dnl -*- mode: Autoconf; -*-
dnl Invoke autogen.sh to produce a configure script.
# The STABLE_VERSION is used when building
# Debian packages. For prereleases (beta, alpha),
# set it to something like "0.9.2+" and the AC_INIT
# VERSION to 1.0beta1 to produce 0.9.2+1.0beta1.
#
# Starting with the 1.1 release cycle, the rpm-style
# .99 pseudo-version number is used to mark a pre-release.
AC_INIT([syncevolution], [m4_esyscmd([build/gen-git-version.sh 1.1.99.6])])
# STABLE_VERSION=1.0.1+
AC_SUBST(STABLE_VERSION)
# Generate some files.
SE_GENERATE_AM_FILES
SE_GENERATE_LINGUAS
# Default value for --enable/disable-release-mode.
# Determined by gen-autotools.sh based on versioning.
# Official, stable releases enable it, pre-releases
# disable it.
#
SE_CHECK_FOR_STABLE_RELEASE
# Minimum version of libsynthesis as defined in its
# configure script and thus .pc files:
define([SYNTHESIS_MIN_VERSION], [3.4.0.16.1])
# Line above is patched by gen-autotools.sh. Handle
# both "yes" and "no".
m4_define([STABLE_RELEASE_HELP], m4_if(STABLE_RELEASE,[yes],[--disable-release-mode],[--enable-release-mode]))
AC_ARG_ENABLE(release-mode,
AS_HELP_STRING([STABLE_RELEASE_HELP],
[Controls whether resulting binary is for end-users or
testers/developers. For example, stable releases automatically
migrate on-disk files without asking, whereas other releases
ask before making downgrades impossible (or difficult).
Default in this source code is
"stable release: STABLE_RELEASE"]),
enable_release_mode="$enableval", enable_release_mode="STABLE_RELEASE")
if test "$enable_release_mode" = "yes"; then
AC_DEFINE(SYNCEVOLUTION_STABLE_RELEASE, 1, [binary is meant for end-users])
fi
AM_INIT_AUTOMAKE([1.11.1 tar-ustar silent-rules subdir-objects -Wno-portability])
AM_PROG_CC_C_O
AM_MAINTAINER_MODE([enable]) # needed for nightly builds where reconfiguration fails under certain chroots
AC_CONFIG_MACRO_DIR([m4])
define([SYNTHESISSRC_REPO], [])
dnl Specify git revisions/branches without prefix, i.e., without 'origin'.
dnl We'll sort that out below.
define([SYNTHESISSRC_REVISION], [syncevolution-0.9])
AC_CONFIG_HEADERS(config.h)
LT_INIT([dlopen])
dnl check for programs.
AC_PROG_CXX
AC_PROG_MAKE_SET
DK_ARG_ENABLE_WARNINGS([SYNCEVO_WFLAGS],
[-Wall],
[-pedantic -Wall -Wextra],
[G GDK GDK_PIXBUF CAIRO PANGO GTK])
dnl default device type (see AC_DEFINE below)
DEVICE_TYPE=workstation
AC_ARG_WITH(synthesis-src,
AS_HELP_STRING([--with-synthesis-src=],
[Specifies location of the Synthesis root directory.
Use this when the Synthesis library is to
be compiled as part of the SyncEvolution compilation. In release
versions of SyncEvolution, a copy of the Synthesis code is bundled
under 'src/synthesis' and compiled unless something else is
specified. --with-synthesis-src can be given a path to sources
checked out already, a Subversion repository URL or a git repository
URL. When given a repository URL, then the configure script
will checkout the sources into 'src/synthesis-workdir' or
update that working copy if the directory already exists.
Default: bundled source in src/synthesis (in released SyncEvolution sources),
SYNTHESISSRC_REPO otherwise.]),
[SYNTHESISSRC="$withval"
test "$SYNTHESISSRC" != "yes" || AC_MSG_ERROR([--with-synthesis-src requires a parameter (base directory, svn URL or git URL)])],
[SYNTHESISSRC="$SYNTHESISSRC_DEF"; REVISION="SYNTHESISSRC_REVISION"])
AC_ARG_WITH(syncml-engines,
AS_HELP_STRING([--with-syncml-engines=client|server|both],
[Determines which kind of support for SyncML is compiled and linked into SyncEvolution. Default is both. Currently has no effect.]),
[SYNCML_ENGINES="$withval"], SYNCML_ENGINES=both)
case $SYNCML_ENGINES in both|client) AC_DEFINE(ENABLE_SYNCML_CLIENT, 1, [SyncML client support available]);; esac
case $SYNCML_ENGINES in both|server) AC_DEFINE(ENABLE_SYNCML_SERVER, 1, [SyncML server support available]);; esac
case $SYNCML_ENGINES in both|server|client) true;; *) AC_MSG_ERROR([Invalid value for --with-syncml-engines: $SYNCML_ENGINES]);; esac
AC_ARG_WITH(synthesis-username,
AS_HELP_STRING([--with-synthesis-username=],
[username to use when checking out --with-synthesis-src sources from Subversion, default 'guest']),
[USERNAME="$withval"], [USERNAME="guest"])
