource(). Comparisons against
  RegisterSyncSource::InactiveSource needs to be replaced with a call
  to the new SyncSource::isInactive().

  Long-running backend calls are encouraged to check for events on the
  main glib context (either in a loop or with
  g_main_context_iteration(NULL)) and abort when
  SuspendFlags::getSuspendFlags().getState() returns
  SuspendFlags::ABORT.

  Implementing the improved local sync output required extending the
  D-Bus API. The Server.LogOutput signal now has an additional
  "process name" parameter. Normally it is empty. For messages
  originating from the target side, it carries that extra target
  context string.

  This D-Bus API change is backward compatible. Older clients can still
  subscribe to and decode the LogOutput messages, they'll simply ignore
  the extra parameter. Newer clients expecting that extra parameter
  won't work with an older D-Bus daemon: they'll fail to decode the
  D-Bus message.

* packagers:

  libgdbussyncevo is now installed as a normal library in /usr/lib,
  even though SyncEvolution is the only user.

  pcrecpp is now a new hard dependency.


Upgrading from release 1.2.x:

The sync format of existing configurations for Mobical (aka Everdroid)
must be updated manually, because the server has encoding problems when
using vCard 3.0 (now the default for Evolution contacts):
   syncevolution --configure \
                 syncFormat=text/x-vcard \
                 mobical addressbook

The Funambol template explicitly enables usage of the
"refresh-from-server" sync mode to avoid getting throttled with 417
'retry later' errors. The same must be added to existing configs
manually:
   syncevolution --configure \
                 enableRefreshSync=TRUE \
                 funambol

Upgrading from releases before 1.2:

Old configurations can still be read. But writing, as it happens
during a sync, must migrate the configuration first. Releases >= 1.2
automatically migrates configurations. The old configurations
will still be available (see "syncevolution --print-configs") but must
be renamed manually to use them again under their original names with
older SyncEvolution releases.


SyncEvolution 1.2.99.3 -> 1.3, 10.09.2012
=========================================

Final SyncEvolution 1.3 release. The pre-releases did have the desired
effect of flushing out bugs not found by nightly testing alone. Thanks
everyone for packaging, downloading and testing them! Time to get it
out officially as the next stable release.

* D-Bus server + GIO D-Bus: shutdown fix

  When compiled against GIO D-Bus (not the case in syncevolution.org
  binaries), the syncevo-dbus-server occasionally shut down before
  sending out all pending D-Bus messages. Showed up only in nightly
  testing.

* D-Bus server + GIO D-Bus: fix auto-activation (Debian bug #599247)

  When syncevo-dbus-server was started on demand by the D-Bus daemon,
  then it registered itself with the daemon before it was ready to
  serve requests. Only happened in combination with GIO D-Bus and
  thus was not a problem before 1.2.99.x.

  One user-visible effect was that the GTK UI did not select the default
  service when it was started for the first time, because it could not
  retrieve that information from syncevo-dbus-server.

* local sync: fix timeout with local sync with libdbus

  When using libdbus instead of GIO D-Bus (as done by syncevolution.org
  binaries and SyncEvolution on Maemo), local sync may have aborted
  after 25 seconds when syncing many items with a D-Bus timeout error:

  [ERROR] sending message to child failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible ca

  Reported by Toke Høiland-Jørgensen for Harmattan. Somehow not encountered
  elsewhere.

* KDE: check for D-Bus to avoid crash in KApplication (BMC #25596)

  Some unnamed version of KDE crashes in KApplication when invoked
  without a D-Bus session. The reporter ran into this when compiling
  from source, because the SyncEvolution binary is invoked as part of
  the build process, which ran outside of a D-Bus session.

  Avoid the crash by checking for a D-Bus session bus before instantiating
  KApplication. Instantiating KApplication was added for KWallet support.
  Without D-Bus, KWallet does not work either, therefore throw an explicit
  error when the lack of D-Bus is detected.

* Funambol: work around PHOTO TYPE=image/jpeg

  A combination of Funambol Android and Funambol server recently led to
  the Funambol server sending PHOTO data with TYPE=image/jpeg. This is
  invalid and caused EDS to reject the photo (Vladimir Elisseev,
  "[SyncEvolution] issues with syncing photos").

  Work around the problem by only keeping the part of the type after the
  last slash, if there is any. For image/jpeg and similar types that
  leads to the desired value and does not affect valid values, because
  those do not contain a slash
  (http://www.iana.org/assignments/media-types/image/index.html).

* syncevo-http-server: fixed printing of server debug output

  Python failed to call logSyncEvoOutput() after adding the additional
  'process' parameter to LogOutput because it extracts all four
  parameters and then cannot pass them to logSyncEvoOutput().

  Now logSyncEvoOutput() uses the new process information to instantiate
  a logger with the right prefix, using 'sync' as fallback for messages
  without that information (as before).

* Some minor code and test cleanup.


SyncEvolution 1.2.99.3 -> 1.2.99.4, 07.08.2012
==============================================

Another release candidate for SyncEvolution 1.3. Lesson learned:
declaring a snapshot as "final" is a good way of luring the hidden bugs
into the light. Of course, then another snapshot is needed...

Details:

* D-Bus server: fix support for autoSyncDelay > 0

  Auto syncing was not getting triggered when using an autoSyncDelay > 0;
  by default it is 5 minutes. Thanks to Vladimir Elisseev for reporting
  this problem.

* command line: fixed --export <file name>

  When exporting items into a file, the delimiter between items
  was missing.

* config: improved 'maxlogdirs' documentation

  The old explanation made it sound like nothing would get deleted by
  default ("If set, ..."). That's not correct, by default only 10
  sessions are kept.
  Also explain the behavior of deleting intermediate sessions first.

* developers: fixed D-Bus interface XML

  Reverted to Qt 4.x compatible annotations and changed "templateName"
  to "getTemplate" to make it more obvious what the parameter does.
  Only relevant for the out-of-tree Qt UI.

  Fixed accidental removal of the "template" parameter in
  Session.GetNamedConfig(). Was not used in practice, but has to be
  correct in case that someone wants to use it.


SyncEvolution 1.2.99.2 -> 1.2.99.3, 24.07.2012
==============================================

Final release candidate for SyncEvolution 1.3 - fingers crossed,
knock on wood, etc.

ActiveSync is now available in binaries from syncevolution.org and
becomes the recommended way of synchronizing contacts with Google. EDS
3.5.x and later are supported when compiling from source;
syncevolution.org binaries continue to support only EDS up to 3.4.


Details:

* EDS: added support for EDS 3.5.x

  When compiled against EDS 3.5.x or later, SyncEvolution now uses
  the backend code originally written for the EClient API introduced
  in EDS 3.2. That code was changed so that it works with the new
  include file rules and ESourceRegistry in EDS 3.5.x. Support
  for using the EClient API with EDS 3.4 was removed because maintaining
  three different flavors of the EDS backend code would be too much
  work and not gain much (just the possibility to test the EDSClient
  code with 3.4).

  At the moment, this is a compile time choice made automatically
  by configure. syncevolution.org binaries are compiled against
  an older EDS and thus do not work with EDS 3.5.x or later.

  EDS 3.5.x handles authentication itself, using a standard system
  prompt if necessary. SyncEvolution can no longer provide the password,
  and thus the "databaseUser/Password" options have no effect when using
  EDS 3.5.x.

* ActiveSync: updated to work with latest activesyncd and Google, package binaries

  Syncing Google contacts was added to the nightly testing. Syncing
  contacts and events with Exchange 2012 was already working. Setup
  instructions and known issues are described here:
  https://syncevolution.org/wiki/google-contacts-activesync

* local sync: don't drop data comparison output on target side

  synccompare on the target side of a local sync was invoked with its
  output being redirected via an unreliable socket to the local sync
  parent. When the output was large, some of it might have been lost.

* local sync: fixed crash

  When processing stdout from syncevo-local-child in
  syncevo-dbus-helper, the LogRedirect class was invoked recursively and
  tried to print the same stdout data repeatedly until the
  syncevo-dbus-helper crashed due to the infinite recurssion.

* local sync: fixed helper process shutdown in case of parent failure

  The helper process only detected that the parent failed when
  it tried to log something while the parent had already shut down
  the D-Bus connection. Even that did not work reliably and differed
  between D-Bus libdbus and GIO.

  Added several test cases and fixes for "process died prematurely"
  error scenarios.

* Mobical (aka Everdroid): stopped testing memo syncing

  Memos used to work, but now only trigger an unspecific 400 error
  on the server side.

* autotools: ensure that link lines are complete

  As mentioned by Tino Keitel on the mailing list, some libs and
  executables were only implicitly linked against libraries that they
  called directly. This happened to work by chance because these libraries
  ended up in the running executable anyway, due to indirect loading.
  Now there is a "make installcheck" test for this kind of defect
  and the makefiles were updated to avoid it.

  One exception is libsmltk, which depends on the caller providing
  SySync logging support.

* D-Bus server: fixed HTTP presence for recent libdbus

  Testing with libdbus 1.6.0 on Debian Testing failed because the lib
  changed some behavior: instead of looking up the owner of a certain
  bus name immediately, it now does that when invoking a
  method. Therefore the check for "have connection" in SyncEvolution
  was too simplistic and missed the fact that both were not usable,
  causing the server to assume that HTTP was down while in reality it
  should have assumed it to be up. This prevented auto-syncing and
  manually clicking "Sync" in the GTK UI.

* syncevolution.org: declare dependencies on libical and EDS

  Let the bundle .deb depend on libical if the lib was enabled during
  compilation (for example, for CalDAV). This ensures that it gets
  installed on systems which otherwise don't have it.

  "syncevolution-evolution" is compatible (and depends on) EDS up to
  and including 3.4. The package now declares that dependency and
  conflicts with more recent EDS, because even if the older EDS libs
  are still installed they won't work when the rest of EDS was
  updated.

* CalDAV + syncevolution.org: fixed segfault without libical+libecal

  When libical and libecal were not installed, trying to use the CalDAV
  backend for VEVENTs segfaulted because it depends on libical and did
  not check properly for it. Only affected syncevolution.org binaries.


SyncEvolution 1.2.99.1 -> 1.2.99.2, 04.07.2012
==============================================

Next step towards SyncEvolution 1.3. It adds a workaround for
Funambol's OneMedia and fixes an old bug which became more severe in
1.2.99.1. Also has some usability improvements for
CalDAV/CardDAV. Hopefully it will not take long to stabilize the code,
so test it now while it is still hot :-)


Details:

* Funambol: ignore UID

  Funambol's OneMedia sends UID, but not RECURRENCE-ID. That becomes a
  problem when multiple events of the same event series are added to a
  backend which follows the iCalendar 2.0 standard (CalDAV, EDS, KDE),
  because these events all look like the master event, and there can be
  only one of those.

  SyncEvolution now strips the UID from all events coming from any
  Funambol server (regardless of the version). If a future Funambol
  server release adds support for both UID and RECURRENCE-ID, then
  SyncEvolution will have to be updated to take advantage of the
  improved server. Because the RECURRENCE-ID is also getting
  stripped (despite not being set at the moment), SyncEvolution should
  continue to work as it does now even if the server changes.

  It would have been nice to limit this workaround to affected Funambol
  server versions, but an inquiry on the Funambol mailing list didn't
  get a reply, therefore SyncEvolution is playing it safe and assumes
  that all future Funambol releases will have the same problem.

* WebDAV: fixed data corruption issue when uploading item with long UID

  In some cases data with a very long UID wasn't handled correctly,
  causing the out-going data to be malformed and probably causing a
  rejection by the server. The root cause is incorrect string handling.
  In releases before 1.2.99.1, only the --import operation of contacts
  into CardDAV were affected. In 1.2.99.1, the same code also got used
  for calendar items and then could also affect syncing.

* engine: add DTSTAMP+LAST-MODIFIED before writing calendar items

  When writing calendar items into a backend storage as iCalendar 2.0 or
  vCalendar 1.0, they should have DTSTAMP and LAST-MODIFIED values. DTSTAMP
  is expected by some CalDAV servers (like Apple). LAST-MODIFIED is usually
  added by the storage, but not always.

  In the text/plain -> syncevolution -> text/calendar -> Radicale -> EDS
  -> syncevolution chain the LAST-MODIFIED was not added by Radicale, which caused
  problems for change tracking in an EDS-based SyncEvolution.

  Also necessary when importing from a phone using vCalendar without
  DTSTAMP directly into CalDAV.

* Google Calendar: updated URL redirect handling

  Google Calendar sometimes returns redirect requests to human-readable
  web sites (an "unavailable" page, a login form). This is of course
  bogus when the client is an automated CalDAV client.

  The "unavailable.html" case was already handled. Made it a bit more
  flexible to also catch possible variations of it (additional
  parameters, https instead of http).

  Added the https://accounts.google.com/ServiceLogin case. Not sure
  whether retrying will help in that case, but there's not much else
  that SyncEvolution can do.

* CalDAV + VJOURNAL: handle UID conflicts

  When asked to insert a VJOURNAL which already existed (= same UID),
  CalDAV servers respond with a 412 "Precondition failed" error. This
  needs to be detected and translated into an "item needs to be merged"
  result so that the engine can load the existing item, merge the data,
  and then write back.

* WebDAV: --status for WebDAV source aborted

  The command line --status operation did not complete when applied to a
  CalDAV/CardDAV source. Instead it aborted because the operation took a
  code path where the backend was not fully initialized.

* CalDAV/CardDAV sync: improved target side output

  Added a "target side of local sync ready" INFO message to introduce
  the output which has the target context in the [INFO] tag. The sync report
  from the target side now has the target context embedded in brackets
  after the "Changes applied during synchronization" header, to avoid
  ambiguities.

  Sometimes the backend has to resend requests because of temporary
  issues. If the problem turned out to be permanent, there was a long
  period of time, retryDuration=5 minutes to be precice, in which no
  visible progress happened.

  Now SyncEvolution's WebDAV backend will print a message like this
  before going to sleep until it is time to retry:

  [INFO @googlecalendar] operation temporarily (?) failed, going to retry in 5.0s before giving up in 18.4s: PROPFIND: Neon error code 1: 401 Unauthorized

  The uncertainty comes from several factors. In this example, the 401
  might indicate a permanent problem (wrong credentials), or it could be
  Google reporting a temporary authorization problem which is (probably)
  meant to slow down the client while it asks the user to re-enter the
  password. SyncEvolution only asks for passwords once, so it tries
  again with the same password if it was successful with it in the
  past. Otherwise it gives up immediately.

  Another dubious example are name server lookup errors. They can be
  permanent (wrong host name) or temporary (name server
  down). SyncEvolution errs on the side of retrying, to avoid
  interrupting an operation which still has a chance to continue.

  Output from the target side of a local sync was passed through stderr
  redirection as chunks of text to the frontends. This had several
  drawbacks:
  - forwarding only happened when the local sync parent was processing
    the output redirection, which (due to limitations of the implementation)
    only happens when it needs to print something itself
  - debug messages were not forwarded
  - message boundaries might have been lost

  In particular the new INFO messages are relevant while the sync runs
  and need to be shown immediately.

* command line: fixed password + property lookup during --print-databases

  --print-databases for an existing configuration did not look up
  passwords stored in a keyring, causing the operation to fail for
  backends like CalDAV/CardDAV where credentials are required.

  Overriding source properties in that case also only worked when using
  the unqualified property name ("databasePassword=foo") but not when
  using the source name as prefix ("calendar/databasePassword=foo").

* Developers:

  Implementing the improved local sync output required extending the
  D-Bus API. The Server.LogOutput signal now has an additional
  "process name" parameter. Normally it is empty. For messages
  originating from the target side, it carries that extra target
  context string.

  This D-Bus API change is backward compatible. Older clients can still
  subscribe to and decode the LogOutput messages, they'll simply ignore
  the extra parameter. Newer clients expecting that extra parameter
  won't work with an older D-Bus daemon: they'll fail to decode the
  D-Bus message.


SyncEvolution 1.2.2 -> 1.2.99.1, 22.06.2012
===========================================

First pre-release of SyncEvolution 1.3. Contains bug fixes that were
not backported to 1.2.x, so upgrading is recommended. For example,
SyncEvolution 1.3 is required for Evolution 3.4, otherwise photos are
not exported properly. Further workarounds for recent changes in
Google CalDAV were added.

Major new features are KDE/Akonadi support in the syncevolution.org
binaries and ActiveSync support (only in the source code). The D-Bus
server and local sync were rewritten considerably, to make the code
cleaner and more robust. The CalDAV backend now also supports tasks
and memos.


Details:

* phone sync: delete<->delete conflict + phone calendar+todo sync (BMC #23744)

  When deleting an item on phone and locally, the next sync failed with
  ERROR messages about "object not found". This has several reasons:
  - libsynthesis super data store attempts to read items
    which may or may not exist (triggers ERROR message)
  - it checks for 404 but Evolution backends only return a generic
    database error (causes sync to fail)

* phone sync: get phone vendor and model from Device ID profile (BMC #736)

  In the past we have relied on the user-modifiable device name to be
  the fingerprint for matching a phone to a template which is unreliable.

  This release changes this in the cases where the phone supports the
  Device ID profile (DIP). If support for DIP is detected, then we
  extract the vendor and product ids and attempt to associate them
  with a product and vendor name by using a newly added lookup table.

  This lookup table has to be maintained manually and depends on
  contributions by users to cover more devices. See
  http://blixtra.org/blog/2011/09/22/syncevolution-needs-you-or-at-least-your-bluetooth-phones/

* vCalendar 1.0: fixed recurring all-day event support

  vCalendar 1.0 cannot represent all-day events. The workarounds for
  mapping iCalendar 2.0 all-day events into vCalendar 1.0 was
  incomplete, leading to effects like shifting EXDATEs and end
  times.

* GTK-UI: accept service config with a username again (BMC#23106)

  Suppressing configs with empty username had undesired side effects:
  modifying configs for direct syncing with a device incorrectly
  triggered the same error message, without any means of entering
  a username. The faulty check was removed without replacement.

* GTK-UI: added GTK 3 version of UI

  When GTK 3 is found during compilation, a GTK 3 version of the
  UI is built. The source code of both is different to avoid
  excessive use of ifdefs. At the moment, both versions offer
  the same features. In the long run, the GTK 3 version will
  replace the GTK 2 version.

* command line: added refresh/one-way-from-local/remote (BMC #23537)

  The -from-client/server sync modes are confusing because the direction
  of the data exchange depends on which side acts as SyncML server or
  client.

  This release introduces new modes which use -from-local/remote
  instead. The statistics and messages also use these variants
  now. The old modes are still understood, but are declared as "not
  recommended" in the documentation.

* command line: config and source names are optional (BMC #23783)

  The need to add "foo" and "bar" pseudo config and source names to the
  command line even when all parameters for the operation where
  explicitly specified on the command line was confusing.

  Now it is possible to invoke item operations without the config and
  source name. Names which refer to non-existent configs are still
  accepted, as in previous releases. Typos are handled better by
  producing a detailed error report which includes (as applicable):
  - config doesn't exist
  - source doesn't exist or not selected
  - backend property not set

  Because luids used to be positional arguments after <config> and
  <source>, a new --luids keyword is necessary to indicate that the
  ensuing parameters are luids and not <config> and <source>.

* command line: introduced --print-databases, supported for CalDAV/CardDAV

  Listing databases is now a dedicated operation, instead of being done
  whenever syncevolution was invoked without parameters.