AC_ARG_WITH(synthesis-revision,
AS_HELP_STRING([--with-synthesis-revision=],
[Identifies which source revision to use from --with-synthesis-src repository, empty string stands for latest. Default for default --synthesis-src: SYNTHESISSRC_REVISION]),
[REVISION="$withval"])
AC_ARG_ENABLE(shared,
AS_HELP_STRING([--enable-shared],
[build backends as dynamically loadable modules]),
enable_shared="$enableval", enable_shared="no")
AC_ARG_ENABLE(static,
AS_HELP_STRING([--enable-static],
[build backends also as static libraries]),
enable_static="$enableval", enable_static="no")
AC_ARG_ENABLE(unit-tests,
AS_HELP_STRING([--enable-unit-tests],
[enables tests embedded in the source code of the library (changes content of executable)]),
enable_unit_tests="$enableval", enable_unit_tests="no")
AC_ARG_ENABLE(integration-tests,
AS_HELP_STRING([--enable-integration-tests],
[enables tests outside of the library (can be used together with normal builds of the library)]),
enable_integration_tests="$enableval", enable_integration_tests="no")
AC_ARG_ENABLE(buteo-tests,
AS_HELP_STRING([--enable-buteo-tests],
[enables tests for Buteo sync framework. Not enabled when neither '--enable-unit-tests' nor '--enable-integration-tests' is specified]),
[ if test "$enable_unit_tests" = "yes" || test "$enable_integration_tests" = "yes" ; then
enable_buteo_tests="$enableval"
else
enable_buteo_tests="no"
fi], enable_buteo_tests="no")
PKG_CHECK_MODULES(BUTEOSYNCPROFILE, [syncprofile], HAVE_SYNCPROFILE=yes, HAVE_SYNCPROFILE=no)
PKG_CHECK_MODULES(BUTEOSYNCCOMMON, [synccommon], HAVE_SYNCCOMMON=yes, HAVE_SYNCCOMMON=no)
AC_ARG_ENABLE(static-cxx,
AS_HELP_STRING([--enable-static-cxx],
[build executables which contain libstdc++ instead of requiring suitable libstdc++.so to run]),
enable_static_cxx="$enableval", enable_static_cxx="no")
AC_ARG_ENABLE(evolution-compatibility,
AS_HELP_STRING([--enable-evolution-compatibility],
[build executables which only call Evolution via dlopen/dlsym: this avoids all hard dependencies on EDS shared objects, but might lead to crashes when their ABI changes]),
enable_evolution_compatibility="$enableval", enable_evolution_compatibility="no")
AC_ARG_ENABLE(developer-mode,
AS_HELP_STRING([--enable-developer-mode],
[The dynamic loadble backend libraries is loaded from current build directory instead of the standard library path]),
enable_developer_mode="$enableval", enable_developer_mode="no")
# Maemo hacks:
# - wrap e_book_from_string() to fix invalid parameter
# - don't use UTF-8 encoding in Perl script
AC_ARG_ENABLE(maemo,
AS_HELP_STRING([--enable-maemo],
[enables some hacks which work around problems with the Maemo 2.0 until at least 3.0 EDS-Dbus]),
[AC_DEFINE(ENABLE_MAEMO, 1, [enable Maemo hacks])
DEVICE_TYPE=Maemo
MODIFY_SYNCCOMPARE='-e "s/use encoding/#use encoding/;" -e "s/:utf8//;"'])
AC_SUBST(MODIFY_SYNCCOMPARE)
AC_CHECK_HEADERS(signal.h dlfcn.h)
# cppunit-config is used even when both unit tests and integration tests are disabled.
AC_PATH_PROG([CPPUNIT_CONFIG], [cppunit-config], [no])
test "x$CPPUNIT_CONFIG" != 'xno' || AC_MSG_ERROR("cppunit-config not found.")
# cppunit needed?
#if test "x$enable_unit_tests" = 'xyes' || test "x$enable_integration_tests" = 'xyes'
#then
CPPUNIT_CXXFLAGS=`$CPPUNIT_CONFIG --cflags`
CPPUNIT_LDFLAGS=`$CPPUNIT_CONFIG --libs`
#fi
AC_SUBST(CPPUNIT_CXXFLAGS)
AC_SUBST(CPPUNIT_LDFLAGS)
if test "x$enable_unit_tests" = 'xyes'; then
AC_DEFINE(ENABLE_UNIT_TESTS, 1, [enable unit tests inside the library's source code])
fi
if test "x$enable_integration_tests" = 'xyes'; then
AC_DEFINE(ENABLE_INTEGRATION_TESTS, 1, [enable integration tests inside the final library])
fi
if test "$enable_buteo_tests" = "yes"; then
AC_DEFINE(ENABLE_BUTEO_TESTS, 1, [enable buteo tests])
need_qt_modules="$need_qt_modules dbus xml"
AC_PATH_PROG(SQLITE3, sqlite3)
if test -z "$SQLITE3"; then
AC_MSG_ERROR([sqlite3 not found, is required for buteo testing])
fi
fi
AM_CONDITIONAL([ENABLE_UNIT_TESTS], [test "$enable_unit_tests" = "yes"])
AM_CONDITIONAL([ENABLE_TESTING], [test "$enable_unit_tests" = "yes" || test "$enable_integration_tests" = "yes" ])
AM_CONDITIONAL([ENABLE_BUTEO_TESTS], [test "$enable_buteo_tests" = "yes"])
if test $enable_static_cxx = "yes"; then
LIBS="$LIBS -L."
CORE_LDADD_DEP=libstdc++.a
fi
AC_SUBST(CORE_LDADD_DEP)
# Check for transport layer.
# Both curl and libsoup can be enabled and disabled explicitly.
# The default is to use libsoup if available, otherwise curl.
AC_MSG_CHECKING([for libcurl])
if LIBCURL_LIBS=`sh -c 'curl-config --libs' 2>&AS_MESSAGE_LOG_FD` && \
LIBCURL_CFLAGS=`sh -c 'curl-config --cflags' 2>&AS_MESSAGE_LOG_FD`; then
AC_MSG_RESULT([yes])
have_libcurl="yes"
else
AC_MSG_RESULT([no])
have_libcurl="no"
fi
PKG_CHECK_MODULES(LIBSOUP, libsoup-gnome-2.4,
[have_libsoup="yes"
AC_DEFINE(HAVE_LIBSOUP_SOUP_GNOME_FEATURES_H, 1, [enable GNOME specific libsoup])],
[PKG_CHECK_MODULES(LIBSOUP, libsoup-2.4,
have_libsoup="yes",
have_libsoup="no")])
PKG_CHECK_MODULES(LIBOPENOBEX, openobex, have_obex="yes", have_obex="no")
have_bluetooth="no"
if test $have_obex = "yes"; then
PKG_CHECK_MODULES(BLUEZ, bluez, have_bluez="yes", have_bluez="no")
if test $have_bluez = "yes"; then
have_bluetooth="yes"
fi
fi
AC_SUBST(LIBOPENOBEX_CFLAGS)
AC_SUBST(LIBOPENOBEX_LIBS)
AC_SUBST(BLUEZ_CFLAGS)
AC_SUBST(BLUEZ_LIBS)
TRANSPORT=
TRANSPORT_LIBS=
TRANSPORT_CFLAGS=
AC_ARG_WITH(ca-certificates,
AS_HELP_STRING([--with-ca-certificates=],
[Specifies location of one or more CA certificate files.
This sets the default value for the SSLServerCertificates option.
Default: empty when using libcurl (because it has its own default),
a list of paths known to work for Debian and Red Hat otherwise.]),
[CA_CERTIFICATES="$withval"])
# choose default http transport (mirrors code in EvolutionSyncClient::createTransportAgent())
if test "$have_libsoup" = "yes"; then
default_http_transport="libsoup"
elif test "$have_libcurl" = "yes"; then
default_http_transport="libcurl"
fi
AC_ARG_ENABLE(libcurl,
AS_HELP_STRING([--enable-libcurl],
[enable libcurl as transport layer]),
[ if test "$enableval" = "yes"; then
test "$have_libcurl" = "yes" || AC_MSG_ERROR([libcurl not found])
TRANSPORT="$TRANSPORT libcurl"
TRANSPORT_LIBS="$TRANSPORT_LIBS $LIBCURL_LIBS"
TRANSPORT_CFLAGS="$TRANSPORT_CFLAGS $LIBCURL_CFLAGS"
AC_DEFINE(ENABLE_LIBCURL, 1, [enable libcurl transport])
else
libcurl_disabled="yes"
fi ],
[ if test "$have_libcurl" = "yes" && test "$default_http_transport" = "libcurl" ; then
TRANSPORT="$TRANSPORT libcurl"
TRANSPORT_LIBS="$TRANSPORT_LIBS $LIBCURL_LIBS"
TRANSPORT_CFLAGS="$TRANSPORT_CFLAGS $LIBCURL_CFLAGS"
AC_DEFINE(ENABLE_LIBCURL, 1, [enable libcurl transport])
fi ])
AC_ARG_ENABLE(libsoup,
AS_HELP_STRING([--enable-libsoup],
[enable libsoup as transport layer]),
[ if test "$enableval" = "yes"; then
test "$have_libsoup" = "yes" || AC_MSG_ERROR([libsoup not found])
TRANSPORT="$TRANSPORT libsoup"
TRANSPORT_LIBS="$TRANSPORT_LIBS $LIBSOUP_LIBS"
TRANSPORT_CFLAGS="$TRANSPORT_CFLAGS $LIBSOUP_CFLAGS"
AC_DEFINE(ENABLE_LIBSOUP, 1, [enable libsoup transport])
else
libsoup_disabled="yes"
fi ],
[ if test "$have_libsoup" = "yes" && test "$default_http_transport" = "libsoup"; then
TRANSPORT="$TRANSPORT libsoup"
TRANSPORT_LIBS="$TRANSPORT_LIBS $LIBSOUP_LIBS"
TRANSPORT_CFLAGS="$TRANSPORT_CFLAGS $LIBSOUP_CFLAGS"
AC_DEFINE(ENABLE_LIBSOUP, 1, [enable libsoup transport])
fi ])
# SoupTransportAgent depends on glib
case "$TRANSPORT" in *libsoup*) need_glib=yes;; esac
bluetooth_disabled=no
AC_ARG_ENABLE(bluetooth,
AS_HELP_STRING([--enable-bluetooth],
[enable bluetooth transport support]),
[ enable_bluetooth="$enableval"
if test "$enableval" = "no"; then
bluetooth_disabled=yes
fi
],
[ enable_bluetooth="$have_bluetooth" ])
if test "$enable_bluetooth" = "yes"; then
# currently we need Bluetooth and OBEX support
test "$have_bluetooth" = "yes" || AC_MSG_ERROR([openobex or bluez not found])
AC_LANG(C)
CFLAGS_old="$CFLAGS"
CFLAGS="$CPPFLAGS $BLUEZ_CFLAGS"