  Advantages:
  - can be combined with property assignments for backends
    which do not work without that additional information, for example
    CalDAV/CardDAV:
    syncevolution --print-databases \
                  backend=[caldav|carddav] \
                  syncURL=... \
                  username=... \
                  password=...
  - can be done for configured sources

* command line: use both stdout and stderr

  Traditionally, the "syncevolution" command line tool mixed its
  INFO/ERROR/DEBUG messages into the normal stdout. This has the major
  drawback that error messages get lost during operations like
     syncevolution --export - @default addressbook | grep "John Doe"

  Now anything which not the expected result of the operation is
  always sent to stderr. Obviously this includes ERROR messages. INFO
  and DEBUG are harder to decide. Because they usually convey meta
  information about the running operation, they are also sent to
  stderr. The output of running a sync goes to both stdout (summary)
  and stderr (progress).

* command line: allow setting empty properties

  Due to the way how properties were handled internally, it wasn't
  possible to explicitly set a property to its default value. Instead
  the property was unset. For example, explicitly setting database= was
  not possible.

  This is necessary for client-test and ActiveSync, because client-test
  needs to know that the testing is expected to run with the default
  databases (something which normally is avoided by overwriting empty
  database properties).

  Now the "is set" state is tracked explicitly in the config storage and
  command line property APIs. Unsetting a property via the command line
  could be implemented with an explicit command line option, but is not
  supported at the moment.

* command line + local sync: fixed erroneous "Comparison impossible" output.

  "Comparison impossible" was incorrectly printed after a successful
  comparison on the target side of local sync.

* synccompare: shorter data dump of PHOTO

  A full comparison of the base64 PHOTO data can be very long.
  Now some key characteristics of the PHOTO data (number of
  characters in base64 encoding, number of bytes in decoded
  data, md5sum of decoded data) are printed instead.

  That way, unintended changes of the data (different encoding,
  different content) should still be found while testing and
  added/removed photos are nicely visible in synccompare diffs.

* synccompare: fixed output for byte-identical duplicates

  If database dumps contained byte-identical duplicates, they
  were treated as a single item on the left side of a comparison.
  This caused erroneous "added" entries on the right side.

* secure password storage: usage of GNOME Keyring vs. KDE KWallet configurable

  Automatically detecting KDE users is not possible at the
  moment. Instead KDE users have to manually set the new "keyring"
  global config property to "KDE" (case insensitive) if the
  SyncEvolution installation supports both, because GNOME Keyring is the
  default to avoid surprises for traditional users. If only KWallet
  support is enabled, then this is not necessary.

  "GNOME" and "true/false/1/0/yes/no" can also be set. This has the
  advantage that keyring usage can be enabled permanently for the
  command line in --daemon=no mode; normally keyrings are not used in
  that mode because accessing them can bring up UI dialogs.

  It also becomes possible to disable keyring usage in syncevo-dbus-server,
  something which couldn't be done before.

  The --keyring command line option is still supported, as an alias for
  "[--sync-property] keyring=<value>". The default value for --keyring
  is true, to match the traditional behavior. In contrast to other sync
  properties, setting "keyring" does not require an explicit --run
  parameter. Again this is done to mirror traditional usage.

* Evolution: always create databases (PTCOM-113)

  Always try to create address book or calendar database, because even
  if there is a source there's no guarantee that the actual database
  was created already; the original logic for only setting this when
  explicitly requesting a new database therefore failed in some cases.

  This problem affected users who had never created anything locally
  and wanted to use SyncEvolution to migrate their data. Now that
  works without having to create dummy entries first.

* Evolution contacts: changed default sync format to vCard 3.0

  vCard 3.0 is the better default because it has saner encoding
  rules and defines more properties, thus avoiding the need for
  non-standard extensions. However, Mobical has problems with
  the new default. See upgrade instructions below.

* D-Bus server: made notification verbosity configurable with "notifyLevel"

  The new "notifyLevel" per-peer configuration option allows users to
  control how many desktop notifications the D-Bus server produces while
  executing an automatic sync:

  0 - suppress all notifications
  1 - show only errors
  2 - show information about changes and errors (in practice currently the same as level 3)
  3 - show all notifications, including starting a sync (default)

* CalDAV: updated Google workarounds

  Google started sending empty items (VCALENDAR with no VEVENT inside)
  which cannot be removed. SyncEvolution 1.3 ignores such items.

  The workaround for a 404 from Google Calendar for a GET (sending a
  REPORT request matching the item's UID) was broken: first, processing
  the result ended up calling the unset responseEnd boost function
  pointer, which caused the request to fail. Second, getting multiple
  items wasn't handled (data from all items concatenated together was
  used).

  That can happen in the somewhat unlike case that some items have a UID
  which is a complete superset of the requested UID - not realistic in
  real life, but happens during testing.

* WebDAV: bridge with SyncML

  Now a peer accessed via SyncML can read/write data stored in a
  CalDAV/CardDAV server directly. This can be used to connect a device
  which only supports SyncML to a CalDAV/CardDAV server, or sync data
  between a SyncML server and a CalDAV/CardDAV server. See "CalDAV and
  CardDAV" in the README for details.

* WebDAV: improved --configure

  Added INFO output about checking sources. This helps with WebDAV when
  the server cannot be contacted (dead, misconfigured) because otherwise
  there would be no indication at all why the --configure operation
  seems to hang.

  Here is some example output, including aborting:
  $ syncevolution --configure --template webdav \
                  syncURL=http://192.168.1.100:9000/ \
                  username=foo password=bar retryDuration=2s \
                  target-config@webdav-temp
  [INFO] creating configuration target-config@webdav-temp
  [INFO] addressbook: looking for databases...
  [INFO] addressbook: no database to synchronize
  [INFO] calendar: looking for databases...
  [INFO] calendar: no database to synchronize
  [INFO] memo: looking for databases...
  [INFO] memo: no database to synchronize
  [INFO] todo: looking for databases...
  [INFO] todo: no database to synchronize

  It timed out fairly quickly here because of the retryDuration=2s. That
  also gets placed in the resulting config, which is probably not desired.

  Aborting the operation is now supported:

  $ syncevolution --configure \
                  --template webdav \
                  syncURL=http://192.168.1.100:9000/ \
                  username=foo password=bar \
                  target-config@webdav-temp
  [INFO] creating configuration target-config@webdav-temp
  [INFO] addressbook: looking for databases...
  ^C[INFO] Asking to suspend...
  [INFO] Press CTRL-C again quickly (within 2s) to stop immediately (can cause problems in the future!)
  ^C[INFO] Aborting immediately ...
  [ERROR] error code from SyncEvolution aborted on behalf of user (local, status 20017): aborting as requested by user

  It would be good to make the CTRL-C handling code aware that it can
  abort immediately instead of doing the intermediate "asking to suspend"
  step, which only makes sense for sync sessions.

* WebDAV: support tasks and memos (BMC #24893)

  The new backend property values "CalDAVTodo" and "CalDAVJournal"
  select tasks resp. memos stored in a CalDAV collection. "CalDAV"
  continues to select events.

  Events, tasks and journals can be mixed in the same resource (=
  URL). However, this is less efficient than storing them separately.

  A good CalDAV server allows filtering items by type, and SyncEvolution
  uses that. However, it was found that Radicale 0.7 ignores this
  filtering, which could have led to data loss (SyncEvolution asks for
  all VTODOs in preparation for a "delete all items" operation in a
  "CalDAVTodo" source, gets also VJOURNALs, then deletes them).

  Therefore SyncEvolution plays it safe and downloads the VTODO and
  VJOURNAL data to double-check that it is working on the right items.
  This causes additional traffic for well-behaving servers; currently
  it cannot be turned off.

  Tasks are exchanged as vCalendar 1.0 or iCalendar 2.0 VJOURNAL.
  Memos are exchanged as VTODO or plain text. The logic for storing
  incoming plain text is slightly different compared to the way how
  the EDS memo backend did it: instead of copying the first line
  from the text into the summary, it is now moved. In other words,
  the first line gets stripped. The change is primarily technically
  motivated; both approaches have pros and cons.

* WebDAV: improved Radicale support

  Radicale > 0.7 will return status 200 for delete requests;
  is now treated like 204 by SyncEvolution. 412 'Preconditiona Failed'
  when asking to delete an already removed item is treated like
  the more common 404 'not found'. Same with 410 'gone' instead
  of 404 when trying to read a non-existent item.

* file backend: more flexible sync support for memos

  The databaseFormat=text/calendar for memos did not support
  synchronizing as plain text. When using the new
  databaseFormat=text/calendar+plain, vCalendar/iCalendar/plain text
  are all valid sync formats; the storage is iCalendar 2.0
  VJOURNAL in all cases.

* WebDAV: avoid potential crash during database detection

  When a server responds to a PROPFIND for a path with results for some
  other path, then SyncEvolution crashed during the search for the
  default calendar or address book because of a bug in the code which
  was meant to handle that kind of response. Apparently Yahoo Calendar
  did that. Now seen again in combination with Radicale 0.6.4.

  In general, the code was made more robust to cope with bugs in
  Radicale 0.6.4. Later Radicale versions fixed these issues and also
  worked with SyncEvolution 1.2.2 without client-side workarounds.

* WebDAV: better path normalization

  "syncURL" and "database" properties had to end in a trailing slash,
  otherwise items were not found (404 errors). Now the necessary slash
  is added automatically.

* Funambol: avoid slow syncs in refresh from server

  libsynthesis has traditionally implemented "refresh-from-server" as
  "delete local data" plus "slow" sync. This is more compatible, because
  some servers (like Google) do not support "refresh-from-server".

  But it has the downside that the server cannot know that the client
  won't send any data, and Funambol's OneMedia now only allows one slow
  sync before blocking the next one for a certain period of time. This is
  done to prevent excessive resource usage by badly behaving clients.

  To accomodate both kinds of servers, the new "enableRefreshSync"
  sync property can be set set to explicitly allow the usage of
  the "refresh-from-server" sync mode. It's off by default. The Funambol
  template has it turned on, existing configs must be updated manually
  (see upgrading comments below).

* Curl transport: support SSLServerCertificates=<path>

  When the setting refers to a directory, then CURLOPT_CAINFO doesn't
  work (must be a file). Check this and use CURLOPT_CAPATH instead.

  Caveat: there are some comments in the API documentation about "NSS
  enabled libcurl" which supports a directory in
  CURLOPT_CAINFO. Hopefully providing an explicit path in CURLOPT_CAPATH
  also works in that configuration.

* code cleanup + rewrite: syncing done in separate process

  syncevo-dbus-server now runs syncing in a separate process. Local
  sync also uses a second helper process. This makes the D-Bus server
  more responsive via D-Bus (no more blocking operations) and
  minimizes the effect of bugs in code involved with syncing
  (backends, system libraries, etc.).

  In the long term this restructuring will also allow more advanced
  features, like monitoring local or remote storage for changes.

* SyncEvolution <-> SyncEvolution sync: multiple cycles per session

  SyncML only allows one send/receive cycle per session. There are cases
  (for example, client side merges data that a dumber server failed to
  match correctly) where client and server are still out of sync at
  the end of a cycle. When SyncEvolution syncs with another SyncEvolution
  instance (locally or remotely), both sides detect that the peer
  can continue syncing in the same session and start over automatically
  when needed. Previously the user had to start another sync session manually.

  To the user this is shown as "number of cycles" in a sync session
  in the sync report. "Restart" is the process of entering a new cycle.

  The cycles are also visible in the command line output as multiple
  INFO lines:

    [INFO] eds_contact: starting first time sync from client (peer is server)
    [INFO] creating complete data backup of source eds_contact before sync (enabled with dumpData and needed for prin
    Local data changes to be applied during synchronization:
    *** eds_contact ***
    no changes

    [INFO] eds_contact: sent 1/1
    [INFO] eds_contact: started
    [INFO] eds_contact: first time sync done successfully
    [INFO] eds_contact: starting normal sync from client (peer is server)         <===
    [INFO] eds_contact: started                                                   <===
    [INFO] eds_contact: normal sync done successfully                             <===
    [INFO] creating complete data backup after sync (enabled with dumpData and needed for printChanges)

    Synchronization successful.

    Changes applied during synchronization:
    +---------------|-----------------------|-----------------------|-CON-+
    |               |         LOCAL         |        REMOTE         | FLI |
    |        Source | NEW | MOD | DEL | ERR | NEW | MOD | DEL | ERR | CTS |
    +---------------+-----+-----+-----+-----+-----+-----+-----+-----+-----+
    |   eds_contact |  0  |  0  |  0  |  0  |  1  |  0  |  0  |  0  |  0  |
    |   refresh-from-local, 2 cycles, 0 KB sent by client, 0 KB received  |
                            ^^^^^^^^
    |   item(s) in database backup: 1 before sync, 1 after it             |
    +---------------+-----+-----+-----+-----+-----+-----+-----+-----+-----+
    |          start Tue Feb  7 17:07:49 2012, duration 0:03min           |
    |               synchronization completed successfully                |
    +---------------+-----+-----+-----+-----+-----+-----+-----+-----+-----+

* SyncEvolution <-> SyncEvolution sync: negotiate UID support via SyncCap (BMC #22783)

  The semantic of UID/RECURRENCE-ID in calendar data is now tracked
  per data store involved in a sync. If full iCalendar 2.0 semantic
  (= IDs are globally unique) is guaranteed, then pairs are found
  based on these IDs. Otherwise pairs must be found by looking at
  item attributes.

  Previously a hack was used to detect this kind of support (any kind
  of SyncEvolution instance was assumed to support it, although some
  backends do not).

* syncevolution.org packages: fixed D-Bus server autostart in .deb and .rpm packages

  syncevo-dbus-server wasn't started automatically as part of a user
  session because /etc/xdg/autostart/syncevo-dbus-server.desktop wasn't
  included in the packages. This broke auto syncing after a session
  restart (required manually starting SyncEvolution).

* syncevolution.org packages: support KDE

  The traditional "syncevolution-evolution" package was
  replaced with "syncevolution-bundle". A meta "syncevolution-evolution"
  package depends on it, to support seamless updates for users who have
  "syncevolution-evolution" installed.

  Binary dependencies of the main .deb are ignored for backends
  because loading them is optional. The new "syncevolution-kde"
  package has the right dependencies for KDE/Akonadi, while
  "syncevolution-evolution" mostly just lists standard libs
  if the "EDS compatibility" mode is used, where libebook/libecal
  are loaded dynamically.

  Platform specific code (GNOME keyring, KDE wallet) was moved into
  loadable, optional modules, to allow installation of the SyncEvolution
  bundle without forcing the installation of unused system components.

* D-Bus: use GIO D-Bus instead of libdbus if available

  When compiling from source, the more modern GIO D-Bus is used instead
  of libdbus if available and recent enough (>= 2.30). syncevolution.org
  binaries still use libdbus, to stay compatible with older Linux
  distros.

* several minor bug fixes

  syncevo-dbus-server now runs under valgrind in the nightly testing,
  plus several more test scenarios were added. This helped to find
  and fix various minor memory handling issues.

* developers: backend API changes

  beginSync/endSync() (aka m_startDataRead/m_endDataWrite) may now be
  called multiple times per SyncSource instance life cycle. SyncSources
  derived from TrackingSyncSource should work without changes. Use the
  Client::Source::*::testChangesMultiCycles test to check whether your
  backend supports this correctly.

  Reading and deleting must throw a 404 status exception when an item
  is not found. The Client::Source::*::*404 tests cover this.

  The special semantic of the former RegisterSyncSource::InactiveSource
  (invalid pointer of value 1) caused bugs, like using it in
  --print-databases (=> segfault) or not being able to store the result
  of a createSource() directly in a smart pointer (=> potential leak in
  SyncSource::createSource()).

  Obviously a bad idea to start with. Replaced with a
  RegisterSyncSource::InactiveSource() method which creates a real,
  inactive SyncSource instance which can and must be deleted by the
  caller.

  This is a SyncSource API change for backend developers.  Instead of
  RegisterSyncSource::InactiveSource, return
  RegisterSyncSource::InactiveSource(). Comparisons against
  RegisterSyncSource::InactiveSource needs to be replaced with a call
  to the new SyncSource::isInactive().

  Long-running backend calls are encouraged to check for events on the
  main glib context (either in a loop or with
  g_main_context_iteration(NULL)) and abort when
  SuspendFlags::getSuspendFlags().getState() returns
  SuspendFlags::ABORT.

* packagers:

  libgdbussyncevo is now installed as a normal library in /usr/lib,
  even though SyncEvolution is the only user.

  pcrecpp is now a new hard dependency.


Upgrading from release 1.2.x:

The sync format of existing configurations for Mobical (aka Everdroid)
must be updated manually, because the server has encoding problems when
using vCard 3.0 (now the default for Evolution contacts):
   syncevolution --configure \
                 syncFormat=text/x-vcard \
                 mobical addressbook

The Funambol template explicitly enables usage of the
"refresh-from-server" sync mode to avoid getting throttled with 417
'retry later' errors. The same must be added to existing configs
manually:
   syncevolution --configure \
                 enableRefreshSync=TRUE \
                 funambol

Upgrading from releases before 1.2:

Old configurations can still be read. But writing, as it happens
during a sync, must migrate the configuration first. Releases >= 1.2
automatically migrates configurations. The old configurations
will still be available (see "syncevolution --print-configs") but must
be renamed manually to use them again under their original names with
older SyncEvolution releases.


SyncEvolution 1.2.1 -> 1.2.2, 13.01.2012
========================================

Maintenance release with various bug fixes.

* syncevo-dbus-server + ConnMan: fixed "online" detection (BMC #21541, BMC #24587)

  SyncEvolution did not recognize any cellular connectivity as
  suitable for syncing. The strict check for certain "connected
  technology" is unnecessary, anything which makes the computer
  "online" should be good enough. So now it just uses the ConnMan
  "State" property.

  Additional benefit: will continue to work with ConnMan 1.0, which
  won't have the "ConnectedTechnologies" property anymore.

  The Bluetooth available check was also (incorrectly) using the
  ConnMan API.  Now asssume that OBEX/Bluetooth is always available.

* automatic backups: added INFO messages and fixed dumpData/printChanges (BMC #24619)

  Point out that backups are created (user might be unaware otherwise
  and wonder about the delay), explain why (so that users know how to
  turn it off).

  Turning these backups off with dumpData=0 printChanges=0 had to be
  fixed, backups were always written previously.

* EDS compatibility: bumped version check for EDS 3.2

  SyncEvolution is known to work with EDS 3.2. Therefore use the
  libebook/ecal/edataserver libs from 3.2 if available, without
  warnings in the --version output. Also happens with inconsistent
  distro setups where the old libs are available and would have been
  prefered by SyncEvolution 1.2.1 even though the old libs no longer
  work with EDS 3.2.

* GTK-UI: do not accept service config without a username (BMC#23106)

  Instead of creating such a config, an error dialog is shown.

* GTK-UI: updated translations

* fixed various compile issues, primarily on Fedora Core 17
  (unistd.h/ssize_t, invoking syncevolution during compilation,
  missing src/dbus/qt/configure-sub.in)


SyncEvolution 1.2 -> 1.2.1, 25.11.2011
======================================

Maintenance release with various bug fixes.

* GTK UI + config: fix "custom server" setup (BMC #13511)

  When the "default" config template (= ScheduleWorld) was downgraded to
  "not consumer ready" in SyncEvolution 1.1.0.99.1, setting up a custom
  SyncML service in the GTK UI stopped working because the UI wouldn't
  show the "not consumer ready" config.

  The problem described above is deterministic and fixed now.
  Initially the problem seemed to be random. So perhaps there is
  also another, related issue.

* phone sync: delete<->delete conflict + phone calendar+todo sync (BMC #23744)

  When deleting an item on phone and locally, the next sync failed with
  ERROR messages about "object not found". Retrying the sync then worked.

* Nokia: prevent accidental usage of "calendar" or "todo" sources

  Nokia phones use a combined "calendar+todo" source for syncing. The
  "calendar" and "todo" sources also exist because that is where local
  databases are configured.