# test in this order:
# - recent libbluetooth (no _safe variant, base function has bufsize)
# - intermediate with _safe
# - else assume old-style (no bufsize, no _safe)
#
# The source code checks the signature both by via pointer assignment and calling
# it (better safe than sorry). One these should fail if the signature is not right.
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
#include
#include
sdp_record_t *(*extract_pdu)(const uint8_t *pdata, int bufsize, int *scanned) =
sdp_extract_pdu;
void foo(void) {
uint8_t *pdata = NULL;
int scanned;
sdp_extract_pdu(pdata, 100, &scanned);
}
])],
AC_DEFINE(HAVE_BLUEZ_BUFSIZE, 1, [base libbluetooth functions accept bufsize parameter]),
AC_COMPILE_IFELSE([AC_LANG_SOURCE([
#include
#include
sdp_record_t *(*extract_pdu)(const uint8_t *pdata, int bufsize, int *scanned) =
sdp_extract_pdu_safe;
void foo(void) {
uint8_t *pdata = NULL;
int scanned;
sdp_extract_pdu_safe(pdata, 100, &scanned);
}
])],
AC_DEFINE(HAVE_BLUEZ_SAFE, 1, [libbluetooth has _safe variants])))
CFLAGS="$CFLAGS_old"
if test "$have_obex" = "yes"; then
AC_DEFINE(ENABLE_OBEX, 1, [define if openobex library is available])
fi
if test "$have_bluez" = "yes"; then
AC_DEFINE(ENABLE_BLUETOOTH, 1, [define if bluez library is available])
fi
fi
AM_CONDITIONAL([ENABLE_OBEX], [test "$have_obex" = "yes" && test "$enable_bluetooth" = "yes"])
AM_CONDITIONAL([ENABLE_BLUETOOTH], [test "$have_bluetooth" = "yes" && test "$enable_bluetooth" = "yes"])
if test ! "$TRANSPORT" &&
test "$libsoup_disabled" != "yes" &&
test "$libcurl_disabled" != "yes" &&
test "$bluetooth_disabled" != "yes" &&
test "$have_bluetooth" != "yes" ; then
AC_MSG_ERROR([no transport library found, configure with --disable-libcurl --disable-libsoup --disable-bluetooth to continue anyway (only useful if users of libsyncevolution provide transport implementation)])
fi
# for libsoup we must specify the SSL certificate file outself
if test "$libsoup_disabled" != "yes" && test -z "$CA_CERTIFICATES"; then
# Debian and Red Hat paths
CA_CERTIFICATES="/etc/ssl/certs/ca-certificates.crt:/etc/pki/tls/certs/ca-bundle.crt:/usr/share/ssl/certs/ca-bundle.crt"
fi
AC_DEFINE_UNQUOTED(SYNCEVOLUTION_SSL_SERVER_CERTIFICATES, "$CA_CERTIFICATES", [default value for SSLServerCertificates option])
AC_SUBST(TRANSPORT_LIBS)
AC_SUBST(TRANSPORT_CFLAGS)
AC_ARG_ENABLE(ssl-certificate-check,
AS_HELP_STRING([--disable-ssl-certificate-check],
[Disable SSL certificate checking in all server
*templates*. Users can still choose to enable or
disable it in their configuration. This is necessary on
platforms where the transport library has problems
verifying the server's certificate (libsoup + Google,
http://bugzilla.moblin.org/show_bug.cgi?id=4551)]),
enable_ssl_certificate_check="$enableval",
enable_ssl_certificate_check="yes")
if test "$enable_ssl_certificate_check" = "yes"; then
AC_DEFINE(ENABLE_SSL_CERTIFICATE_CHECK, 1, [enable SSL certificate check in server templates])
fi
# for dbus interface file mangling
AC_PATH_PROG(XSLT, xsltproc)
AC_ARG_ENABLE(gui,
AS_HELP_STRING([--enable-gui[=gui type]],
[enables building the GTK+ UI that uses the SyncEvolution DBus API.