  In such a setup, syncing always has to use "calendar+todo". For example,
  to refresh from the Linux desktop to the phone, use:
       --sync refresh-from-server <config> calendar+todo

  To work with items (restore, show local content), use the underlying sources,
  as in:
       --print-items <config> calendar

  It was possible to accidentally sync with the "calendar". This commit
  prevents that by adding an invalid URI setting to the "calendar" and
  "todo" sources in the Nokia and Ovi templates. Existing configs are not
  touched, so beware when you already have configured your Nokia phone.

* vCard: X- chat extensions were limited to one instance per kind

  For example, only one Jabber account could be synchronized. This
  was caused by an incomplete definition of the conversion to and from
  vCard.

* syncevo-dbus-server + phone sync: catch SIGPIPE to avoid premature exit

  Frederik Elwert reported that running a local sync with a phone via
  Bluetooth caused the syncevo-dbus-server to shut down during a sync.
  Explicitly telling the process to ignore the SIGPIPE signal solved that
  problem.

* syncevo-http-server: support chained SSL certificates

  So far, the file pointed to by --certificate-file had to
  contain the server certificated (signed by a CA known to the client)
  and (optionally) a client certificate. Now the file may also contain
  additional intermediate certificates which will be sent to the client
  (chained certificates).

* documentation: added glossary and command line conventions sections,
  improved listing of properties, embedd property definitions in man page,
  README and README.html

* EDS compatibility: fixed inconsistency in libecal check

  The check for the _r variants in libical still used an older max
  version. This might have prevented using them (if not found) or
  could have led to a mixture of old and new libecal in the same
  process (probably crashed).

* glib: avoid including glib/*.h headers directly

  Recent glib deprecates the direct inclusion of some of its headers,
  in favor of including glib.h. Doing that here whenever possible, so
  perhaps it now compiles on Fedora 17 (untested).


SyncEvolution 1.1.1 -> 1.2, 13.10.2011
======================================

The major new feature of the 1.2 release is support for non-SyncML
protocols in general and CalDAV/CardDAV in particular. ActiveSync
support is in development and will be in 1.3. These protocols are
implemented as backends which are combined with other backends by
SyncEvolution in a so called "local sync". The GTK sync-ui does not
yet support configuring non-SyncML protocols. See the README.rst and
man page for more information on how to use the new feature via the
command line.

Properties not supported by SyncML servers can now be preserved
locally in two-way synchronization (BMC #15030). This depends on
information about what properties a SyncML server supports ("CtCap"),
which is typically not provided by servers. SyncEvolution contains a
copy of that information for Google Contacts (BMC #15029).

Akonadi backend and KWallet support were merged. They are not included
yet in syncevolution.org binaries. To use them compile from source.

The configuration format was updated to solve a conceptual problem
inherited with the legacy property names: the "type" property had
multiple, sometimes conflicting roles. For example, setting the
preferred data format for sync with one peer might have changed the
backend selection for some other peer (BMC #1023). Now
"backend/databaseFormat/syncFormat/forceSyncFormat" replace
"type". "type" is still accepted by the command line as alias.

Upgrading from releases before 1.2:

Old configurations can still be read. But writing, as it happens
during a sync, must migrate the configuration first. Release 1.2
automatically migrates configurations. The old configurations
will still be available (see "syncevolution --print-configs") but must
be renamed manually to use them again under their original names with
older SyncEvolution releases.


Other changes:

* Using the --sync-property and --source-property command line options is
  optional, just specifying the property assignment is enough.

* syncevo-http-server was enhanced considerably. See http://syncevolution.org/wiki/http-server-howto

* support NetworkManager API >= 0.9 (BMC #19470)

* syncevolution.org binaries: now compatible with Debian Testing/libnotify.so.4 (BMC #22668)

  libnotify is not linked directly into syncevo-dbus-server in the
  syncevolution.org binaries. Instead libnotify.so.1 till .so.4
  (current Debian Testing) are opened opened dynamically and the
  necessary functions are looked up via dlsym(). Not finding the
  libraries or the functions silently disables this notification
  mechanism.

* Sync mode is recorded when running in SyncML server mode (BMC #2786).

* syncevo-dbus-server automatically stops when some of its libraries
  are updated and restarts if auto-syncing is on (BMC #14955).

* Added code for Buteo, mKCal and QtContacts in MeeGo.

  Buteo and mKCal were removed again from MeeGo, so the code
  is obsolete. The QtContacts backend may be still be useful
  to access items via that API, but for syncing on MeeGo
  the normal EDS backend is used since MeeGo reverted back
  to EDS as PIM storage.

* "databasePassword" source property: lookup failure in keyring (BMC #22937)

  The databasePassword also wasn't looked up at all when doing item operations
  via the command line.

  When configuring sources for an HTTP server, the config name typically
  is just the context (@foo). When using the config in the HTTP server,
  the config name is the peer inside that context (client@foo). Because
  the GNOME keyring lookup keys for the "databasePassword" (more
  specifically, the object name) contained the full config name which
  was different in both cases, looking up the saved password failed.

  The solution is to normalize the config name (to accomodate for
  different ways of spelling it) and use only the context, with @ as
  before. This will break existing setups where the object name in the
  keyring (incorrectly) includes the full config name. In that case just
  configure the source again to set the password anew.

* Evolution Calendar: fixed detached recurrence support (BMC #22940)

  When manipulating a meeting series with more than one detached
  recurrence certain sequences of operations could incorrectly fail
  with "UID already exists".

* iCalendar 2.0: must set VALUE in EXDATE (part of BMC #22940)

  EXDATE has a VALUE parameter, which wasn't defined in the XML
  profile. Didn't seem to matter at all in practice, but wasn't
  standard-compliant.

* GTK sync-ui: wrap sync service descriptions (BMC #7199)

  Descriptions of different sync services are not fully visible unless
  word-wrapping gets enabled.

* CalDAV/CardDAV + local storage: avoid empty properties

  The main motivation for this change is that a recent Apple Calendar
  server rejects vCards with empty BDAY property. Another reason is that
  keeping the data as small as possible is desirable by itself.

  Sending an empty property serves as a hint for the peer that the
  property is supported. This is not necessary when storing an item in a
  backend. Therefore this commit disables empty properties for all
  backends which do not themselves set the m_backendRule Synthesis info
  value.

* Google Contacts: ensure that first/middle/name are set when storing in EDS (BMC #20864)

  Evolution and the MeeGo UX assume that first/middle/last name are set.
  That is not the case when a contact is created in the Google Contacts
  web interface. Such contacts are sent by Google without the N
  property.

  SyncEvolution now tries to recreate the name components from the FN
  string, by splitting at word boundaries and assuming "<first>
  <middle> <last>" or "<last>, <first>" format. Obviously this
  heuristic fails for some locales.

* Evolution Calendar: fixed error handling for broken TZIDs

* Sony Ericsson: use ISO-8859-1 for all devices (BMC #14414)

  Passing invalid UTF-8 strings into libecal caused glib to
  abort syncevo-dbus-server.

* auto sync: show all failed syncs except for temporary network errors (BMC #21888)

  Notifications were meant to be shown for all errors except temporary
  ones. This has never been implemented correctly since the feature was
  introduced: instead of hiding known temporary errors, all errors except
  500 (fatal error) were suppressed.

* vCard: inline local photo data (BMC #19661)

  Some platforms (Maemo, MeeGo) store photos in separate files. Now SyncEvolution
  efficiently includes that photo data in the generated vCard right before sending
  it to a peer; previously it sent a useless local file:// URI. The Maemo port
  has a less efficient workaround for that which now should be obsolete.

* syncevo-dbus-server: online status wrong without Network Manager or ConnMan (BMC #21543)

  When neither Network Manager nor ConnMan are running, network presence was "not
  online". This prevented running automatic syncs.


For developers:

* modified backend API
  - ClientTestConfig modernized
  - InsertItemResult::m_merged turned from boolean to enum

* testing and compilation changes; for example, the minimum version of
  libsynthesis is now checked at configure time instead of failing at
  runtime due to missing features in the Synthesis engine


SyncEvolution 1.1.99.7 -> 1.2, 13.10.2011
=========================================

Some more bug fixes and testing improvements.

* fixed potential invalid memory access in add<->add conflict handling
* fixed memory leak in workaround for EDS bug
* CalDAV/CardDAV: handle ETags without quotation marks (eGroupware)
* updated README: warning about sync direction moved to --sync option


SyncEvolution 1.1.99.6 -> 1.1.99.7, 15.09.2011
==============================================

Mostly bug fixes again. Some are a bit more intrusive, thus another
pre-release.

* syncevolution.org binaries: now compatible with Debian Testing/libnotify.so.4 (BMC #22668)

  libnotify is not linked directly into syncevo-dbus-server in the
  syncevolution.org binaries. Instead libnotify.so.1 till .so.4
  (current Debian Testing) are opened opened dynamically and the
  necessary functions are looked up via dlsym(). Not finding the
  libraries or the functions silently disables this notification
  mechanism.

* calendar sync: better handling for add<->add conflicts (partly fixes BMC #22783)

  When both sides of a sync have added the same event, the sync must
  determine which one is more recent instead of blindly overwriting
  always the same side.  Such conflicts are typically rare except for
  enterprise scenarios where meeting invitiations are processed
  automatically by a groupware (Exchange, Google Calendar/Mail, ...)
  and then the attendee status is updated on one side.

  SyncEvolution now does the necessary age comparison and preserves the more
  recent data for most properties. In some properties the data from both
  sides is preserved by concatenating the text (description, location, ...).
  It remains to be seen whether that is really desirable. Also, sync statistics
  are slightly off: the incoming item is counted as "added" even though it
  gets turned into an update.

* item operations: authentication problem for WebDAV when using keyring (BMC #21311)

  The password still wasn't looked up in the keyring when using
  --import/export/delete-items.

* "databasePassword" source property: lookup failure in keyring (BMC #22937)

  The databasePassword also wasn't looked up at all when doing item operations
  via the command line.

  When configuring sources for an HTTP server, the config name typically
  is just the context (@foo). When using the config in the HTTP server,
  the config name is the peer inside that context (client@foo). Because
  the GNOME keyring lookup keys for the "databasePassword" (more
  specifically, the object name) contained the full config name which
  was different in both cases, looking up the saved password failed.

  The solution is to normalize the config name (to accomodate for
  different ways of spelling it) and use only the context, with @ as
  before. This will break existing setups where the object name in the
  keyring (incorrectly) includes the full config name. In that case just
  configure the source again to set the password anew.

* Evolution Calendar: fixed detached recurrence support (BMC #22940)

  When manipulating a meeting series with more than one detached
  recurrence certain sequences of operations could incorrectly fail
  with "UID already exists".

* iCalendar 2.0: must set VALUE in EXDATE (part of BMC #22940)

  EXDATE has a VALUE parameter, which wasn't defined in the XML
  profile. Didn't seem to matter at all in practice, but wasn't
  standard-compliant.

* GTK sync-ui: wrap sync service descriptions (BMC #7199)

  Descriptions of different sync services are not fully visible unless
  word-wrapping gets enabled.

* source configs: don't check "backend" unless it is needed

  When using a config which has sources with a backend type set which is
  not currently available, an error was thrown even if those sources
  weren't even part of the current operation (for example, syncing
  another source which is currently supported).

* config migration: avoid name conflicts and auto syncing of old configs (BMC #22691)

  When (auto-)migrating a config, it was possible that a name for the
  peer, say foo.old, was chosen for the renamed config although there
  was already such a config, for example foo.old in ~/.sync4j. Besides
  being confusing for users, this also led to a bug in the code where it
  copied from the older config with the foo.old name.

  The main problem fixed is the disabling of auto syncing
  in the old config. Otherwise it was still used by syncevo-dbus-server
  for syncing, which triggered another auto-migration, ad infinitum...

* auto syncing: must check whether enabled when looking at unknown URLs (part of BMC #22691)

  "syncURL = insert your URL here" with "autoSync = 0" did lead to auto
  sync attempts although it wasn't enabled. A check for "auto syncing
  enabled" was missing for the "unknown transport" case.

* CalDAV/CardDAV + local storage: avoid empty properties

  The main motivation for this change is that a recent Apple Calendar
  server rejects vCards with empty BDAY property. Another reason is that
  keeping the data as small as possible is desirable by itself.

  Sending an empty property serves as a hint for the peer that the
  property is supported. This is not necessary when storing an item in a
  backend. Therefore this commit disables empty properties for all
  backends which do not themselves set the m_backendRule Synthesis info
  value.

* Apple CardDAV: apply PHOTO import/export scripts by default

  A recent Apple Calendar server (correctly) rejects the invalid
  PHOTO;TYPE=unknown: property in a vCard. This internal representation
  must be cleared before serializing the field list.

* for developers: modified backend API
  - ClientTestConfig modernized
  - InsertItemResult::m_merged turned from boolean to enum

* testing and compilation changes; for example, the minimum version of
  libsynthesis is now checked at configure time instead of failing at
  runtime due to missing features in the Synthesis engine


SyncEvolution 1.1.99.5 -> 1.1.99.6, 17.08.2011
==============================================

Mostly bug fixes, some improvements in testing and packaging. This
release was tested successfully with DAViCal 0.9.9.4.

* CalDAV: fixed incorrect change tracking causing "event not found" (BMC #22329)

* CalDAV: handle delete<->delete conflict during local sync (BMC #22327)

  If the same event was deleted both locally and in the CalDAV server, syncing
  failed with "event not found".

* Google Contacts: ensure that first/middle/name are set when storing in EDS (BMC #20864)

  Evolution and the MeeGo UX assume that first/middle/last name are set.
  That is not the case when a contact is created in the Google Contacts
  web interface. Such contacts are sent by Google without the N
  property.

  SyncEvolution now tries to recreate the name components from the FN
  string, by splitting at word boundaries and assuming "<first>
  <middle> <last>" or "<last>, <first>" format. Obviously this
  heuristic fails for some locales.

* CalDAV: continue despite Google Calendar access problems (see BMC #19484)

  An attempt to work around "403 You don't have access to change that
  event" errors, perhaps caused by
  http://code.google.com/p/google-caldav-issues/issues/detail?id=38
  The problem is now recorded instead of aborting the sync. The sync
  then ends in a 22001 = "partial failure" error and the operation
  will be retried in the next sync.

* CalDAV: transform UTC RECURRENCE-ID for Evolution (BMC #22594)

  Evolution showed a meeting twice on the day of a modified recurrence,
  if the meeting series was originally created and modified in Exchange,
  then imported into Google Calendar.

* CalDAV syncevolution.org binaries now works when libneon.so.27
  or libneon-gnutls.so.27 (Debian) are installed. Previously
  libneon.so.27 was required, which is no longer available in
  Debian Testing.

* syncevo-dbus-server/gdbus: fixed segfault when asked for properties
  when none are available (BMC #22152)

* Evolution Calendar: fixed error handling for broken TZIDs

* Sony Ericsson: use ISO-8859-1 for all devices (BMC #14414)

  Passing invalid UTF-8 strings into libecal caused glib to
  abort syncevo-dbus-server.

* item operations: authentication problem for WebDAV when using keyring (BMC #21311)

  The password wasn't looked up in the keyring when using --print-items/import/export/...

* WebDAV: fixed item operations without configuration (BMC #22164)

  Previously failed with "[ERROR] : virtual read-only configuration node, cannot write
  property webDAVCredentialsOkay = 1".

* auto sync: show all failed syncs except for temporary network errors (BMC #21888)

  Notifications were meant to be shown for all errors except temporary
  ones. This has never been implemented correctly since the feature was
  introduced: instead of hiding known temporary errors, all errors except
  500 (fatal error) were suppressed.

* vCard: inline local photo data (BMC #19661)

  Some platforms (Maemo, MeeGo) store photos in separate files. Now SyncEvolution
  efficiently includes that photo data in the generated vCard right before sending
  it to a peer; previously it sent a useless local file:// URI. The Maemo port
  has a less efficient workaround for that which now should be obsolete.

* syncevo-dbus-server: online status wrong without Network Manager or ConnMan (BMC #21543)

  When neither Network Manager nor ConnMan are running, network presence was "not
  online". This prevented running automatic syncs.

* fixed compile issues with Debian Testing/gcc 4.6.1


Known issues, might still be resolved for the final 1.2:
--------------------------------------------------------

* syncevolution.org binaries: libnotify1 -> libnotify4 incompatibility (BMC #22668)

  Newer distros no longer have the libnotify.so.1 that syncevolution.org
  binaries depend on. As a workaround it is possible to install the libnotify1
  package from older distro releases.

* CalDAV: add<->add conflicts (BMC #22669)

  Suppose the same meeting invitation for event UID=FOO is processed in
  both Evolution and Google Calendar. This always happens when the meeting
  invitation emails is sent to Google Mail, then later viewed in Evolution.
  On the Evolution side, the invitation is accepted. In Google Calendar this is
  still open.

  When syncing in that state the sync engine does not recognize that
  both sides have added the same meeting and the "meeting accepted"
  information eventually gets lost.

  As a workaround, always synchronize the calendar before processing
  meeting invitation emails.


SyncEvolution 1.1.99.1 -> 1.1.99.5, 13.07.2011
==============================================

Release 1.1.99.5 is the first release candidate for 1.2. It has gone
through a long stabilization period and thus is suitable for normal users.

The major new feature of the 1.2 release is support for non-SyncML
protocols in general and CalDAV/CardDAV in particular. ActiveSync
support is in development. These protocols are implemented as backends
which are combined with other backends by SyncEvolution in a so called
"local sync". The GTK sync-ui does not yet support configuring
non-SyncML protocols. See the README.rst and man page for more
information on how to use the new feature via the command line.

Properties not supported by SyncML servers can now be preserved
locally in two-way synchronization (BMC #15030). This depends on
information about what properties a SyncML server supports ("CtCap"),
which is typically not provided by servers. SyncEvolution contains a
copy of that information for Google Contacts (BMC #15029).

Akonadi backend and KWallet support were merged. They are not included
yet in syncevolution.org binaries. To use them compile from source.

The configuration format was updated to solve a conceptual problem
inherited with the legacy property names: the "type" property had
multiple, sometimes conflicting roles. For example, setting the
preferred data format for sync with one peer might have changed the
backend selection for some other peer (BMC #1023). Now
"backend/databaseFormat/syncFormat/forceSyncFormat" replace
"type". "type" is still accepted by the command line as alias.

Old configurations can still be read. But writing, as it happens
during a sync, must migrate the configuration first. In contrast to
earlier, more experimental releases in the 1.2 series, 1.1.99.5 and
later automatically migrate configurations. The old configurations
will still be available (see "syncevolution --print-configs") but must
be renamed manually to use them again under their original names with
older SyncEvolution releases.

Other changes:
* syncevo-http-server was enhanced considerably. See http://syncevolution.org/wiki/http-server-howto
* support NetworkManager API >= 0.9 (BMC #19470)
* Sync mode is recorded when running in SyncML server mode (BMC #2786).
* syncevo-dbus-server automatically stops when some of its libraries
  are updated and restarts if auto-syncing is on (BMC #14955).
* Using the --sync-property and --source-property command line options is
  optional, just specifying the property assignment is enough.
* Added support for Buteo, mKCal and QtContacts in MeeGo.
  Buteo and mKCal were removed again from MeeGo, so the code
  is obsolete. The QtContacts backend may be still be useful
  to access items via that API, but for syncing on MeeGo
  the normal EDS backend is used since MeeGo reverted back
  to EDS as PIM storage.
* code cleanup and various minor fixes/improvements, see ChangeLog


SyncEvolution 1.1 -> 1.1.1, 26.12.2010
======================================

Maintenance release, in particular improving syncing with phones.
There was a bug that could cause all kinds of weird behavior after
a failed sync with a phone, so updating is highly recommended.

* Synthesis engine: fixed a corruption issue in internal meta data which
  caused duplicates and other problems in a pretty indeterminstic way;
  apparently caused by failed syncs (BMC #11044).

* Synthesis engine: recurrence rules with end date now sent correctly to phones (BMC #11241).

  The RRULE property was not encoded correctly previously during the
  iCalendar 2.0 -> vCalendar 1.0 conversion. Events with recurrence count
  were okay. Probably also affected SyncML servers without iCalendar 2.0
  support.

  The fix was confirmed to work with Nokia phones. It also helps with Sony Ericsson
  phones, but at least the t700 still has a problem: depending on the phone's
  time zone, it repeats the event for one day too long (BMC #10092).

* Synthesis engine: fixed broken time zone information when sending to phone;
  previously that broke sending calendar updates to Nokia phones (BMC #9600).

  iCalendar 2.0 time zone definitions imported from libical were not
  encoded correctly in vCalendar 1.0 items as sent to phones. Nokia
  phones accepted such data when part of a new event, but rejected
  updates of it.

* Synthesis engine: shorter TZIDs, might help N900 calendar (BMC #6680).

  The shorter TZIDs will be included in iCalendar 2.0 data exported
  by libsyntesis and thus SyncEvolution. This change is motivated primarily
  by the observation that the N900 calendar storage can handle TZID=<location>,
  but not TZID=/softwarestudio.org/Tzfile/<location>.

* ScheduleWorld: disable configuration template because service has shut down.

  The template is only hidden from the GTK sync-ui, but remains in SyncEvolution
  for the time being because it is referenced in several places.

* Evolution CalDAV: added workaround for "must sync twice" (BMC #10265)

  The Evolution CalDAV backend seems to update its data when closing the
  database, not when opening it. As a result, syncevolution had to be run
  twice to see all data changes. The workaround is to open the database
  twice at the start of the sync. This is done for all calendar databases,
  regardless of which backend they use, in case that some other (yet unknown)
  backend needs the same workaround.

* GTK sync-ui: workaround for "Sync Now" button not reacting to online
  status changed (BMC #9949).

* Changed slow sync handling. Some users have complained about getting
  duplicated contacts (BMC #10081). The exact reason is not known (no
  useful logs provided yet), but it might be due to using "duplicate"
  as resolution strategy during slow syncs.

  This caused slightly different contacts to be duplicated instead of
  merging the two copies, reasoning that "no data loss" is better than
  "duplicates". This release switches to a mode where the engine
  tries harder to avoid duplicates by merging data if modification
  time stamps are available for contacts (usually they are). When fields
  differ, the more recent data is kept.

* convert absolute alarm back to relative (BMC #11233)

  Experiments show that at least Nokia phones (and thus perhaps also
  Mobical.com) interpret a fixed alarm as "repeat alarm with the same
  relative offset as on first occurrence". The same transformation to
  relative alarm times is applied whenever the transformation to
  absolute alarm is enabled for a peer.

* Sony Ericsson: enable conversion to absolute alarm times (BMC #10092)
    
  Like Nokia and Mobical.net, Sony Ericsson phones also seem to be unable
  to deal with relative alarm times - verified with t700.

* Sony Ericsson C510: workaround for SyncML violation

  The phone does not sent identifiers for the target database;
  using the source identifier as fallback allows a sync to
  run.

* Fixed a regression affecting users who had created a config
  with SyncEvolution < 1.0. Using the config worked once, then
  failed with "No configuration for ... found". Users must
  manually remove the empty "peers" directory inside their
  affected configuration, the fix only makes configs without that
  directory usable again (BMC #9381).

* Removed obsolete workaround for older mKCal calendar storage.
* Fixed error message in QtContacts backend.
* Same SYNCEVOLUTION_DEBUG code as in master branch.
* Some updates to synccompare, including a workaround for a Perl
  bug seen on Debian Testing with Perl 5.10.1-16 (Perl panic).
* Fix compilation of syncevo-dbus-server with libnotify 0.7.0 (BMC #10453).
* Fixed compilation on Debian GNU/Hurd (no MAX_PATH, Mac OS X confusion).


SyncEvolution 1.0.1 -> 1.1, 26.10.2010
======================================

An incremental update, resolving issues where the fixes would have
been too intrusive for a 1.0.x release. In particular compatibility
with Nokia phones was improved. Some new features were also included
(command line options for manipulating items, backends for MeeGo PIM
storages).

Details:

* bug fix in sync-ui: wrong direction of one-way data transfers with devices (BMC #7091)
* bug fix in syncevo-dbus-server: incorrect Presence status after config change (BMC #8453)
  Shows up in sync-ui as "'Sync Now' button active after creating a config while offline".
* sync-ui (GTK version): app is now listed as "SyncEvolution (GTK)" under "Office"
* Nokia phones: avoid data loss in two-way sync due to X-EVOLUTION-UI-SLOT (BMC #2566)
* Nokia phones: alarm times in UTC, sending PHOTO (BMC #1657, #5860)
* included all phone templates submitted to syncevolution.org Wiki (BMC #5727)
* syncevo-phone-config: set consumerReady in output, more useful for Wiki (BMC #3803)
* workaround for D-Bus timeouts in EDS libecal/libebook (BMC #4026)
* added generic command line options for importing, exporting, updating, listing
  and deleting items in the different backends (http://syncevolution.org/blogs/pohly/2010/manipulate-evolution-kcalextendedmkcal-qtcontacts-pim-items-uniform-command-line)
* added backends for mKCal and QtContacts (MeeGo PIM storage),
  meant to be used for manipulating this data on the command line
* enhanced D-Bus interface (BMC #3558, #3559, #3560, #3562, #3563, #7761, #7766)
* the command line tool now warns when running against a different D-Bus daemon (BMC #3563)
* creating and configuring sources in a context (without peer-specific
  properties) is now supported
* improved documentation: README.rst, man page, and --help output
* fixed some compile issues (BMC #6367), improved nightly testing


SyncEvolution 1.0 -> 1.0.1, 16.07.2010
======================================

A bug fix release. The main reason for releasing it is that
SyncEvolution 1.0 no longer worked on recent distros (Fedora Core 13,
Debian testing) because of a name clash between the Bluez D-Bus
utility code and recent glib.

Details:

* compile fix for FC 13 (and possibly others): use private copy of gdbus (BMC #3556)

* sync-ui: prevent overwriting device configs by accident (BMC #3566,1194)
  Setting up a phone used the template name as config name and overwrote
  an existing configuration of another phone that was created using that
  same template. Now the code uses the Bluetooth device name as set on the
  device and checks for (less likely) collisions. It also sanitizes the
  name to avoid complicated config names (only relevant when also using
  the command line).

* syncevo-dbus-server: accept 'application/vnd.syncml+xml; charset=UTF-8' for starting an HTTP session (BMC #3554) 
  The redundant charset specification was set by the Funambol
  Thunderbird client. Because of a literal comparison against
  'application/vnd.syncml+xml' the messages were rejected.

* config fix: operations on non-peer configs failed (BMC #3157)
  When running operations on a non-peer configuration (like --restore @default
  addressbook), the operation fails with
  [ERROR] <source name>: type 'select backend' not supported

* ZYB.com: service goes away end of June 2010, template removed (BMC #3310)
* some build (BMC #2586, BMC #3557) and language updates


SyncEvolution 0.9.2 -> 1.0, 11.06.2010
======================================

Major new features compared to previous stable release:
* synchronize directly with a phone over Bluetooth/OBEX
* accept Bluetooth/OBEX connections in cooperation with obexd >= 0.19
* run SyncEvolution as a rudimentary HTTP SyncML server

The GTK sync-UI can be used to select a paired phone and create a
configuration for it based on the bundled configuration templates.
Configuration templates are included for Nokia phones; for other
phones see the http://syncevolution.org/development/sync-phone HOWTO
and check out the Wiki there. Some users have already reported success
for Sony Ericsson phones and added setup instructions. New templates
from the Wiki can be dropped into ~/.config/syncevolution-templates
under an arbitrary file name.

Unexpected slow syncs can be detected when running as client (MB
#2416) and unless turned off (see "preventSlowSync"), SyncEvolution
aborts the session so that the situation can be analyzed. A refresh
from client or server might be more suitable. The command line tool
provides instructions at the end of its output. The GTK sync-UI
points towards its recovery dialog.

Automatic synchronization is supported by the syncevo-dbus-server (MB
#6378). When that is installed, it will be started as part of a user
session and keep running to trigger syncs in the
background. Notifications are emitted when syncs start, end or fail
(MB #10000).

Automatic synchronization can be enabled separately for each peer
("autoSync=0/1", off by default), will be done at regular intervals
("autoSyncInterval=30" minutes) when online long enough
("autoSyncDelay=5" minutes). That last option ensures that a) an
automatic sync does not attempt to use a network connection unless it
was already active and b) hopefully is also around long enough to
complete the sync.

The Synthesis XML configuration was split up into different parts
which are assembled from /usr/share/syncevolution/xml. Files in
~/.config/syncevolution-xml override and extend the default files,
which my be useful when adding support for a new phone.

SyncML servers:
* ZYB.com now works thanks to a workaround for anchor handling (MB #2424);
  only contacts tested because everything else is considered legacy by ZYB.com
* Horde: avoid confusing the server with a deviceId that starts like the
  ones used in old Funambol clients, helps with calendar sync (MB #9347)
* Mobical.net (and other, similar services): fix vCalendar 1.0 alarm
  properties before importing them (MB #10458)
* desknow.com works when switching to SyncMLVersion = 1.1
* Funambol, Memotoo (and probably others): preserve meeting series when
  receiving update for detached recurrence (BMC #1916)

Evolution:
* addressbook backend: avoid picking CouchDB, second try (MB #7877)
* calendar backend: minor fix for change tracking when deleting
  a single instance of a recurring event
* workaround for Evolution 2.30: "timezone cannot be retrieved because it
  doesn't exist" is triggered incorrectly when importing non-standard
  timezone definitions because libecal changed an error code (MB #9820)

Performance and reliability improvements (MB #7708):
* synccompare much faster
* database dumps consume less disk space
* more intelligent about expiring obsolete session directories
  and backups
* database accesses are reduced in several backends
* shorter logs (MB #8092)
* message resending helps under unreliable network connectivity ("RetryInterval")
* full support for suspend&resume in SyncEvolution client to SyncEvolution or
  Synthesis server syncs
* better handling of certain third-party time zone definitions (BMC #1332)

Improved GTK sync-UI:
* revised config screen: all in one list where entries can be expanded,
  integrated setup of sync with other devices
* recovery support: restore from backup, unexpected slow sync handling
* spinner while network is in use (MB #2229)
* interactive password requests (MB #6376)
* uses new D-Bus API

Command line:
* fixed printing of rejected items (MB #7755)
* consistent logging of added/updated/deleted items with short
  description
* improved error reporting (textual descriptions instead of plain
  error codes MB #2069, partial success MB #7755, record and show
  first ERROR encountered MB #7708)
* can create new sources (MB #8424)
* runs operations inside daemon and thus avoids conflicts with
  operations done by other clients; for testing purposes (like
  running a client which talks to a local server in the daemon) it is
  still possible to ignore the daemon (--daemon=no, MB #5043)
* revised README, now also available as man page (BMC #690)

Redesigned and reimplemented D-Bus API, used by sync-UI and command line:
* central syncevo-dbus-server controls configurations and sync sessions:
  http://syncevolution.org/development/direct-synchronization-aka-syncml-server
* accepts incoming SyncML connection requests and messages received by
  independent transport stubs (obexd, HTTP server, ...)
* can be used by multiple user interfaces at once
* fully documented, see src/dbus/interfaces and http://api.syncevolution.org
* no longer depends on dbus-glib with hand-written glue code for C++,
  instead uses gdbus plus automatic C++ binding generated via C++ templates

Revised configuration layout (MB #8048, design document at
http://syncevolution.org/development/configuration-handling):
* several peer-independent sync and source properties are shared
  between multiple peers
* they can be accessed without selecting a specific peer, by using an
  empty config name or with the new "@<specific context>" syntax
* user interface of command line unchanged
* old configurations can be read and written, without causing
  unwanted slow syncs when moving between stable and unstable
  SyncEvolution versions
* old configurations can be migrated with the "--migrate" command
  line switch; however, then older SyncEvolution can no longer
  access them and migrating more than one old configuration causes
  the second or later configuration to loose its "deviceId" property
  (which is shared now), causing a slow sync once
* config names may contain characters that are not allowed in the
  file names used for the underlying files; will be replaced with
  underscores automatically (MB #8350)


Upgrading from 0.9.x:

* Upgrading and downgrading should work seamlessly when using existing
  configurations.

* The new configuration layout is only used when creating new
  configurations or explicitly invoking "syncevolution --migrate" (see
  above). Such configs cannot be used by older SyncEvolution releases.

* The new "RetryInterval" property causes messages to be resent
  after 2 minutes (increased from 1 minute in previous 1.0 betas).
  At least the Funambol server is known to not handle this correctly
  in all cases (http://funzilla.funambol.com/show_bug.cgi?id=7910).
  So in the Funambol config template the interval is set to zero,
  disabling the feature. Disabling the feature must be done manually
  in existing Funambol configurations.


SyncEvolution 1.0 beta 3 -> 1.0 final, 11.06.2010
=================================================

Bug fixes and new features:

* Configuration templates are stored in a single file (BMC #1208).
  New templates (like something downloaded from http://syncevolution.org/wiki)
  can be dropped into $HOME/.config/syncevolution-templates using an arbitrary
  file name.
* Progress and per-source status are now also reported and recorded when
  running in server mode (BMC #1359). There are still several limitations
  (sync mode not reported, no information about sent/received/processed items
  while the sync runs, see BMC #2786).
* Better handling of certain third-party time zone definitions (BMC #1332).
  Better logging to track down such problems.
* D-Bus server + command line: return error code when failed (BMC #2193)
* syncevo-phone-config: simplified command line options, several bug fixes
  (syntax error, incorrect handling of calendar+todo, BMC #1197)
* Revised README, now also available as man page (BMC #690). Conversion of D-Bus API
  documentation into .html page (BMC #1745).
* Funambol, Memotoo (and probably others): preserve meeting series when
  receiving update for detached recurrence (BMC #1916)
* Fix for potential out-of-bounds memory access (BMC #1007).
* HTTP server: fix for potential crash when second session was requested while an
  older one was still running, initial sync was done without libical time zone
  information and thus may have mismatched times (BMC #2435)
* Nokia E55: convert alarm times (BMC #1657). This is done via a new remote rule
  in /usr/share/syncevolution/xml/remoterules/server/46_E55.xml
  If another phone needs the same treatment, then copy that file to
  ~/.config/syncevolution-xml/remoterules/server and edit the <model> element.
* GTK GUI: styling fix (BMC #1372), updated toolbar for MeeGo 1.0 (BMC #1970),
  avoid duplicating configs when selecting a config created by syncevo-phone-config 
  or the command line (BMC #1266), scroll bars for emergency window (BMC #1296),
  avoid compile problem on Fedora Core 13 due to name collision with system sync()
  call, updated translations.


SyncEvolution 1.0 beta 2 -> beta 3, 20.04.2010
==============================================

One more step towards the long awaited 1.0. 0.1 was released over four
years ago and the 1.0 cycle started some time last summer. Beta 3 is
considered feature complete at this point.

Automatic synchronization is supported by the syncevo-dbus-server (MB
#6378). When that is installed, it will be started as part of a user
session and keep running to trigger syncs in the
background. Notifications are emitted when syncs start, end or fail
(MB #10000).

Automatic synchronization can be enabled separately for each peer
("autoSync=0/1", off by default), will be done at regular intervals
("autoSyncInterval=30" minutes) when online long enough
("autoSyncDelay=5" minutes). That last option ensures that a) an
automatic sync does not attempt to use a network connection unless it
was already active and b) hopefully is also around long enough to
complete the sync.

Detecting online status depends on ConnMan. Without it, SyncEvolution
assumes that the network is available. For Bluetooth it is enough to
have a peer paired.

When SyncEvolution is compiled with a backend sync daemon
("syncevo-dbus-server"), then conceptually that daemon controls the
configuration and coordinates manually and automatically started sync
sessions. Previously, the command line tool bypassed the daemon by
running operations itself. Now it can hand over the command line
parameters to the daemon to be executed there ("--daemon=yes", the
default if the daemon is available; MB #5043). Command line parameters
and output of "syncevolution" are the same as before. Note that the
daemon only runs one operation at a time, which delays the command
line client when the daemon is busy. For testing purposes (like
running a client which talks to a local server in the daemon) it is
still possible to ignore the daemon (--daemon=no).

Thanks to fixes and improvements in both Synthesis engine and
SyncEvolution, suspend and resume are fully supported in client and
server (MB #2425). Previously it failed in some cases, as mercilessly
exposed by our automated testing. Now all of these tests pass. The
HTTP server now also handles message resends by clients correctly.

Direct synchronization with older phones (like Sony Ericsson K750i)
can be started now by switching to an older version of the SyncML
standard ("SyncMLVersion" property, MB #9312). No further
interoperability testing with such phones has been done at this
time. When acting as client, that same property allows talking to
older SyncML servers, like desknow.com.

A minor workaround and the right configuration make it possible to
synchronize with Nokia N85 and probably also other S60
devices. Added a template for "Nokia S60". Also made the template
for "Nokia N900" accessible in the GTK GUI.

Because determining which configuration works for a phone involves
a lot of trial-and-error, the new "syncevo-phone-config" script
automates that process.

Other changes:

* Mobical.net (and other, similar services): fix vCalendar 1.0 alarm
  specifications before importing them (MB #10458)
* Nokia N900: added a config template for it and disabled the redundant
  RespURI when using Bluetooth. Preliminary testing shows that this solves
  some of the issues seen before (MB #10224).
* workaround for Evolution 2.30: "timezone cannot be retrieved because it
  doesn't exist" is triggered incorrectly when importing non-standard
  timezone definitions because libecal change an error code (MB #9820)
* "syncevo-http-server" HTTP server script is included in normal install
* syncevolution.org binaries: finally solved the libbluetooth3
  incompatibility (MB #9289). Binaries of beta 2 crashed on more
  recent distros because of that.
* SyncML client and Bluetooth: a mobile device running SyncEvolution
  creates a configuration automatically (MB #6175). The peer contacting
  us has to use the standard SyncEvolution URIs (addressbook, calendar,
  todo, memo).
* command line: when dealing with the shared non-peer part of a config,
  it checks for properties which are unsuitable only prints
  those (MB #8048)
* GTK GUI: improved setup of devices, automatic sync switch,
  some fixes for crashes and other tweaks
* Nokia 7210c: send time as UTC instead of relying on time zone
  information (MB #9907).
* command line: setting up a configuration for a "SyncEvolution"
  server on a client was not possible because the "SyncEvolutionClient"
  configuration was picked instead (MB #10004). The latter has to
  be used when configuring a SyncEvolution server to talk to a
  SyncEvolution client.
* restore: no longer updates the time of the backup (MB #9963)
* various minor improvements and fixes, see ChangeLog

Upgrading:
* The new "RetryInterval" property causes messages to be resent
  after 2 minutes (increased from 1 minute in previous 1.0 betas).
  At least the Funambol server is known to not handle this correctly
  in all cases (http://funzilla.funambol.com/show_bug.cgi?id=7910).
  So in the Funambol config template the interval is set to zero,
  disabling the feature. Enabling or disabling the feature must
  be done manually in existing configurations.

SyncEvolution 1.0 beta 1 -> beta 2, 23.02.2010
==============================================

Several new features and some bug fixing. Despite some open issues
(see below), this release is ready for getting packaged in staging
areas of distros as replacement for 0.9.2.