Options: gtk, moblin, all (builds sync-ui-gtk and sync-ui-moblin)
"gtk" is the default for --enable-gui without type. No GUI is
built when --enable-gui is not used.]),
[ if test "$enableval" = "gtk" ; then
enable_gui=gtk
elif test "$enableval" = "yes" ; then
enable_gui=gtk
elif test "$enableval" = "moblin" ; then
enable_gui=moblin
elif test "$enableval" = "no" ; then
enable_gui=no
elif test "$enableval" = "all" ; then
enable_gui=all
else
AC_MSG_ERROR([Unknown gui type: '$enableval'])
fi
],
[ enable_gui=no ])
AM_CONDITIONAL([COND_GUI], [test "$enable_gui" != "no"])
AC_ARG_ENABLE(core,
AS_HELP_STRING([--enable-core],
[enables building the core SyncEvolution (library, backends)]),
enable_core="$enableval",
enable_core="yes")
AM_CONDITIONAL([COND_CORE], [test "$enable_core" = "yes"])
AC_ARG_ENABLE(dbus-service,
AS_HELP_STRING([--enable-dbus-service],
[enables building the dbus service executable and all related features
(the DBus wrapper library, command line usage of server, etc).]),
enable_dbus_service="$enableval",
[if test $enable_gui = "no"; then
enable_dbus_service="no"
else
enable_dbus_service="yes"
fi])
AM_CONDITIONAL([COND_DBUS], [test "$enable_dbus_service" = "yes"])
PKG_CHECK_MODULES(KEYRING, [gnome-keyring-1], HAVE_KEYRING=yes, HAVE_KEYRING=no)
AC_ARG_ENABLE(gnome-keyring,
AS_HELP_STRING([--enable-gnome-keyring],
[enables or disables support for the GNOME keyring; default is on if development files are available]),
[enable_gnome_keyring="$enableval"
test "$enable_gnome_keyring" = "yes" || test "$enable_gnome_keyring" = "no" || AC_MSG_ERROR([invalid value for --enable-gnome-keyring: $enable_gnome_keyring])
test "$enable_gnome_keyring" = "no" || test "$HAVE_KEYRING" = "yes" || AC_MSG_ERROR([gnome-keyring-1 pkg not found, needed for --enable-gnome-keyring])],
enable_gnome_keyring="$HAVE_KEYRING")
if test $enable_gnome_keyring = "yes"; then
AC_DEFINE(USE_GNOME_KEYRING, 1, [define if gnome keyring should be used in dbus service])
PKG_CHECK_MODULES([KEYRING_2_20], [gnome-keyring-1 >= 2.20 ], KEYRING220=yes, KEYRING220=no)
if test $KEYRING220 = "yes"; then
AC_DEFINE(GNOME_KEYRING_220, 1, [define if gnome keyring version is above 2.20])
fi
fi
## Begin KWallet ##############################
# first check for qmake-qt4, because qmake may point to qmake-qt3.
AC_CHECK_PROGS([QMAKE], [qmake-qt4 qmake])
if test "x$QMAKE" != 'x'
then
AC_PATH_PROG([KDE4_CONFIG], [kde4-config], [no])
if test "x$KDE4_CONFIG" != 'xno'
then
KDEKWALLETFOUND=yes
if ! test "$KDE_KWALLET_CFLAGS"; then
KDE_KWALLET_CFLAGS="-I`$KDE4_CONFIG --path include` -I`$KDE4_CONFIG --path include`/KDE -I`$QMAKE -query QT_INSTALL_HEADERS`"
fi
if ! test "$KDE_KWALLET_LIBS"; then
KDE_KWALLET_LIBS="-lkdeui -lkdecore `pkg-config --libs QtDBus`"
fi
AC_LANG_PUSH(C++)
old_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $KDE_KWALLET_CFLAGS"
AC_CHECK_HEADERS(kwallet.h, [], [KDEKWALLETFOUND=no])
CPPFLAGS="$old_CPPFLAGS"
AC_LANG_POP(C++)
else
KDEKWALLETFOUND=no
fi
else
KDEKWALLETFOUND=no
fi
# In contrast to the GNOME KEYRING, the KWallet is
# currently considered optional. "configure" will never enable
# by default, because that is a change that might not be
# expected by traditional users.
AC_ARG_ENABLE(kwallet,
AS_HELP_STRING([--enable-kwallet], [enable access to KWallet]),
[use_kde_kwallet="$enableval"
test $KDEKWALLETFOUND = "yes" || test "$use_kde_kwallet" = "no" || AC_MSG_ERROR([kwallet.pc not found. Install it to compile with the KWallet enabled.])],
[use_kde_kwallet="no"])
if test "$use_kde_kwallet" = "yes"; then
# conditional compilation in preprocessor
AC_DEFINE(USE_KDE_KWALLET, 1, [KWallet available])
# TODO: KWallet needs Qt. Enable the Qt check in
# configure-post.in, otherwise it fails to compiler
# when none of the backends ask for Qt.
else
# avoid unneeded dependencies on KWallet
KDE_KWALLET_CFLAGS=
KDE_KWALLET_LIBS=
fi
AC_SUBST(KDE_KWALLET_LIBS)
AC_SUBST(KDE_KWALLET_CFLAGS)
# conditional compilation in make
AM_CONDITIONAL([USE_KDE_KWALLET], [test "$use_kde_kwallet" = "yes"])
## End KWallet ################################
if test $enable_dbus_service = "yes"; then
if test -z "$XSLT"; then
AC_MSG_ERROR([xsltproc not found, is required for D-Bus service])
fi
PKG_CHECK_MODULES(DBUS, dbus-1, dummy=yes,
AC_MSG_ERROR(libdbus-1 is required))
AC_CHECK_LIB(dbus-1, dbus_watch_get_unix_fd, dummy=yes,
AC_DEFINE(NEED_DBUS_WATCH_GET_UNIX_FD, 1,
[Define to 1 if you need the dbus_watch_get_unix_fd() function.]))