As before, documentation for 1.0 is only available in the
"Development" section of syncevolution.org, including HOWTOs for
setting up the HTTP SyncML server and phones manually.

Setting up a phone became a bit easier with beta 2, because
SyncEvolution is now integrated with the GNOME Bluetooth panel: once a
device with SyncML client support is paired, a button offers to bring
up the sync-UI and configure or synchronize with that device. We do a
fuzzy match against the Bluetooth device name to find a suitable
template (not manufacturer/model, because that is not readily
available). Still not many (read: hardly any) templates available,
though.

The binaries on syncevolution.org are compiled with Bluetooth support.
libbluetooth2 or libbluetooth3 should be installed, but are not
essential. If there is no suitable version of it, the Bluetooth
channel has to be selected manually as part of the syncURL.

Unexpected slow syncs are prevented by default, in contrast to beta 1
where this feature was available but turned off. When an unexpected
slow sync is detected in a client, users have to follow the
instructions provided by the command line or sync-ui and choose how to
proceed (explicitly request slow sync, refresh from server or client,
restore from backup). SyncEvolution as server currently cannot prevent
slow syncs, even when initiating the sync with a phone.

In preparation for syncing automatically, logdir and database handling
was improved considerably. Backups use less disk space because
identical files share the same file content via hard links. This also
speeds up the synccompare Perl script. Database dumps and the
corresponding comparison are delayed until the session really runs,
which avoids doing needless work a) when the server a client tries to
contact is unreachable or down and b) by only including sources that
are really in use during a sync on the server side.

The Synthesis XML configuration was split up into different parts
which are assembled from /usr/share/syncevolution/xml. Files in
~/.config/syncevolution-xml override and extend the default files,
which my be useful when adding support for a new phone.
 

Summary of changes since 1.0 beta 1:

* sync-ui: recovery dialog (MB #8050), device setup, config usable with
  long strings (MB #9278), fixed displaying of source phases during sync
  (MB #9320)
* sync-ui + syncevo-dbus-server: integration with Bluez to detect paired
  devices (MB #9216, MB #7089), select template based on device name (MB #7838),
  detect network and Bluetooth connectivity (only with ConnMan, MB #7700),
  passwords stored in GNOME keyring by syncevo-dbus-server are shown with
  dots in sync-ui (MB #9169)
* Evolution addressbook backend: avoid picking CouchDB, second try (MB #7877)
* Evolution calendar backend: minor fix for change tracking when deleting
  a single instance of a recurring event
* build fixes: Bluetooth compatibility (MB #9289), use libical _r variant
  of calls because 0.43 has issues in the normal version, conflict with
  system libsynthesis and libsmltk (MB #9811)
* Horde: avoid confusing the server with a deviceId that starts like the
  ones used in old Funambol clients, helps with calendar sync (MB #9347)
* better reporting when SyncEvolution dies during a sync (only happend once
  when it wasn't installed properly, but still... MB #9844)
* performance improvements: synccompare much faster/database dumps consume
  less disk space/more intelligent about expiring obsolete session directories
  and backups/database accesses are reduced in several backends (MB #7708),
  shorter logs (MB #8092)
* slow sync detection: now also works in the case where the client detects
  an anchor mismatch and enabled by default (MB #2416)
* OBEX transport: some error handling changes and removal of polling, now
  also possible via sync-ui + syncevo-dbus-server (MB #9436)
* API changes: SyncSource introduces an "isEmpty" operation which is
  needed for the slow sync detection
* SyncML: split up configuration (MB #7712), increased default message size
  because the old one might have been too small for large DevInf structures
* several fixes for virtual data sources ("calendar+todo"): now works
  on client side, fixed naming on server (MB #9664), fixed error message
  for slow sync detection, supported in combination with sync-UI (MB #9535)
* fixes for shared configuration layout: finding sessions of peers in
  non-default context, adding sources affected peers in the same context
  (MB #9329), wrong context during --configure when using shortcut for peers
  in non-default context (MB #9338)


Known gaps for 1.0 final and beyond:

Redesigned and reimplemented D-Bus API, required by sync-UI:
- 'syncevolution' command line tool bypasses D-Bus server and runs
  sync sessions itself (MB #5043)
- availability of peers not detected when using NetworkManager
  (connected for HTTP, paired for Bluetooth; MB #7700)

SyncML server in general:
- suspend/resume support is untested (MB #2425)
- the progress events and statistics reported for a SyncML client
  are not generated when running as SyncML server, will require
  a fair amount of refactoring in the Synthesis engine (MB #7709)

HTTP SyncML server:
- a configuration must be created for each peer manually, including
  a remoteDeviceId value that contains the peer's SyncML device ID
  (MB #7838)

OBEX SyncML server ("sync with phones"):
- does not support phones which require a SAN 1.0 message (MB #9312)
- determining a working configuration for an unknown phone requires
  a bit of experimenting, which should be automated (MB #9862)

OBEX SyncML client:
- parsing of SAN message is rudimentary and depends on an existing local
  configuration, needs to be refined depending on which SyncML server software
  it is meant to work with (MB #6175)

Automatic sync (MB #6378):
- no support for the various server push notification mechanisms
- no intelligent detection of local changes
- no regular background sync, development is in progress

Upgrading from 1.0 beta 1: moving back and forth should work seamlessly
Upgrading from 0.9.x: see under beta 1


SyncEvolution 0.9.2 -> 1.0 beta 1, 26.01.2010
==============================================

Compared to the current stable release, 0.9.2, this beta release can also:
* synchronize directly with a phone over Bluetooth/OBEX
* accept Bluetooth/OBEX connections in cooperation with obexd 0.19
* run SyncEvolution as a rudimentary HTTP SyncML server

These feature were already available in a source-only 1.0 alpha
release. For the beta, we fixed some issues (nothing major)
and in addition to the source, also make binaries available. As
before, we hope to get feedback on where we are going with 1.0 and its
SyncML server and direct synchronization features. If you want to get
involved, now is a good time because a) there is something which works
and b) there is still time to influence the final 1.0, scheduled for
March 2010.

Documentation of the new features can be found in the "Development"
section (http://syncevolution.org/development) for HOWTOs or ask on
the mailing list (http://syncevolution.org/support).

Here is a more complete list of features compared to the stable
release. The full (and up-to-date) list can be retrieved from the
Moblin Bugzilla (MB) issue tracking system with this query:
http://bugzilla.moblin.org/showdependencytree.cgi?id=7892&hide_resolved=0
For changes compared to the 1.0 alpha please consult the
change log.

Implemented features are marked with a plus +, open ones with a minus -.

ZYB.com
+ now works thanks to a workaround for anchor handling (MB #2424)
- only contacts tested because everything is considered legacy
  by ZYB.com

Slow sync handling (MB #2416)
+ Unexpected slow syncs can be detected when running as client and
  if configured (see "preventSlowSync"), abort the session so that
  the situation can be analyzed. A refresh from client or server
  might be more suitable. Because this required manual intervention
  by the user, the feature is off by default.
- Catching slow syncs does not work yet when running as server and
  in one corner case in a client.

Improved sync-UI:
+ settings for HTTP servers are now done inside the list of
  all configs and server templates instead of poping up a
  separate window
+ uses the new D-Bus API
+ no longer uses private gconf key to select default peer,
  replaced by "defaultPeer" in SyncEvolution config
+ added recovery features like handling of unexpected slow syncs (MB #2416)
- restoring from backup only supported by command line (MB #8050)
- spinner to indicate network activity missing (MB #2229)
- interactive password request not implemented yet (MB #6376)

Command line:
+ fixed printing of rejected items (MB #7755)
+ improved error reporting (textual descriptions instead of plain
  error codes MB #2069, partial success MB #7755, record and show
  first ERROR encountered MB #7708)
+ can create new sources (MB #8424)

Redesigned and reimplemented D-Bus API, required by sync-UI:
+ central syncevo-dbus-server controls configurations and sync sessions:
  http://syncevolution.org/development/direct-synchronization-aka-syncml-server
+ accepts incoming SyncML connection requests and messages received by
  independent transport stubs (obexd, HTTP server, ...)
+ can be used by multiple user interfaces at once
+ fully documented, see src/dbus/interfaces
+ no longer depends on dbus-glib with hand-written glue code for C++,
  instead uses gdbus plus automatic C++ binding generated via C++ templates
- 'syncevolution' command line tool bypasses D-Bus server and runs
  sync sessions itself (MB #5043)
- availability of peers not detected (connected for HTTP, paired for
  Bluetooth; MB #7700)
- Bluetooth peers can only be configured via command line (MB #9216)

Revised configuration layout (MB #8048, design document at
http://syncevolution.org/development/configuration-handling):
+ several peer-independent sync and source properties are shared
  between multiple peers
+ they can be accessed without selecting a specific peer, by using an
  empty config name or with the new "@<specific context>" syntax
+ user interface in command line and D-Bus API unchanged
+ old configurations can be read and written, without causing
  unwanted slow syncs when moving between stable and unstable
  SyncEvolution versions
+ old configurations can be migrated with the "--migrate" command
  line switch; however, then older SyncEvolution can no longer
  access them and migrating more than one old configuration causes
  the second or later configuration to loose its "deviceId" property
  (which is shared now), causing a slow sync once
+ config names may contain characters that are not allowed in the
  file names used for the underlying files; will be replaced with
  underscores automatically (MB #8350)
- users of the sync-ui will not know about the --migrate option,
  so if they have only one configuration, it should be migrated
  automatically

SyncML server in general:
+ incoming connections are accepted by syncevo-dbus-server via
  the D-Bus Connection API; because this is a "personal SyncML
  server", all local data is meant to belong to a single user,
  and only one sync session can be active at any point in time
+ different users on the same machine can run their own server,
  as long as they ensure that listening for incoming connections
  does not conflict with each other (different port in HTTP)
+ the session of an HTTP client which stops sending messages expires
  after "RetryDuration" seconds instead of blocking the server
  forever (MB #7710)
- suspend/resume support is untested (MB #2425)
- automatic backup of server databases is inefficient (done
  even when client is not allowed to do a sync; always backs up
  all data, including sources which are not active; MB #7708)
- the progress events and statistics reported for a SyncML client
  are not generated when running as SyncML server, will require
  a fair amount of refactoring in the Synthesis engine (MB #7709)
- the Synthesis server example config contains workarounds for
  specific phones, but SyncEvolution does not currently use those;
  adding new workarounds should be made very simple (MB #7712)

HTTP SyncML server:
+ test/syncevo-http-server.py provides an experimental HTTP server
  based on Python and Twisted
- a configuration must be created for each peer manually, including
  a remoteDeviceId value that contains the peer's SyncML device ID
  (MB #7838)

OBEX SyncML server ("sync with phones"):
+ peers are contacted via a builtin transport that uses libopenobex (MB #5188)
+ Server Alerted Notification (SAN) message triggers syncs; server ID
  and URI are configurable (MB #7871)
- a configuration must be created for each peer manually, including
  a syncURL that contains the peer's MAC address (MB #7838)
- should be integrated into the system's Bluetooth pairing (MB #7089)

OBEX SyncML client:
+ obexd 0.19 contains a plugin which passes SyncML messages to syncevo-dbus-server
- parsing of SAN message is rudimentary and depends on an existing local
  configuration, needs to be refined depending on which SyncML server software
  it is meant to work with (MB #6175)

Automatic sync (MB #6378):
- no support for the various server push notification mechanisms
- no intelligent detection of local changes
- no regular background sync
- depends on safe handling of concurrent editing, which is blocked
  by merging of a new Evolution Data Server API (MB #3479)

Upgrading from 0.9.x:

* Upgrading and downgrading should work seamlessly when using existing
  configurations. But this being an alpha, better ensure that you have
  backups of both your data and your configurations in
  ~/.config/syncevolution.

* The new configuration layout is only used when creating new
  configurations or explicitly invoking "syncevolution --migrate" (see
  above). Such configs cannot be used by older SyncEvolution releases.


SyncEvolution 0.9.1 -> 0.9.2, 23.01.2010
========================================
Synthesis SyncML Engine version: see src/synthesis/ChangeLog

New Maemo 5/Nokia N900 calendar backend and packages, brought to you
by Ove Kaaven. These packages are available via the Maemo extras-devel
repository. Bug reports can be submitted both in http://bugs.maemo.org
and http://bugzilla.moblin.org. The latter is the tracker that is
monitored by the SyncEvolution team, which will also incorporate
patches. In general, Ove is the main maintainer of the new backend.

New XMLRPC backend, contributed by Franz Knipp/M-otion. It accesses
data inside a web service via a SOUP API and thus allows synchronizing
it via SyncML. See src/backends/xmlrpc/README for more information.

Added templates for Oracle Beehive and Goosync. Both are not currently
part of the regular testing.

In addition to that, 0.9.2 is an incremental update, with several
updated translations and addressing all of the issues reported by
users for 0.9.1:

- vCard dialects: added "X-GENDER/X-SIP" (used by Maemo) and X-SKYPE
  (used by Maemo and recent Evolution, MB #8948)

- Evolution Address Book: avoid picking CouchDB by default (MB #7877, evolution-couchdb #479110)

  CouchDB address books are appended at the end of the local database
  list, otherwise preserving the order of address books. The initial
  release of evolution-couchdb in Ubuntu 9.10 is unusable because it
  does not support the REV property.

  Reordering the entries ensures that the CouchDB address book is not
  used as the default database by SyncEvolution, as it happened in
  Ubuntu 9.10.  Users can still pick it intentionally via
  "evolutionsource".

- installation: templates now in $(datadir)/syncevolution/templates (MB #7808)
  This are files used internally, meant to be extended by distributors.
  Storing them in /etc is no longer supported, but also unlikely to be
  needed. Added warnings that these files cannot simply be copied into
  .config because they are not complete configurations.

- installation: "make install" populates $(docdir) (MB #7168)
  Previously README, COPYING, NEWS, and server READMEs were copied
  into syncevolution.org .tar.gz/.deb/.rpm archives as part of
  custom make rules and thus missing in other installations.

- building: --with-boost had no effect (MB#7856), detect incorrect
  use of --with-synthesis-src, workaround for lack of --with-docdir
  in older autoconf, do not unnecessarily depend on CPPUnit header
  files and GNOME/EDS libs (MB#8338), workaround for libtool bug
  ("cannot install `syncecal.la' to a directory not ending in ..."),

- clarified documentation of properties for file backend (MB#8146)
  
- stderr redirection: detect "error" messages and show them (MB#7655)
  The "GConf Error: Failed to contact configuration server..." error
  message was suppressed by the code which catches noise from libraries
  invoked by SyncEvolution. Now it is printed as ERROR, making it
  easier to detect why running SyncEvolution inside cron needs
  additional changes:
  http://www.estamos.de/blog/2009/05/08/running-syncevolution-as-cron-job/

- importing contacts from SyncML server without full name (MB#5664):
  Evolution expects the name to be set and shows an empty string if
  it is missing. Now the name is re-added by appending first, middle and
  last name.

- Evolution calendar: work around 'cannot encode item' problem (MB #7879)
  Happens when the calendar file contains broken events which reference
  a timezone that is not defined. Now the event is treated like one in
  the local timezone.

- "http_proxy" env variable is supported regardless which HTTP transport
  is used (MB#8177).

- avoid crashes when libecal sets neither error nor pointer (MB#8005)
  and when aborting a running sync in the syncevo-dbus-server (MB#8385)

- "--status" output: fixed missing total item counts (MB #9097)


Upgrading from 0.9.1:

* nothing to do, upgrading and downgrading should work seamlessly


SyncEvolution 0.9 -> 0.9.1, 26.10.2009
======================================
Synthesis SyncML Engine version: see src/synthesis/ChangeLog

Mobical and Memotoo are now officially supported.

Memotoo uses vCard 2.1 with several Evolution specific extensions. It
uses iCalendar 2.0, however, without actually supporting the advanced
features of it. Times are converted to UTC and meeting information are
lost.

Mobical uses vCard 2.1 and vCalendar 1.0 as data formats, with the
result that many properties used in Evolution are not supported by the
server.  In particular calendar support is very limited (known issues
when events are in time zones different from the one selected locally
and on the server, no support for meetings). For details see
README.mobical.

*** Beware *** that the Mobical SyncML password is *not* the same as
the one for their web site. Log into mobical.net, then go to "my accounts
>> configure new device >> manual settings" to find the SyncML
credentials.

It is now possible to compile database backends outside of
SyncEvolution, install them and have SyncEvolution use them
automatically like any other backend. The backend API has been
enhanced considerably. For example, backend developers have
access to a modular set of utility classes that can be mixed
into a specific implementation. Backends can access the internal
Synthesis representation directly and therefore no longer need
their own vCard/vCalendar/iCalendar parser.

The sqlite demo backend can be enabled and compiled again with
--enable-sqlite. It demonstrates how to map directly from the
Synthesis field list to some internal format (an SQLite database
schema in this case).

Other changes:

* Resend messages to cope with intermittent loss of network
  connectivity (Moblin Bugzilla #3427). See the new "ResendDuration"
  and "ResendDelay" configuration properties for details.

* SyncEvolution command line uses the GNOME keyring when
  the new --keyring option is given.

* The logging of added and updated items was enhanced. Events,
  tasks and memos are logged with a short description instead of
  just the local ID. The description for contacts was improved.

* Receiving photos from Mobical failed because Mobical
  does not quite follow the vCard 2.1 (Moblin Bugzilla #6668).
  Sending photos worked, but added a few bytes of garbage
  at the end of each photo (typically ignored when showing).
  Parser was made more tolerant by Synthesis and encoder bug
  was fixed.

* Task priorities used by Mobical and Evolution did not match:
  vCalendar 1.0 uses 1-3, iCalendar 2.0 uses 1-9 (MB #6664).
  SyncEvolution now translates between the two ranges, with
  some information getting lost when talking to a peer which
  only supports the smaller range.

* Importing work and home phone numbers from Google into desktop
  Evolution works better, because SyncEvolution now adds the "VOICE"
  flag expected by Evolution (MB#6501).

* SSL certificate checking with Google is enabled by default
  and enabled in Moblin, because libsoup in that distro has
  the necessary fix. Without that fix, all connection attempts
  fail. The binaries on syncevolution.org are compiled with
  --disable-ssl-certificate-check, so users who want the
  additional security must enable it.

* .rpms on syncevolution.org no longer specify a dependency
  on certain Perl features. This depencency was a problem on
  Mandriva. Unwanted hard dependencies on libecal in syncevolution.org
  binaries are avoided for real this time (MB#6552).

* Some sync-UI enhancements (describe sync services, avoid crash
  with very long input in some of the text boxes (MB#5219), set
  application icon, improved some strings).

* sync-UI: now disables sources which are not supported when
  setting up a configuration, like memos on Moblin (MB #6672).
  Previously the source was enabled, which prevented using
  using the configuration as-is on the command line.

* The sync UI allowed to enable calendar and task synchronization
  with Google although Google does not support that (MB#5871).
  In new installations this is prevented by clearing the URI
  for those data categories.

* Trying to remove a non-existent configuration via the command
  line now raises an error, to catch typos (MB #6673).

* Improved checks which logs in the logdir belong to the current
  server (MB#5215).

* Improved sanity checking of integer configuration parameters
  (MB#6500).

* Spelling fix: "aboring" => "aborting"


Known issue:

* Mobical and Memotoo do not have a description in the GUI yet.

* ZYB.com is not supported because of a known anchor handling
  problem in the server (MB#2424).


Upgrading from 0.9:

* nothing to do, upgrading and downgrading should work seamlessly


SyncEvolution 0.9.1 beta 2 -> 0.9.1, 26.10.2009
===============================================
Synthesis SyncML Engine version: see src/synthesis/ChangeLog

Minor changes:

* spelling fixes in NEWS file (--source-type => --source-property)
* update to zh_CN
* improved autotools compilation of libsynthesis


SyncEvolution 0.9.1 beta 1 -> 0.9.1 beta 2, 19.10.2009
======================================================
Synthesis SyncML Engine version: see src/synthesis/ChangeLog

Several fixes:

* Receiving photos from Mobical failed because Mobical
  does not quite follow the vCard 2.1 (Moblin Bugzilla #6668).
  Sending photos worked, but added a few bytes of garbage
  at the end of each photo (typically ignored when showing).
  Parser was made more tolerant by Synthesis and encoder bug
  was fixed.

* Task priorities used by Mobical and Evolution did not match:
  vCalendar 1.0 uses 1-3, iCalendar 2.0 uses 1-9 (MB #6664).
  SyncEvolution now translates between the two ranges, with
  some information getting lost when talking to a peer which
  only supports the smaller range.

* The workaround for detecting an endless stream of Alert 222
  messages (caused by misbehavior of certain servers when
  a specific message has to be resent) aborted certain
  valid (albeit somewhat pathologic) sync sessions. Improved
  the heuristic so that it still catches the real loop without
  aborting in that other case.

* sync-ui: now disables sources which are not supported when
  setting up a configuration, like memos on Moblin (MB #6672).
  Previously the source was enabled, which prevented using
  using the configuration as-is on the command line.

* .rpms on syncevolution.org no longer specify a dependency
  on certain Perl features. This depencency was a problem on
  Mandriva. Unwanted hard dependencies on libecal in syncevolution.org
  binaries are avoided for real this time (MB#6552).

* Trying to remove a non-existent configuration via the command
  line now raises an error, to catch typos (MB #6673).

* Message resend options: added sanity checks to catch negative
  values, clarified that duration is given in seconds, 0s resend
  interval disables resending (MB #6500).

* Spelling fix: "aboring" => "aborting"


SyncEvolution 0.9 -> 0.9.1 beta 1, 06.10.2009
=============================================
Synthesis SyncML Engine version: see src/synthesis/ChangeLog

Mobical and Memotoo are now officially supported.

Memotoo uses vCard 2.1 with several Evolution specific extensions. It
uses iCalendar 2.0, however, without actually supporting the advanced
features of it. Times are converted to UTC and meeting information are
lost.

Mobical uses vCard 2.1 and vCalendar 1.0 as data formats, with the
result that many properties used in Evolution are not supported by the
server.  In particular calendar support is very limited (known issues
when events are in time zones different from the one selected locally
and on the server, no support for meetings). For details see
README.mobical.

*** Beware *** that the Mobical SyncML password is *not* the same as
the one for their web site. Log into mobical.net, then go to "my accounts
>> configure new device >> manual settings" to find the SyncML
credentials.

It is now possible to compile database backends outside of
SyncEvolution, install them and have SyncEvolution use them
automatically like any other backend. The backend API has been
enhanced considerably. For example, backend developers have
access to a modular set of utility classes that can be mixed
into a specific implementation. Backends can access the internal
Synthesis representation directly and therefore no longer need
their own vCard/vCalendar/iCalendar parser.

The sqlite demo backend can be enabled and compiled again with
--enable-sqlite. It demonstrates how to map directly from the
Synthesis field list to some internal format (an SQLite database
schema in this case).

Other changes:

* Resend messages to cope with intermittent loss of network
  connectivity (Moblin Bugzilla #3427). See the new "ResendDuration"
  and "ResendDelay" configuration properties for details.

* The logging of added and updated items was enhanced. Events,
  tasks and memos are logged with a short description instead of
  just the local ID. The description for contacts was improved.

* The sync UI allowed to enable calendar and task synchronization
  with Google although Google does not support that (MB#5871).
  In new installations this is prevented by clearing the URI
  for those data categories.

* Importing work and home phone numbers from Google into desktop
  Evolution works better, because SyncEvolution now adds the "VOICE"
  flag expected by Evolution (MB#6501).

* SyncEvolution command line uses the GNOME keyring when
  the new --keyring option is given.

* SSL certificate checking with Google is enabled by default
  and enabled in Moblin, because libsoup in that distro has
  the necessary fix. Without that fix, all connection attempts
  fail. The binaries on syncevolution.org are compiled with
  --disable-ssl-certificate-check, so users who want the
  additional security must enable it.

* syncevolution.org binaries should be compatible with a wider
  range of Evolution releases again (MB#6552).

* Some sync UI enhancements (describe sync services, avoid crash
  with very long input in some of the text boxes (MB#5219), set
  application icon, improved some strings).

* Improved checks which logs in the logdir belong to the current
  server (MB#5215).

* Improved sanity checking of integer configuration parameters
  (MB#6500).

Known issue:

* Mobical and Memotoo do not have a description in the GUI yet.

* ZYB.com is not supported because of a known anchor handling
  problem in the server (MB#2424).


SyncEvolution 0.8.1 -> 0.9, 12.08.2009
--------------------------------------
Synthesis SyncML Engine version: see src/synthesis/ChangeLog

This is a major new release, with first steps towards further improvements.
From this release on, the Synthesis SyncML engine will be the
underlying SyncML and data conversion engine.

A native GTK GUI is now included. The "sync-ui" program depends on a
backend D-Bus service ("synevo-dbus-server") and several auxiliary
files. Therefore, it only runs without hacks after installation in 
/usr (possible with .deb, .rpm and binary .tar.gz archives, and
with "sudo make install", after compiling from source). The
normal command line tool still works without being installed.

In this release, the data handling model was changed from "all items
are sent verbatim to the SyncML server" to "parse and convert". The
argument for the former approach was that the SyncML server should be
the only entity in the system which does data conversion. The previous
releases already had to deviate from this approach to accommodate for
minor client/server incompatibilities and for vCard 2.1 support, so the
new approach just takes it one step further.

The main reason for going to full semantic conversion is vCalendar 1.0
support. Support by servers for iCalendar 2.0, the only format
supported by 0.8.1, is often still incomplete or even non-existent. By
doing the conversion on the client side, SyncEvolution is now able to
synchronize events and tasks with a wider variety of servers.

It is still true that properties not supported by a server cannot
be synchronized to other devices, so using a server with full
iCalendar 2.0 support is recommended. But in contrast to 0.8.1,
information that can be stored only locally is no longer lost when
receiving an incomplete update from the SyncML server, thanks to
intelligent merging, provided by the Synthesis engine. This depends on
an accurate description of the server's capabilities, which might not
be provided by all of them. This still needs to be tested in more detail.

Interoperability with servers tested extensively in this release.
The following servers are now supported:

* ScheduleWorld. There is very complete support for Evolution data. The
  only known issues are around resuming from an interrupted sync.

* Google contact sync.

  Google follows the vCard 2.1 specification, and thus does not support
  some of the vCard 3.0 additions, nor some of the common extensions. As
  a result, several properties are not synchronized (nickname, birthday,
  spouse/manager, URLs, ...). Only one top-level organization seems to
  be supported. For details, see README.google.

  Regarding Google's SyncML support, refresh-from-client and
  one-way-from-client sync modes are not supported. Deleting contacts
  moves them out of the main address without deleting them permanently. When
  adding such a contact again, the server discards the data sent by the
  client and recreates the contact with the data that it remembered.

  Because SSL certificate checking for Google works only with libsoup
  if the platform has a patched libsoup
  (http://bugzilla.gnome.org/show_bug.cgi?id=589323) or libsoup >=
  2.28, certificate checking remains turned off by default for
  Google. If your platform has a suitable libsoup (like Moblin 2.0),
  then enable checking with:

  syncevolution --configure \
                --sync-property SSLVerifyServer=true \
                --sync-property SSLVerifyHost=true \
                google

* Funambol, with calendar and task support. Funambol supports iCalendar 2.0
  in the current server, so this is enabled in the configuration template.
  Not all iCalendar 2.0 features are supported by the server,
  most notably support for meetings (drops attendees), meeting
  invitations (drops UID), detached recurrences
  (drops RECURRENCE-ID). See README.funambol for details.

  Interoperability with the Funambol server was improved by adding
  support for some vCard extensions (X-MANAGER/ASSISTANT/SPOUSE/ANNIVERSARY,
  #2418). Lost ACTION property has a work around (#2422).

  To enable that support in an existing configuration so that it
  exchanges items in the more suitable iCalendar 2.0 format, use:

  syncevolution --configure --source-property sync=two-way \
                funambol calendar todo
  syncevolution --configure --source-property type='calendar:text/calendar!' \
                funambol calendar
  syncevolution --configure --source-property type='todo:text/calendar!' \
                funambol todo

  Without the exclamation mark, format auto-negotiation would pick the
  less capable vCalendar 1.0 format because that is marked as preferred
  by the server.


*** WARNING ***: After switching from a previous release to the
current one, or vice versa, do a "syncevolution --sync
refresh-from-server" or "--sync refresh-from-client" (depending on
which side has the authoritative copy of the data) once, to get client
and server into a consistent state. Not doing so can result in
applying the same changes to the server multiple times, and thus
duplicates.

Other changes in detail:

* vCalendar 1.0 is now supported.

* Both libcurl and libsoup can be selected at compile time as HTTP(S)
  transport mechanism.

* SF #2101015: Expect: 100-continue header results in 417 Error with proxy.
  Should no longer occur with the HTTP transports in this release.

* SF #1874805: Syncing with Funambol results in loosing all-day property.
  This now works thanks to the Synthesis data conversion rules.

* SF #2586600: Synchronisation with mobical.net fails in 0.8.1.
  Works now, but there are some known issues (Bugzilla #3009)
  and therefore mobical.net is not officially supported yet.

* SF #2542968: Separator for categories should not be escaped.
  Done correctly by the Synthesis vcard conversion.

* bug fix: Evolution notes with only a summary and no description were
  not sent correctly to the server. Instead of sending the summary,
  an empty text was sent. 

* CTRL-C no longer kills SyncEvolution right away. Instead it
  asks the server to suspend the session. If that takes too
  long, then pressing CTRL-C twice quickly will abort the sync
  without waiting for the server (Warning, this may lead to a
  slow sync in the next session).

* WBXML is enabled by default now, except for Funambol (#2415).
  Using WBXML reduces message sizes and increases parsing
  performance.

* New configuration templates can be added to
  /etc/default/applications/syncevolution. These templates may contain
  icons, which are used by the GUI (no icons shipped right now).

* Information about previous synchronization sessions is now stored in a
  machine-readable format and can be accessed using the new
  --print-sessions options. The output of this information is more
  complete and more nicely formatted.

* --status now shows not only data changes since the last sync, but also
  item changes (see README for the difference between the two).

* The new --restore option allows restoring local data to the state as
  it was before or after a sync. For this to work, "logdir" must be set
  (done by default for new configurations). The format of database dumps
  was changed to implement this feature. Instead of in a flat file,
  items are now saved as individual files in a directory. To get the
  previous format back (for example, to import as one .vcf or .ics file
  manually) concatenate these files.

* With –-remove, one can remove configurations. It leaves data files and
  the local databases untouched.


Known issues:

* The GUI includes the number of locally deleted items during a
  refresh-from-server sync in the number of "received changes"
  (#5185), which is a bit misleading. This is a result of #3314,
  which introduced changes not "received" from the server.

* When a network error occurs and the client
  never notices that the connection to the server was lost, 
  it will hang forever, waiting for the server's reply (#3427).

* The file backend now works only for data formats understood
  by SyncEvolution and the Synthesis engine. Items are parsed
  when exchanging them among the backend, engine, and server,
  in contrast to 0.8.1, where item content was not touched
  locally (#5046).

* The ZYB.com server sends conflicting sync anchors, so
  most syncs don't work as expected (#2424).


SyncEvolution 0.9 beta 3 hotfix -> 0.9 final, 12.08.2009
--------------------------------------------------------

Because SSL certificate checking for Google only works with libsoup if
the platform has a patched libsoup
(http://bugzilla.gnome.org/show_bug.cgi?id=589323) or libsoup >= 2.28,
certificate checking remains turned off by default for Google. If your
platform has a suitable libsoup (like Moblin 2.0), then enable
checking with:

  syncevolution --configure \
                --sync-property SSLVerifyServer=true \
                --sync-property SSLVerifyHost=true \
                google

Only minor changes:
* updated translations
* refresh-from-server syncs now report how many items were
  deleted locally at the start of the sync (Bugzilla #3314).
  The GUI includes the number of locally deleted items during a
  refresh-from-server sync in the number of "received changes",
  which is a bit misleading (#5185).
* fixed build issue on Fedora 11/g++ 4.4 (Bugzilla #5061)
* some build and test improvements
* proper fix for D-Bus error functions (#4919)
* improve sync-ui startup time by avoiding an unnecessary
  copying of the sync config into itself (#5021)
* adapted tooltip style (used for SyncML server links) to new
  Moblin theme, they weren't visible earlier (#5017)
* notify zone selector in Moblin 2.0 about sync-ui startup (#4752)
* sync-ui: minor layout change for fatal error situation


SyncEvolution 0.9 beta 3 -> 0.9 beta 3 hotfix, 23.07.2009
---------------------------------------------------------

Found additional Google limitation: the server drops photos if they
exceed a certain size. The limit is somewhere between 40KB (okay) and
80KB (dropped).

The last-minute workaround for Google/libsoup/gnutls (using http)
didn't work because apparently Google only supports SyncML over https
(Bugzilla #4551).  Now the default configuration template uses https
with all certificate checking disabled. A patch for libsoup was
submitted to upstream.

Some error messages by the "syncevolution" command line tool were not
printed (#4676). The root cause was the intentional interception of
stderr to hide the noise printed by various system libraries
(#1333). Unfortunately remarks about incorrect command line options
were among swallowed messages. No good workaround available short of
disabling the redirection with SYNCEVOLUTION_DEBUG=1, so let's release
an update...

Other changes:
* updated translations


SyncEvolution 0.9 beta 2 -> 0.9 beta 3, 21.07.2009
--------------------------------------------------
Synthesis SyncML Engine version: see src/synthesis/ChangeLog

Enabled calendar and task synchronization for myFunambol.com.
Not all iCalendar 2.0 features are supported by the server,
most notably support for meetings (drops attendees), meeting
invitations (drops UID), detached recurrences
(drops RECURRENCE-ID). See README.funambol for details.

Interoperability with the Funambol server was improved by adding
support for some vCard extensions (X-MANAGER/ASSISTANT/SPOUSE/ANNIVERSARY,
Bugzilla #2418). Lost ACTION property is worked around (#2422).

Synchronization with Google Contacts was enabled and tested.
A configuration template for that server is now provided. Google
follows the vCard 2.1 specification and thus does not support some
of the vCard 3.0 additions, nor some of the common extensions. As
a result, several properties are not synchronized (nickname, birthday,
spouse/manager, URLs, ...). Only one top-level organization seems to
be supported. For details, see README.google.

Regarding Google's SyncML support, refresh-from-client and
one-way-from-client sync modes are not supported. Deleting contacts
moves them out of the main address without deleting them permanently. When
adding such a contact again, the server discards the data sent by the
client and recreates the contact with the data that it remembered.

SSL certificate checking with libsoup (the default transport) is now
supported (#2431). However, libsoup/gnutls are very strict about SSL
certificate checking and reject version 1 certificates, like the one
used by Verisign for Google (#4551). At the moment the only solution
is to fall back to plain http in the Google configuration template.

CTRL-C no longer kills SyncEvolution right away. Instead it
asks the server to suspend the session. If that takes too
long, then pressing CTRL-C twice quickly will abort the sync
without waiting for the server (warning, this may lead to a
slow sync in the next session).

WBXML is enabled by default now, except for Funambol (#2415).
Using WBXML reduces message sizes and increases parsing
performance. It was not enabled initially in the 0.9 releases in order
to test this new feature more thoroughly. Old configs don't have an
explicit enableWBXML setting and therefore will automatically use the
new default.

Various bug fixes and improvements:

* only show servers in GUI which are tested and supported (Bugzilla #3336)
* a single log file is written in .html format (#3474)
* added several translations of the GUI
* lots of testing improvements, build binary packages again

UPGRADING

When enabling calendar and todo synchronization with Funambol
in an existing configuration, set the type so that iCalendar 2.0 is used:
  syncevolution --configure --source-property sync=two-way funambol calendar todo
  syncevolution --configure --source-property type='calendar:text/calendar!' funambol calendar
  syncevolution --configure --source-property type='todo:text/calendar!' funambol todo

When creating a configuration anew, this is not necessary because the
configuration template contains those types.


SyncEvolution 0.9 beta 1 -> 0.9 beta 2, 12.06.2009
--------------------------------------------------
Synthesis SyncML Engine version: see src/synthesis/ChangeLog

Major new feature: a GTK GUI! The "sync-ui" program depends on a
backend D-Bus service ("synevo-dbus-server") and several auxiliary
files. Therefore it only runs without hacks after "sudo make install",
in contrast to the normal command line which can be invoked directly.

New configuration templates can be added to
/etc/default/applications/syncevolution. These templates may contain
icons which are used by the GUI (no icons shipped right now).

Information about previous synchronization sessions is now stored in a
machine-readable format and can be accessed via the new
--print-sessions options. The output of this information is more
complete and nicer formatted.

--status now not only shows data changes since the last sync, but also
the item changes (see README for the difference between the two).

The new --restore option allows restoring local data to the state as
it was before or after a sync. For this to work, "logdir" must be set
(done by default for new configurations). The format of database dumps
was changed to implement this feature: instead of in a flat file,
items are now saved as individual files in a directory. To get the
previous format back (for example, to import as one .vcf or .ics file
manually) concatenate these files.

With --remove one can remove configurations. It leaves data files and
the local databases untouched.

Various bug fixes and improvements:

* compiles and works again on Debian Etch if Boost 1.35 is installed
  from www.backports.org (without GUI, see Bugzilla #3358)

* uses XDG_CACHE_HOME (= ~/.cache) for logs and database dumps to
  avoid interfering with .desktop search in XDG_DATA_HOME; the
  directory there is automatically moved when running syncevolution
  (Bugzilla #3309)

* re-enabled certain config options (clientAuthType, maxMsgSize, maxObjSize);
  normally it shouldn't be necessary to modify those (Bugzilla #3242, #2784)

* fixed error handling of unexpected server reply in libsoup transport
  (Bugzilla #3041)

* message logging is enabled at logLevel 3 (XML translation) and 4 (also
  original XML or WBXML message)

* GTK GUI fixes since initial Moblin 2.0 beta: only start it once if
  libunique is available (Bugzilla #3154), wrap text in change sync service"
  button (Bugzilla #2064), sort sources alphabetically in UI (Bugzilla #2070)


SyncEvolution 0.8.1 -> 0.9 beta 1, 13.05.2009
---------------------------------------------
Synthesis SyncML Engine version: see src/synthesis/ChangeLog

A major new release and the first step towards further improvements:
from this release onwards, the Synthesis SyncML engine is used as the
underlying SyncML and data conversion engine. The focus of this first
beta was to reach the same level of functionality and stability as in
0.8.1. Therefore this beta does not yet bring much new features; this
will be the focus of further beta releases until finally 0.9 will be a
full replacement for 0.8.1.

This release also switches from an "all items are sent verbatim to the
SyncML server" to a "parse and convert" data handling model. The
argument for the former approach was that the SyncML server should be
the only entity in the system which does data conversion. The previous
releases already had to deviate from this approach to accommodate for
minor client/server incompatibilities and for vCard 2.1 support.