need_glib=yes
# Recent libnotify releases work with gtk+-2.0 and gtk+-3.0. We
# pick gtk+-2.0 here, to be compatible with old libnotify releases
# which had that hard-cored and because sync-ui also depends on
# gtk+-2.0.
PKG_CHECK_MODULES(LIBNOTIFY, [libnotify gtk+-2.0], HAVE_LIBNOTIFY=yes, HAVE_LIBNOTIFY=no)
AC_ARG_ENABLE(notify,
AS_HELP_STRING([--enable-notify],
[send notifications for automatic sync events, using libnotify]),
[ test "$enableval" = "no" || test $HAVE_LIBNOTIFY = "yes" || AC_MSG_ERROR([required libnotify package not found]) ],
[ test $HAVE_LIBNOTIFY = "yes" || AC_MSG_ERROR([required libnotify package not found, use --disable-notify to compile without libnotify based notifications]) ])
if test $HAVE_LIBNOTIFY = "yes"; then
AC_DEFINE(HAS_NOTIFY, 1, [define if libnotify could be used in dbus service])
fi
AC_ARG_ENABLE(notify-compatibility,
AS_HELP_STRING([--enable-notify-compatibility],
[increase compatibility with binary libnotify installations by loading libnotify.so.1..4 dynamically instead of linking against it]),
[enable_notify_compat="$enableval"],
[enable_notify_compat="no"]
)
if test "$enable_notify_compat" = "yes"; then
AC_DEFINE(NOTIFY_COMPATIBILITY, 1, [dynamically open libnotify])
LIBNOTIFY_LIBS="`echo $LIBNOTIFY_LIBS | sed -e 's/\(-lnotify\|[^ ]*libnotify.la\)/-ldl/'`"
fi
# Here we're using QtGui too because mlite fails to depend on it,
# despite using QAction.
PKG_CHECK_MODULES(MLITE, [mlite QtGui], HAVE_MLITE=yes, HAVE_MLITE=no)
AC_ARG_ENABLE(mlite,
AS_HELP_STRING([--enable-mlite],
[send notifications for automatic sync events, using mlite (off by default)]),
[ enable_mlite="$enableval"
test "$enableval" = "no" || test $HAVE_MLITE = "yes" || AC_MSG_ERROR([required mlite package not found]) ],
[ enable_mlite="no" ])
if test $enable_mlite = "yes"; then
AC_DEFINE(HAS_MLITE, 1, [define if mlite could be used in dbus service])
else
# don't use mlite, even if found
MLITE_CFLAGS=
MLITE_LIBS=
fi
AC_DEFINE(DBUS_SERVICE, 1, [define if dbus service is enabled])
fi
AM_CONDITIONAL([NOTIFY_COMPATIBILITY], [test "$enable_notify_compat" = "yes"])
AC_SUBST(DBUS_CFLAGS)
AC_SUBST(DBUS_LIBS)
AC_SUBST(DBUS_GLIB_CFLAGS)
AC_SUBST(DBUS_GLIB_LIBS)
AC_SUBST(KEYRING_CFLAGS)
AC_SUBST(KEYRING_LIBS)
AC_SUBST(LIBNOTIFY_CFLAGS)
AC_SUBST(LIBNOTIFY_LIBS)
AC_SUBST(LIBEXECDIR)
AC_SUBST(BUTEOSYNCPROFILE_LIBS)
AC_SUBST(BUTEOSYNCPROFILE_CFLAGS)
AC_SUBST(BUTEOSYNCCOMMON_LIBS)
AC_SUBST(BUTEOSYNCCOMMON_CFLAGS)
DBUS_SERVICES_DIR="${datadir}/dbus-1/services"
AC_SUBST(DBUS_SERVICES_DIR)
AC_DEFINE_UNQUOTED(DBUS_SERVICES_DIR, "$DBUS_SERVICES_DIR", [Location of D-Bus services directory])
if test $enable_gui != "no" || test $enable_dbus_service = "yes"; then
IT_PROG_INTLTOOL([0.37.1])
GETTEXT_PACKAGE=syncevolution
AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, "$GETTEXT_PACKAGE", [The gettext package name])
AM_GLIB_GNU_GETTEXT
SYNCEVOLUTION_LOCALEDIR=[${datadir}/locale]
fi
# decide which sync-ui(s) we are building:
# sync-ui (in either GTK or Moblin mode) or both (in separate binaries)
case $enable_gui in
all) GUI_PROGRAMS='src/gtk-ui/sync-ui-gtk${EXEEXT} src/gtk-ui/sync-ui-moblin${EXEEXT}'; GUI_DESKTOP_FILES="src/gtk-ui/sync-gtk.desktop src/gtk-ui/sync-moblin.desktop";;
gtk|moblin) GUI_PROGRAMS='src/gtk-ui/sync-ui${EXEEXT}'; GUI_DESKTOP_FILES="src/gtk-ui/sync.desktop";;
no) GUI_PROGRAMS=; GUI_DESKTOP_FILES=;;
*) AC_MSG_ERROR([Unknown enable_gui type: '$enable_gui'])
esac
if test $enable_gui != "no"; then
PKG_CHECK_MODULES(DBUS_GLIB, dbus-glib-1 glib-2.0)
AC_PATH_PROG(DBUS_BINDING_TOOL, dbus-binding-tool)
AC_PATH_PROG(GLIB_GENMARSHAL, glib-genmarshal)
gui_modules="glib-2.0 dbus-glib-1 >= 0.60 gtk+-2.0 libglade-2.0 gio-2.0"