The main reason for going to full semantic conversion is vCalendar 1.0
support. Support by servers for iCalendar 2.0, the only format
supported by 0.8.1, is often still incomplete or even non-existent. By
doing the conversion on the client side, SyncEvolution is now able to
synchronize events and tasks with a wider variety of servers.

It is still true that properties not supported by a server cannot
be synchronized to other devices, so using a server with full
iCalendar 2.0 support is recommended. But in contrast to 0.8.1,
information that can only be stored locally is no longer lost when
receiving an incomplete update from the SyncML server thanks to
intelligent merging provided by the Synthesis engine. This depends on
an accurate description of the server's capabilities, which might not
be provided by all of them - still needs to be tested in more detail.

*** WARNING ***: after switching from a previous release to the
current one or vice versa, do a "syncevolution --sync
refresh-from-server" or "--sync refresh-from-client" (depending on
which side has the authoritative copy of the data) once to get client
and server into a consistent state. Not doing so can result in
applying the same changes to the server multiple times and thus
duplicates.

Changes in detail:

* vCalendar 1.0 is now supported. Because this hasn't been tested that
  much yet, events and tasks are still disabled in the Funambol default
  configuration (SF #2635973).

* Both libcurl and libsoup can be selected at compile time as HTTP(S)
  transport mechanism.

* SF #2101015: Expect: 100-continue header results in 417 Error with proxy
  Should no longer occur with the HTTP transports in this release.

* SF #1874805: Syncing with Funambol results in loosing all-day property
  This now works thanks to the Synthesis data conversion rules.

* SF #2586600: Synchronisation with mobical.net fails
  Should work now because of the different SyncML implementation (untested).

* SF #2542968: separator for categories should not be escaped
  Done correctly by the Synthesis vcard conversion.

* bug fix: Evolution notes with only a summary and no description were
  not sent correctly to the server: an empty text was sent instead of
  sending the summary

Known shortcomings in this release which will be fixed before the
final 0.9:

* Verbatim file backups of items on the SyncML server are currently
  not possible: the SyncEvolution "file" backend still exists, but
  all items are converted by the Synthesis engine and therefore must
  be in a format supported by the engine.

* HTTPS can be used with libsoup, but certificate checking is always
  disabled. Need to find a portable way to determine where the
  certificate file is on various systems.

* Log file handling is not yet unified: the traditional client.log
  contains only high-level SyncEvolution log entries. Low-level
  SyncML and engine log entries are in sysync_*.html files.

* stdout and stderr messages from system libraries are visible on the
  console. 0.8.1 used to redirect those into the client.log to hide
  this noise; this will be added again. In the meantime, ignore
  messages like "Deadlock potential - avoiding evil bug!". This is
  liborbit telling us that it is (hopefully successfully) handling
  something nasty.


SyncEvolution 0.8.1 -> 0.8.1a, 15.12.2008
-----------------------------------------
C++ client library: 7.0 plus some patches, see github
repository referenced in configure script.

A minor bug fix release, updating only necessary on Mac OS X.

* #2307976 "Trace/BPT trap - sync failure": occurs randomly in
  Mac OS X specific transport layer of the Funambol C++ client
  library. Avoided in 0.8.1a by using libcurl as transport,
  as in 0.7.


SyncEvolution 0.8 -> 0.8.1, 11.10.2008
--------------------------------------
C++ client library: 7.0 plus some patches, see github
repository referenced in configure script.

A minor bug fix release, updating not really necessary.
The binary packages for Evolution are built now so that
one package works for all compatible Evolution releases,
including the new Evolution 2.24.

* Evolution calendar: regression in 0.8: one-way sync of virtual
  birthday calendar (#2095433). "refresh-from-client" works again
  for the birthday calendar. Other modes are not supported.
  In contrast to previous releases SyncEvolution now does some
  sanity checks that the sync mode is right.
* Mac OS X: removing old logdirs failed (#2087389). Fixed.
* SyncML client library: "Expect: 100-continue" header
  resulted in 417 error with certain proxies (#2101015).
  Now this header is always disabled; it doesn't make
  much sense with SyncML anyway.
* The development of the Funambol C++ client library is now
  tracked in a git repository on github.com. Modifications
  and tags for SyncEvolution are checked in there. The
  configure script checks out the right sources from there
  automatically; can be controlled via --with-funambol-src
  parameter.
* Evolution desktop: the version of the used Evolution libraries
  is included in the "--version" output and log files.
* Cleaned up README. Kudos to Martin Wetterstedt for pointing
  out mistakes in the README and the web site.


SyncEvolution 0.7 -> 0.8, 29.08.2008
------------------------------------
C++ client library: 7.0 plus compatibility patch for Synthesis

Updating user configuration: this version introduces a new, simplified
configuration layout. Old configurations still work. They can be
converted to the new format via a new "--migrate" command line option.

*** WARNING ***: this version uses a different change tracking for Mac
OS X address book, Evolution calendars, task lists and memos.  After
switching from a previous release to the current one or vice versa, do
a "syncevolution --sync refresh-from-server" once to reset the change
tracking. Not doing so can result in applying the same changes to the
server multiple times and thus duplicates.

* New configuration file layout: following the freedesktop.org
  recommendation, new configurations are stored in
  $XDG_CONFIG_HOME/syncevolution or $HOME/.config/syncevolution if
  XDG_CONFIG_HOME is not set. The old layout under
  $HOME/.sync4j/evolution is still supported.

* New command line options: new configurations can be created by
  syncevolution itself (--configure), including setting of all
  configuration properties (--sync-property, --source-property).
  The configuration can dumped to stdout (--print-config), with or
  without comments explaining each property (--quiet). See the
  README for details.

* The "evolutionsource" source property no longer has to be configured.
  If left blank, the default client database will be synchronized.

* Selecting which kind of data is to be synchronized under a specific
  source name is a lot easier now and the same on all supported
  platforms: the SyncEvolution backends can be selected via aliases
  (e.g. "contacts") and the format is specified via an optional
  MIME type (e.g. "contacts:text/x-vcard"). In the unlikely situation
  that multiple backends are active which can synchronize the same
  kind of data, then the right one can be selected by the unique
  name of the backend (e.g. "Evolution Address Book").

* New configurations automatically get a random client ID string.
  Setting it manually is still possible, but no longer necessary.
  Disabling unavailable data sources is also done automatically.

  SyncEvolution checks that the backend is available and there is
  at least one database (the first one will be synchronized unless
  explicitly changed). If these checks fail and the sync source was
  explicitly requested by the user by listing it after the server
  name, then an error is printed and no configuration is written.
  If the user wants the default setup, then the source is silently
  disabled.

* All passwords can be read from stdin at runtime or an environment
  variable (see "--sync-property password=?" or README for details).
  Both avoids the less secure storing of plain text passwords in the
  configuration files (SF #1832458).

* Detached recurrences: meeting series where some occurrences were
  modified are now supported. Previously only the main event was
  synchronized. All exceptions got lost when copying back from the
  server. Requires a SyncML server which supports this. ScheduleWorld
  was extended to do that.

* Fixed segfaults caused by logging certain data. The reason was an 
  API change in the client library's logging calls which the older
  SyncEvolution code hadn't been adapted to. Did not normally occur,
  but might have been the reason for SF #1830149 (unconfirmed).

* Time zone support: the time zones of incoming events are mapped
  to native time zone definitions whenever possible. Currently
  this works if the TZID follows the Olson naming scheme with a
  location at the end. Matching the time zone has the advantage of
  being able to update the time zone definition without having to
  recreate the event. If matching fails and the VTIMEZONE definition
  differs from one already imported earlier, then SyncEvolution works
  arounds limitation in Evolution by renaming the time zone.
  Previously the new event used the old and most likely out-dated
  time zone definition.

  ***WARNING***: Evolution itself does not do either of these steps
  itself yet, thus importing meeting invitations via Evolution still
  fails in some cases. The code implementing the time zone handling
  described above was written with inclusion into Evolution itself in
  mind; a discussion with the Evolution developers about that is in
  progress.

* On Maemo/Nokia Internet Tablets, calendar synchronization now
  works because the new calendar change tracking no longer depends
  on some of the backend calls which used to fail (SF #1734977).

* Added SSL configuration options: certificate checking can be
  relaxed or disabled completely (SF #1852647).

* Added a new file backend: stores each SyncML item as a separate file
  in a directory.  The directory has to be specified via the database
  name, using [file://]<path> as format. The file:// prefix is
  optional, but the directory is only created if it is used.

  Change tracking is done via the file systems modification time
  stamp: editing a file treats it as modified and then sends it to the
  server in the next sync. Removing and adding files also works.

  The local unique identifier for each item is its name in the
  directory. New files are created using a running count which
  initialized based on the initial content of the directory to
  "highest existing number + 1" and incremented to avoid collisions.
 
  Although this sync source itself does not care about the content of
  each item/file, the server needs to know what each item sent to it
  contains and what items the source is able to receive. Therefore
  the "type" property for this source must contain a data format
  specified, including a version for it. Here are some examples:
  - type=file:text/vcard:3.0
  - type=file:text/plain:1.0

* Code restructuring: it is now possible to add new backends and thus
  write SyncML clients for other kinds of data without touching any
  line of code in SyncEvolution itself. All the required interfaces
  are documented inside SyncEvolution itself. A HTML documentation can
  be built via the new "make doc" target (requires Doxygen and dot).

  The SyncEvolution framework itself never depended on GNOME or
  Evolution, only the Evolution data sources did. If you want
  support for other ways of storing your data, consider writing
  a new data source - it is really easy. See EvolutionSyncSource
  or TrackingSyncSource for details.

* Messages are printed to the screen immediately. More readable
  log file format.

* Maemo: the useless ''list: unable to access calendars:
  failure' error message is avoided. It was triggered by not having
  memo support in Evolution Data Server. Cleaned up the code so that
  it properly distinguishes between 'calendar', 'memo list' and
  'task list'.

* added server template for MemoToo; note that the server has not been
  tested

* added synchronization of Evolution memo summary

  Most devices only synchronize plain text and do not have a
  separate summary field. Such an extra summary field was added to
  Evolution after memo support was initially implemented in
  SyncEvolution, therefore SyncEvolution did not transmit that
  field.
  
  Added transmitting the summary by inserting it as first line of
  the plain text blob *if* it is not already identical with the
  first line. When receiving a memo, the summary is set from the
  first line *without* removing the first line because the first
  line might have been used as a normal part of the memo.

* Various other minor changes, fixes and lots of code cleanups.

* license cleanup: SyncEvolution is GPL v2 or later


SyncEvolution 0.8 beta 2 -> 0.8 final, 29.08.2008
-------------------------------------------------
C++ client library: 7.0 plus compatibility patch for Synthesis

* license cleanup: SyncEvolution is GPL v2 or later


SyncEvolution 0.8 beta 2 -> 0.8 beta 3, 17.08.2008
--------------------------------------------------
C++ client library: 7.0 plus compatibility patch for Synthesis

* Another revision of updating events in Evolution calendars:
  the method introduced in 0.8 beta 1 for dealing with
  detached recurrences did not work with the Evolution Exchange
  Connector. Now both Exchange and local calendars pass the unit
  tests again.

* minor code cleanup (testing, writing additional backends)


SyncEvolution 0.8 beta 1 -> 0,8 beta 2, 03.08.2008
--------------------------------------------------
C++ client library: 7.0 plus compatibility patch for Synthesis

* To prevent accidental sync runs when a configuration change
  was intented, a new --run switch must be used when configuration
  properties are given on the command line. When neither --run
  nor --configure are specified, SyncEvolution prints an
  error and refuses to do anything.

* Improved documentation for command line, in particular the synopsis.

* Added a new file backend: stores each SyncML item as a separate file
  in a directory.  The directory has to be specified via the database
  name, using [file://]<path> as format. The file:// prefix is
  optional, but the directory is only created if it is used.

  Change tracking is done via the file systems modification time
  stamp: editing a file treats it as modified and then sends it to the
  server in the next sync. Removing and adding files also works.

  The local unique identifier for each item is its name in the
  directory. New files are created using a running count which
  initialized based on the initial content of the directory to
  "highest existing number + 1" and incremented to avoid collisions.
 
  Although this sync source itself does not care about the content of
  each item/file, the server needs to know what each item sent to it
  contains and what items the source is able to receive. Therefore
  the "type" property for this source must contain a data format
  specified, including a version for it. Here are some examples:
  - type=file:text/vcard:3.0
  - type=file:text/plain:1.0

* Code restructuring: it is now possible to add new backends and thus
  write SyncML clients for other kinds of data without touching any
  line of code in SyncEvolution itself. All the required interfaces
  are documented inside SyncEvolution itself. A HTML documentation can
  be built via the new "make doc" target (requires Doxygen and dot).


SyncEvolution 0.8 alpha 1 -> 0.8 beta 1, 12.07.2008
---------------------------------------------------
C++ client library: the frozen 7.0 code, but before the release

* Added support for detached recurrences (aka modified instances of
  a recurring event). Requires a SyncML server which supports this.
  ScheduleWorld was extended to do that.

* Fixed segfaults caused by logging certain data. The reason was an 
  API change in the client library's logging calls which the older
  SyncEvolution code hadn't been adapted to. Did not normally occur,
  but might have been the reason for SF #1830149 (unconfirmed).

* when creating a config for the first time, only enable sync sources
  which can be synchronized (SF #1991286)

  The check for that was completely missing. Now SyncEvolution
  checks that the backend is available and there is at least one
  database (the first one will be synchronized unless explicitly
  changed). If these checks fail and the sync source was explicitly
  requested by the user by listing it after the server name, then
  an error is printed and no configuration is written. If the user
  wants the default setup, then the source is silently disabled.

* Fixed incorrect properties in some of the new server templates
  (ScheduleWorld syncURL + calender URI, Funambol syncURL, ScheduleWorld
   addressbook type)

* Device IDs must start with the "sc-pim-" prefix, otherwise myFUNAMBOL
  may treat different devices as the single phone that myFUNAMBOL
  supports, leading to unwanted slow syncs.

* Maemo package is build again so that backends are loaded dynamically:
  installing Dates application is as it was with the 0.7 release
  (SF #1993109). The useless ''list: unable to access calendars:
  failure' error message is avoided. It was triggered by not having
  memo support in Evolution Data Server. Cleaned up the code so that
  it properly distinguishes between 'calendar', 'memo list' and
  'task list'.

* added server template for MemoToo; note that the server has not been
  tested

* added synchronization of Evolution memo summary

  Most devices only synchronize plain text and do not have a
  separate summary field. Such an extra summary field was added to
  Evolution after memo support was initially implemented in
  SyncEvolution, therefore SyncEvolution did not transmit that
  field.
  
  Added transmitting the summary by inserting it as first line of
  the plain text blob *if* it is not already identical with the
  first line. When receiving a memo, the summary is set from the
  first line *without* removing the first line because the first
  line might have been used as a normal part of the memo.

* removed --properties option: it wasn't implemented yet and won't be in 0.8

* fixed regression in alpha 1: setting sync mode during status query
  or sync affected *all* sources, even the disabled ones. Now it only
  affects the enabled ones, as intended. To enable disabled sync sources,
  list them after the server name.

*** WARNING ***: this version uses a different change tracking for
for Mac OS X AddressBook. After switching from a previous release to the current
one or vice versa, do a "syncevolution --sync refresh-from-server"
once to reset the change tracking. Not doing so can result in applying
the same changes to the server multiple times and thus duplicates.

A similar change was necessary in 0.8 alpha 1 for Evolution calendar,
tasks, and memos. When switching from a version >= 0.8 alpha 1 to an
older version or vice versa also refresh the local databases.

0.8 alpha 1 did not create correct configurations. When you want to continue
using such a configuration, make sure that in addition to the obviously
wrong syncURLs also the less obvious ScheduleWorld config mistakes are fixed:
* calendar: uri=cal2
* addressbook: type=addressbook:text/vcard
* deviceId must start with "sc-pim-" if you synchronize with myFUNAMBOL,
  otherwise there may be unwanted slow syncs when multiple devices with
  a different deviceId connect. Note that changing the deviceId causes
  a slow sync, so you should get client and server in sync before changing
  the value, change it, then do a "--sync refresh-from-server".


SyncEvolution 0.7 -> 0.8 alpha 1, 19.04.2008
--------------------------------------------
C++ client library: a snapshot of the development version

Updating user configuration: this version introduces a new, simplified
configuration layout. Old configurations still work. They can be
converted to the new format via a new "--migrate" command line option.

*** WARNING ***: this version uses a different change tracking for
Evolution calendars, task lists and memos. After switching from a previous
release to the current one or vice versa, do a "syncevolution --sync
refresh-from-server" once to reset the change tracking. Not doing so
can result in applying the same changes to the server multiple times
and thus duplicates.

* New configuration file layout: following the freedesktop.org
  recommendation, new configurations are stored in
  $XDG_CONFIG_HOME/syncevolution or $HOME/.config/syncevolution if
  XDG_CONFIG_HOME is not set. The old layout under
  $HOME/.sync4j/evolution is still supported.

* New command line options: new configurations can be created by
  syncevolution itself (--configure), including setting of all
  configuration properties (--sync-property, --source-property).
  The configuration can dumped to stdout (--print-config), with or
  without comments explaining each property (--quiet). See the
  README for details.

* The "evolutionsource" source property no longer has to be configured.
  If left blank, the default client database will be synchronized.

* Selecting which kind of data is to be synchronized under a specific
  source name is a lot easier now and the same on all supported
  platforms: the SyncEvolution backends can be selected via aliases
  (e.g. "contacts") and the format is specified via an optional
  MIME type (e.g. "contacts:text/x-vcard"). In the unlikely situation
  that multiple backends are active which can synchronize the same
  kind of data, then the right one can be selected by the unique
  name of the backend (e.g. "Evolution Address Book").

* New configurations automatically get a random client ID string.
  Setting it manually is still possible, but no longer necessary.

* All passwords can be read from stdin at runtime or an environment
  variable (see "--sync-property password=?" or README for details).
  Both avoids the less secure storing of plain text passwords in the
  configuration files (SF #1832458).

* Detached recurrences: meeting series where some occurrences were
  modified are now supported. Previously only the main event was
  synchronized. All exceptions got lost when copying back from the
  server. ***WARNING***: such events are accepted by ScheduleWorld,
  but not propagated to other clients. Under investigation.

* Time zone support: the time zones of incoming events are mapped
  to native time zone definitions whenever possible. Currently
  this works if the TZID follows the Olson naming scheme with a
  location at the end. Matching the time zone has the advantage of
  being able to update the time zone definition without having to
  recreate the event. If matching fails and the VTIMEZONE definition
  differs from one already imported earlier, then SyncEvolution works
  arounds limitation in Evolution by renaming the time zone.
  Previously the new event used the old and most likely out-dated
  time zone definition.

  ***WARNING***: Evolution itself does not do either of these steps
  itself yet, thus importing meeting invitations via Evolution still
  fails in some cases. The code implementing the time zone handling
  described above was written with inclusion into Evolution itself in
  mind; a discussion with the Evolution developers about that is in
  progress.

* On Maemo/Nokia Internet Tablets, calendar synchronization now
  works because the new calendar change tracking no longer depends
  on some of the backend calls which used to fail (SF #1734977).

* Added SSL configuration options: certificate checking can be
  relaxed or disabled completely (SF #1852647).

* Adding support for new local data sources is easier now. The
  SyncEvolution frame work itself never depended on GNOME or
  Evolution, only the Evolution data sources did. If you want
  support for other ways of storing your data, consider writing
  a new data source - it is really easy. See EvolutionSyncSource
  or TrackingSyncSource for details.

* Messages are printed to the screen immediately. More readable
  log file format.

 * Various other minor changes and fixes.


SyncEvolution 0.6 -> 0.7, 17.12.2007
------------------------------------
C++ client library: r_6_5_3_1

Updating user configuration: no relevant changes in this release. For those
who haven't done so already, enabling large object support is recommended
(see syncml/config.txt sample configs).

* added port for iPhone and Mac OS X Address Book

* fixed Nokia packaging problem which prevented installation
  via the package manager unless it was in "red pill" mode
  (SF #1781652)

* sync with eGroupware - lost or messed up telephones: SyncEvolution
  incorrectly added TYPE=OTHER to phone numbers sent with e.g.
  CELL instead of TYPE=CELL (SF #1796086). Another patch was
  required for eGroupware itself to correctly map phone numbers
  as sent by SyncEvolution, see Compatibility web page.

* added .deb packages

* adapted calendar event insert/update to Evolution 2.12: the UID needs to be
  restored, otherwise the Evolution backend crashes (GNOME issue #488881)

* new feature: if the previous log directory is still available,
  then local changes made since last sync can be queried
  before starting a sync (new option --status) and will be
  printed directly before a sync. Setting the "logdir" option
  will automatically keep the most recent logs and database
  dumps around.

* added command line options:
  --sync|-s <mode>
    Temporarily synchronize the active sources in that mode. Useful
    for a 'refresh-from-server' or 'refresh-from-client' sync which
    clears all data at one end and copies all items from the other.

  --status|-t
    The changes made to local data since the last synchronization are
    shown without starting a new one. This can be used to see in advance
    whether the local data needs to be synchronized with the server.

  --quiet|-q
    Suppresses most of the normal output during a synchronization. The
    log file still contains all the information.

  --help|-h
    Prints usage information.

  --version
    Prints the SyncEvolution version.

* default configurations now reference the normal Evolution databases
  ("Personal") thus requiring less changes to use. The account information
  is now clearly marked as placeholder which needs to be entered.

* bugfix: vCard 3.0 with mixed case were not converted properly to vCard 2.1
  by SyncEvolution (must convert to upper case because vCard 2.1 only allows
  that), leading to problems with mapping phone numbers in the Funambol server.
  Diagnosed and reported by Paul McDermott, thanks a lot!

* support receiving plain text notes with \n and \r\n line breaks;
  always send with \r\n

* added explicit error message when syncevolution is invoked
  with incorrect names in the list of sources to synchronize:
  previously it silently ignored unknown names

* improved output: less verbose ("extracting" items is now
  logged at debug level and thus not normally shown) and more
  informative printing of changes (table summarizes number of
  changes on client and server, heading for comparison changed
  to make it clear that it shows changes on the client)

* SyncCap is not generated unless syncModes are configured: added
  a comment to example config (SF #1764123)

* improved error handling: catch errors during post-processing and
  continue


SyncEvolution 0.7-pre2 -> 0.7, 17.12.2007
-----------------------------------------
C++ client library: r_6_5_3_1

* bugfix: vCard 3.0 with mixed case were not converted properly to vCard 2.1
  by SyncEvolution (must convert to upper case because vCard 2.1 only allows
  that), leading to problems with mapping phone numbers in the Funambol server.
  Diagnosed and reported by Paul McDermott, thanks a lot!

* support receiving plain text notes with \n and \r\n line breaks;
  always send with \r\n

* added explicit error message when syncevolution is invoked
  with incorrect names in the list of sources to synchronize:
  previously it silently ignored unknown names

* added stack dumping in case of premature abort;
  removed workaround for lost connection to Evolution Dataserver
  again because the workaround itself caused random segfaults inside
  glib


SyncEvolution 0.7-pre1 -> 0.7-pre2, 08.11.2007
----------------------------------------------
C++ client library: branch b_v65

Updating user configuration: no relevant changes in this release. For those
who haven't done so already, enabling large object support is recommended
(see syncml/config.txt sample configs). It is required for myFUNAMBOL to
synchronize very large address books and some users have reported segfaults
unless this option was enabled.

* iPhone bug fix: syncing contacts with photos was unreliable (export) and
  crashed (import) because the API had not been called correctly

* iPhone + ScheduleWorld: when configured to use vcard3 (recommended!) then
  contacts are exchanged as vCard 3.0

* iPhone + ScheduleWorld bugfix: importing vCard 3.0 did not correctly
  classify the phone numbers. A sync with the new "--sync refresh-from-server"
  option will fix this, assuming that the server has the correct data.

* Evolution: detect a crashed backend and abort SyncEvolution instead of
  hanging forever.

* adapted calendar event insert/update to Evolution 2.12: the UID needs to be
  restored, otherwise the Evolution backend crashes (GNOME issue #488881)

* new feature: if the previous log directory is still available,
  then local changes made since last sync can be queried
  before starting a sync (new option --status) and will be
  printed directly before a sync. Setting the "logdir" option
  will automatically keep the most recent logs and database
  dumps around.

* added command line options:
  --sync|-s <mode>
    Temporarily synchronize the active sources in that mode. Useful
    for a 'refresh-from-server' or 'refresh-from-client' sync which
    clears all data at one end and copies all items from the other.

  --status|-t
    The changes made to local data since the last synchronization are
    shown without starting a new one. This can be used to see in advance
    whether the local data needs to be synchronized with the server.

  --quiet|-q
    Suppresses most of the normal output during a synchronization. The
    log file still contains all the information.

  --help|-h
    Prints usage information.

  --version
    Prints the SyncEvolution version.

* default configurations now reference the normal Evolution databases
  ("Personal") thus requiring less changes to use. The account information
  is now clearly marked as placeholder which needs to be entered.


SyncEvolution 0.6 -> 0.7-pre1, 17.10.2007
-----------------------------------------
* C++ client library: tag "sdkcpp_6_0_9_1" (same as before)
* added support for Mac OS X/iPhone address book
* fixed Nokia packaging problem which prevented installation
  via the package manager unless it was in "red pill" mode
* improved output: less verbose ("extracting" items is now
  logged at debug level and thus not normally shown) and more
  informative printing of changes (table summarizes number of
  changes on client and server, heading for comparison changed
  to make it clear that it shows changes on the client)
* example configs were in share/share directory (SF #1767329)
* Nokia 770/800: uninstallable package fixed by setting category
  (SF #1781652)
* sync with eGroupware - lost or messed up telephones: SyncEvolution
  incorrectly added TYPE=OTHER to phone numbers sent with e.g.
  CELL instead of TYPE=CELL (SF #1796086). Another patch was
  required for eGroupware itself to correctly map phone numbers
  as sent by SyncEvolution, see Compatibility web page.
* SyncCap is not generated unless syncModes are configured: added
  a comment to example config (SF #1764123)
* improved error handling: catch errors during post-processing and
  continue


SyncEvolution 0.5 -> 0.6, 13.07.2007
------------------------------------
* C++ client library: tag "sdkcpp_6_0_9_1"
* added support for synchronizing Evolution notes (aka memos) as
  plain text where the first line serves as summary; this is the
  format understood by ScheduleWorld
* added support for synchronizing Evolution notes (aka memos) as
  iCal 2.0 journal; not currently supported by any server and 
  untested
* revamped example configs and documentation: only one set of
  config files for each server is provided, because this is more
  likely to be needed by users
* example configs are now installed in share/doc/syncevolution,
  enabled message limit and large object support in them
* added support for Nokia 770/800 (aka Maemo):
  built with loadable modules so that it works with whatever
  backends are installed, improved log handling to accomodate
  for limited space on filesystem (see below), some workarounds
* added workaround for Nokia 770:
  contacts are not really deleted unless the EDS-Sync with
  instant messaging servers is activated; now SyncEvolution
  will delete contacts marked as deleted by the GUI before
  a sync if it finds any.
  WARNING: if you use EDS-Sync and SyncEvolution, then give
  EDS-Sync enough time after going online to finish its own
  synchronization of modified/deleted contacts before starting
  SyncEvolution.
* improved log handling: writing log and database dumps can be
  disabled with "logdir=none", verbosity of log is controlled by
  "loglevel", better handling of errors during initial database
  access
* added workaround for Evolution bug #455274:
  the separator for multiple categories in events and tasks
  is not generated and interpreted according to iCalendar 2.0
  by Evolution; as a consequence of that items sent to the server
  had all categories merged into one and items imported into
  Evolution only used one of the catories
  http://bugzilla.gnome.org/show_bug.cgi?id=455274
* fixed off-by-one counting of months in backup directory names
* fixed error handling: a failed source was not forced into a slow
  sync as required; one failed source prevented saving configs of
  not-failed ones and thus forced those into an unnecessary slow
  sync
* uses the Funambol C++ testing framework (which is based on the
  previous SyncEvolution testing); now creates its configs
  and (when using CLIENT_TEST_EVOLUTION_PREFIX=file://<path>)
  also the Evolution databases automatically
* implemented synccompare as pure Perl script using Algorithm::Diff
  instead of external diff tool
* synccompare did not figure out width of shell window as it should have
* better error handling if creating the before/after database dumps
  fails (SF #1685637)
* workaround for Funambol 3.0 trailing = parser bug

UPGRADING

Old config files from 0.5 or older continue to work, but it is recommended
to set the following options to enable message size limits:
  maxMsgSize = 8192
  maxObjSize = 500000
  loSupport = 1


SyncEvolution 0.6pre2 -> 0.6, 13.07.2007
----------------------------------------
* improved README/HACKING documents
* fixed the new example configs: use event/task for Funambol 6.0,
  name was wrong
* added workaround for Evolution bug #455274:
  the separator for multiple categories in events and tasks
  is not generated and interpreted according to iCalendar 2.0
  by Evolution; as a consequence of that items sent to the server
  had all categories merged into one and items imported into
  Evolution only used one of the catories
  http://bugzilla.gnome.org/show_bug.cgi?id=455274
* added workaround for Nokia 770:
  contacts are not really deleted unless the EDS-Sync with
  instant messaging servers is activated; now SyncEvolution
  will delete contacts marked as deleted by the GUI before
  a sync if it finds any.
  WARNING: if you use EDS-Sync and SyncEvolution, then give
  EDS-Sync enough time after going online to finish its own
  synchronization of modified/deleted contacts before starting
  SyncEvolution.


SyncEvolution 0.6pre1 -> 0.6pre2, 23.04.2006
--------------------------------------------
* C++ client library: tag "sdkcpp_6_0_7" + revision 1.7 of
  build/autotools/test/Makefile.am
* added support for synchronizing Evolution notes (aka memos) as
  plain text where the first line serves as summary; this is the
  format understood by ScheduleWorld, not the iCal 2.0 format
  added in 0.6pre1
* improved log handling: writing log and database dumps can be
  disabled with "logdir=none", verbosity of log is controled by
  "loglevel", better handling of errors during initial database
  access
* fixed off-by-one counting of months in backup directory names
* fixed error handling: a failed source was not forced into a slow
  sync as required; one failed source prevented saving configs of
  not-failed ones and thus forced those into an unnecessary slow
  sync
* revamped example configs: only one set of config files for each
  server is provided, because this is more likely to be needed
  by users
* uses the Funambol C++ testing framework (which is based on the
  previous SyncEvolution testing); now creates its configs
  and (when using CLIENT_TEST_EVOLUTION_PREFIX=file://<path>)
  also the Evolution databases automatically


SyncEvolution 0.5 -> 0.6pre1, 26.03.2006
----------------------------------------
* C++ client library: CVS snapshot from 26.03.2006
* added support for synchronizing Evolution notes (aka memos) as
  iCal 2.0 journal
* added --enable-static-cxa = linking C++ runtime statically:
  binaries produced for 0.6 will have less external
  dependencies than the 0.5 binaries
* added hacks for Maemo/Nokia 770, including a build
  mode with dynamically loadable modules (--enable-shared, --enable-maemo,
  --with-patched-dbus)
* implemented synccompare as pure Perl script using Algorithm::Diff
  instead of external diff tool
* synccompare did not figure out width of shell window as it should have
* better error handling if creating the before/after database dumps
  fails (SF #1685637)
* example configs are now installed in share/doc/syncevolution,
  enabled message limit and large object support in them
* workaround for Funambol 3.0 trailing = parser bug

UPGRADING

Old config files continue to work, but it is recommended
to set the following options to enable message size limits:
  maxMsgSize = 8192
  maxObjSize = 500000
  loSupport = 1



SyncEvolution 0.4 -> 0.5, 12.11.2006
------------------------------------
* C++ client library revision "syncevolution-0-5":
  - added support for sending changes in smaller chunks
    ("Large Object Support"): disabled by default, see updated
    example configuration
  - time is printed with GMT offset so that a server admin in
    a different timezone can always figure out how a client log
    relates to events on the server
  - special item keys as they might be stored in some calendars after
    importing non-Evolution events are now properly supported
* bug fix: in 0.4 it was necessary to manually configure the verDTD
  or the Funambol 3.0a server would choke on the invalid SyncML during
  the second synchronization with SyncEvolution; now this option is set
  automatically
* added support and testing of transmitting just the changes
  from client to server or vice versa; see "one-way-from-server/client"
  in example configuration
* fixed/updated comments in the example configuration
* improved automated testing and fixed the problem that CPPUnit was not
  found unless it was part of the system
* Now works on Maemo/Nokia 770: minor changes were necessary so that
  the system address book can now be selected under the name "<<system>>.
  Copying 300 contacts into the Nokia 770 went fine, but any further
  attempt to synchronize suffered from timeouts inside the embedded
  Evolution Data Server.


SyncEvolution 0.3 -> 0.4, 11.09.2006 
------------------------------------
* C++ client library revision "syncevolution-0-4":
  - added support for device information, required by some servers
  - fixed incompatibilities with non-Funambol servers
  - the user agent string can now be modified in the
    spds/syncml/config.txt, but it is recommended to not set
    it explicitly. Then SyncEvolution will automatically insert
    its current version.
  - #305795: for tasks the "text/x-todo" type from the configuration
    was sent to servers instead of the correct "text/calendar"
    provided by SyncEvolution itself
  - sync modes "refresh-client/server" can now be specified as
    "refresh-from-client/server" in the config
* updated default syncml/config.txt:
  - firstTimeSyncMode has never been implemented in the library,
    removed its documentation,
  - added documentation for userAgent
  - use "refresh-from-client/server"
* SF issue 1511951: support copying changes back from EGroupware
  server by not expecting the UID of calendar items to be unmodified
* fixed a bug where after a refresh-from-client sync changes would
  be sent to the server again during a two-way sync although the
  server already had them
* implemented authentication for Evolution databases
* synccompare was removing too many parts of vCards with 
  single-value ORG properties
* improved error reporting when selected server is not configured
* changed vCard parser to make it compatible with servers
  which send a verbatim semicolon as part of properties where
  the semicolon has no special meaning
* If minor errors occur like not being able to insert an
  item at the client or server side, then it is reported in the
  log and output, but the next synchronization will be a normal
  synchronization, not a forced slow one as in previous versions.
  The old approach ensured that the problem was noticed and fixed,
  but required user assistance. With the new approach synchronization
  continues to work, although without fixing the root cause of
  the problem.
* Workaround for bug in Evolution 2.0.6 (and perhaps other versions):
  for calendars and task lists not all deleted items were reported
  at once thus a single synchronization would only tell the server
  about a subset of the changes. Repeating the synchronization would
  eventually be told of all changes, so now this repetition is built
  into the code which queries for changes and a single synchronization
  is sufficient as it should be.


SyncEvolution 0.4 pre2 -> 0.4, 11.09.2006 
-----------------------------------------
* adapted to C++ client library from CVS head, tagged as syncevolution-0-4:
  devinfo.patch patch was merged with several changes to the API
* SF issue 1511951: support copying changes back from EGroupware
  server by not expecting the UID of calendar items to be unmodified


SyncEvolution 0.4 pre1 -> pre2, 21.08.2006
------------------------------------------
* C++ client library revision "syncevolution-0-4-pre2":
  most patches were merged into CVS head, but .patches/devinfo.patch
  still needs to be applied manually when checking out from the
  Funambol CVS instead of using the bundled version
* fixed a bug where after a refresh-from-client sync changes would
  be sent to the server again during a two-way sync although the
  server already had them
* implemented authentication for Evolution databases
* synccompare was removing too many parts of vCards with 
  single-value ORG properties
* improved error reporting when selected server is not configured
* use 7-bit quoted-printable encoding with explicit UTF-8 charset for
  vCard 2.1 to avoid any potential confusion about the content; not
  really necessary because SyncML specifies 8-bit UTF-8 as the default
* fix for 0.4 pre 1: sending CHARSET is not allowed (and not
  needed) for vCard 3.0, so it was removed again (did not harm
  either)
* fix for 0.4 pre 1: sending vCard 2.1 to Synthesis server did
  not work because the new device info always mentioned 3.0 as
  the preferred format - now the preferred format matches the one
  that was configured and that thus will be used.


SyncEvolution 0.3 -> 0.4 pre 1, 2006-08-06
------------------------------------------
* C++ client library revision "funambol30ga" plus the patches
  stored in its ".patches" directory:
  - the user agent string can now be modified in the
    spds/syncml/config.txt, but it is recommended to not set
    it explicitly. Then SyncEvolution will automatically insert
    its current version.
  - now compatible with additional servers (fixed some SyncML
    protocol issues, added support for sending device
    information)
  - revised API of the client library
  - #305795: for tasks the "text/x-todo" type from the configuration
    was sent to servers instead of the correct "text/calendar"
    provided by SyncEvolution itself
  - sync modes "refresh-client/server" can now be specified as
    "refresh-from-client/server" in the config
* updated default syncml/config.txt:
  - firstTimeSyncMode has never been implemented in the library,
    removed its documentation,
  - added documentation for userAgent
  - use "refresh-from-client/server"
* changed vCard parser to make it compatible with servers
  which send a verbatim semicolon as part of properties where
  the semicolon has no special meaning
* If minor errors occur like not being able to insert an
  item at the client or server side, then it is reported in the
  log and output, but the next synchronization will be a normal
  synchronization, not a forced slow one as in previous versions.
  The old approach ensured that the problem was noticed and fixed,
  but required user assistance. With the new approach synchronization
  continues to work, although without fixing the root cause of
  the problem.
* Workaround for bug in Evolution 2.0.6 (and perhaps other versions):
  for calendars and task lists not all deleted items were reported
  at once thus a single synchronization would only tell the server
  about a subset of the changes. Repeating the synchronization would
  eventually be told of all changes, so now this repetition is built
  into the code which queries for changes and a single synchronization
  is sufficient as it should be.
* Made it compile on Maemo 2.0, the Nokia 770 build environment, by
  adding "--disable-ecal". Not tested yet, though.


SyncEvolution 0.3, 2006-06-27
-----------------------------

* added syncing of calendars and tasks as iCalendar 2.0
* added syncing of contacts as vCard 3.0
* tested extensively with sync.scheduleworld.com and
  added an example configuration for it
* uses C++ client library revision "wmplugin_3_0_20"
  which contains several bug fixes, among them proper
  support for special characters and memory handling
  fixes
* much nicer listing of changes made during a sync,
  handled by the improved "synccompare" utility script
  (formerly known as "normalize_vcard")
* improved automated testing


SyncEvolution 0.2, 2006-03-19
-----------------------------

* added automatic backup mechanism and log storage,
  see "Automatic Backups and Logging".
* output no longer is the original log data, but rather
  a human-readable report of errors and synchronization
  results.
* "normalize_vcard" can now also compare two .vcf files
  directly.
* improved unit tests to catch more errors
* hide certain differences in vcards coming back from
  the server: duplication of extended vcard properties,
  missing TYPE=OTHER
* fixed client library problems:
  see http://forge.objectweb.org/tracker/?group_id=96&atid=100096
      #304792, #304829
* added some more problems to the "Known Problems" section


SyncEvolution 0.1, 2006-03-13
-----------------------------

* initial release