if test $enable_gui = "moblin"; then
AC_DEFINE(USE_MOBLIN_UX, 1, [Use Moblin UI widgets])
fi
if test $enable_gui = "moblin" -o $enable_gui = "all"; then
gui_modules="$guimodules mx-gtk-1.0"
PKG_CHECK_MODULES(MX_GTK_0_99_1, mx-gtk-1.0 >= 0.99.1,
have_mx_gtk_0_99_1="yes",
have_mx_gtk_0_99_1="no")
if test $have_mx_gtk_0_99_1 = "yes"; then
AC_DEFINE(MX_GTK_0_99_1, 1, [we have Mx-Gtk 0.99.1 or better])
fi
fi
PKG_CHECK_MODULES(UNIQUE, unique-1.0,
have_unique="yes",
have_unique="no")
if test $have_unique = "yes"; then
gui_modules="$gui_modules unique-1.0"
AC_DEFINE(ENABLE_UNIQUE, 1, [enable single-app-instance functionality])
fi
PKG_CHECK_MODULES(GTK_2_18, gtk+-2.0 >= 2.18,
have_gtk_2_18="yes",
have_gtk_2_18="no")
if test $have_gtk_2_18 = "yes"; then
AC_DEFINE(GTK_2_18, 1, [we have GTK+ 2.18 or better])
fi
PKG_CHECK_MODULES(GUI, $gui_modules)
AC_PATH_PROG([GTK_BUILDER_CONV], gtk-builder-convert)
elif test "$enable_dbus_service" = "yes"; then
# syncevo-dbus-server needs localization
:
else
INTLTOOL_UPDATE="true"
USE_NLS="no"
fi
AC_SUBST(SYNCEVOLUTION_LOCALEDIR)
AC_SUBST(GETTEXT_PACKAGE)
AC_SUBST(GUI_CFLAGS)
AC_SUBST(GUI_LIBS)
AC_SUBST(GUI_PROGRAMS)
AC_SUBST(GUI_DESKTOP_FILES)
# Boost headers: boost/foreach.hpp is needed (1.33/Debian Etch
# doesn't have it, 1.34/Ubuntu 8.10 Hardy does). 1.35 is available
# as Debian Etch backport.
AX_BOOST_BASE(1.34)
# need rst2man for man pages
AC_ARG_WITH(rst2man,
AS_HELP_STRING([--with-rst2man=],
[Specifies an explicit path to the utility if not found in PATH.
An explicit --without-rst2man or not having it installed turn off
building of man pages.]),
[RST2MAN=$withval
if test "$RST2MAN" = "yes"; then
AC_PATH_PROG(RST2MAN, rst2man, "no")
fi
test "$RST2MAN" = "no" || test -x "$RST2MAN" || AC_MSG_ERROR([--with-rst2man=$RST2MAN: tool not found])],
[AC_PATH_PROG(RST2MAN, rst2man, "no")])
AM_CONDITIONAL([COND_MAN_PAGES], [test "$RST2MAN" != "no"])
# need rst2html for HTML version of README
AC_ARG_WITH(rst2html,
AS_HELP_STRING([--with-rst2html=],
[Specifies an explicit path to the utility if not found in PATH.
An explicit --without-rst2html or not having it installed turn off
building of README in HTML format.]),
[RST2HTML=$withval
if test "$RST2HTML" = "yes"; then
AC_PATH_PROG(RST2HTML, rst2html, "no")
fi
test "$RST2HTML" = "no" || test -x "$RST2HTML" || AC_MSG_ERROR([--with-rst2html=$RST2HTML: tool not found])],
[AC_PATH_PROG(RST2HTML, rst2html, "no")])
AM_CONDITIONAL([COND_HTML_README], [test "$RST2HTML" != "no"])
# absolute patch to source of Synthesis client library
SYNTHESIS_SRC=no-synthesis-source
AC_SUBST(SYNTHESIS_SRC)
if test "$SYNTHESISSRC" && test "$SYNTHESISSRC" != "none"; then
# default: checkout a copy of the sources, remove it during maintainer-clean and distclean
CLEAN_CLIENT_SRC=synthesis-workdir
SYNTHESIS_SRC=$PWD/src/synthesis-workdir
AC_MSG_NOTICE( [updating the content of $SYNTHESIS_SRC from $SYNTHESISSRC] )
case "$SYNTHESISSRC" in
*.git) protocol=git;;
*://*) protocol="`echo $SYNTHESISSRC | sed -e 's;://.*;;'`";;
*) protocol="file";;
esac
mkdir -p src
case $protocol in
file)
# use existing copy of the sources
CLEAN_CLIENT_SRC=
case "$SYNTHESISSRC" in
/*) SYNTHESIS_SRC="$SYNTHESISSRC";;
*) SYNTHESIS_SRC="$PWD/$SYNTHESISSRC";;
esac
;;
*svn*|*http*)
SYNTHESISSRCREV="$SYNTHESISSRC"
if test "$REVISION"; then
revarg="-r $REVISION "
if `echo $SYNTHESISSRC | grep '@[0123456789]*'` >/dev/null; then
:
else
SYNTHESISSRCREV="$SYNTHESISSRC@$REVISION"
fi
fi
if test -d $SYNTHESIS_SRC ; then
( set -x; cd $SYNTHESIS_SRC && svn --username=$USERNAME switch $revarg "$SYNTHESISSRC" ) || AC_MSG_ERROR([updating from $SYNTHESISSRC failed])
else
(set -x; svn --username=$USERNAME checkout $revarg "$SYNTHESISSRCREV" $SYNTHESIS_SRC ) || AC_MSG_ERROR([checking out $SYNTHESISSRC failed])
fi
;;
*)
if test -d $SYNTHESIS_SRC ; then
( set -x; cd $SYNTHESIS_SRC && git fetch "$SYNTHESISSRC" ) || AC_MSG_ERROR([updating from $SYNTHESISSRC failed])
else
( set -x; git clone "$SYNTHESISSRC" $SYNTHESIS_SRC ) || AC_MSG_ERROR([cloning $SYNTHESISSRC failed])
fi
if test "$REVISION"; then
# git 1.6 finds tags and branches without explicit prefix, 1.4.4.4 doesn't
( set -x; cd $SYNTHESIS_SRC &&
(git checkout "$REVISION" ||
git checkout "tags/$REVISION" ||
git checkout "origin/$REVISION") ) || AC_MSG_ERROR([checking out $SYNTHESISSRC failed])
fi
;;
esac
elif test "$SYNTHESISSRC" != "none" && test -d $srcdir/src/synthesis; then
# use existing copy of the sources; beware of
# out-of-tree compilation
case $srcdir in
/*) SYNTHESIS_SRC="$srcdir/src/synthesis";;
*) SYNTHESIS_SRC="$PWD/$srcdir/src/synthesis";;
esac
elif test "$enable_shared" = "no"; then
# link against engine
PKG_CHECK_MODULES([SYNTHESIS], [synthesis >= 3.4])
SYNTHESIS_ENGINE="$SYNTHESIS_LIBS -lsynthesis"
else
# link against SDK alone, except in client-test
#PKG_CHECK_MODULES(SYNTHESIS, "synthesis-sdk")
#SYNTHESIS_ENGINE="`echo $SYNTHESIS_LIBS | sed -e 's/-lsynthesisstubs/-lsynthesis/'`"
# can't use the SDK alone because of sysync::SySyncDebugPuts()
PKG_CHECK_MODULES([SYNTHESIS], [synthesis >= SYNTHESIS_MIN_VERSION])
SYNTHESIS_ENGINE="$SYNTHESIS_LIBS"
fi
if test $SYNTHESIS_SRC != "no-synthesis-source"; then
( cd $SYNTHESIS_SRC && ( test -f configure || sh autogen.sh ) ) || AC_MSG_ERROR([--with-synthesis-src=$SYNTHESIS_SRC: no Synthesis configure script found in that directory])
SYNTHESIS_CONFIGURE="$SYNTHESIS_SRC/configure"
chmod u+x $SYNTHESIS_SRC/configure $SYNTHESIS_SRC/config.sub $SYNTHESIS_SRC/config.guess
# use local copy of the sources, with dependencies
# to trigger building the synthesis library
SYNTHESIS_SUBDIR=$PWD/src/build-synthesis
SYNTHESIS_CFLAGS="-I$SYNTHESIS_SUBDIR/src"
SYNTHESIS_LIBS="$SYNTHESIS_SUBDIR/src/libsynthesissdk.la"
if test "x$enable_core" = "xno" && test "x$enable_gui" != "xno"; then
# SYNTHESIS_SUBDIR is ignored, at least build headers for GUI
SYNTHESIS_SUBDIR_INCLUDES=src/synthesis-includes
fi
if test "$enable_shared" = "no"; then
# link against the engines that were enabled
case $SYNCML_ENGINES in both|client|server) SYNTHESIS_LIBS="$SYNTHESIS_LIBS $SYNTHESIS_SUBDIR/src/libsynthesis.la";; esac
AC_DEFINE(ENABLE_SYNCML_LINKED, 1, [SyncML engines are linked directly])
else
# It would be nice if we could avoid linking against libsynthesis.la here.
# This doesn't work at the moment because sysync::SySyncDebugPuts()
# is called directly by the libsynthesissdk instead of going through
# the normal C function pointer lookup.
SYNTHESIS_LIBS="$SYNTHESIS_LIBS $SYNTHESIS_SUBDIR/src/libsynthesis.la"
fi
SYNTHESIS_DEP=$SYNTHESIS_LIBS
# for linking client-test
SYNTHESIS_ENGINE="$SYNTHESIS_SUBDIR/src/libsynthesis.la"
AC_MSG_NOTICE( [configuring the Synthesis library] )
if (set -x; mkdir -p $SYNTHESIS_SUBDIR && cd $SYNTHESIS_SUBDIR && eval "\$SHELL \"\$SYNTHESIS_CONFIGURE\" $ac_configure_args \"--srcdir=\$SYNTHESIS_SRC\" " ); then true; else
AC_MSG_ERROR( [configuring Synthesis library failed] )
fi
# do the version check with the .pc files prepared by the configure step above
export PKG_CONFIG_PATH=$SYNTHESIS_SUBDIR:$PKG_CONFIG_PATH
PKG_CHECK_MODULES([WITH_SYNTHESIS_SRC], [synthesis >= SYNTHESIS_MIN_VERSION],
[],
[AC_MSG_ERROR([need at least libsynthesis >= SYNTHESIS_MIN_VERSION; the latest libsynthesis for SyncEvolution is the one from http://meego.gitorious.org/meego-middleware/libsynthesis])])
fi
AC_SUBST(SYNTHESIS_CFLAGS)
AC_SUBST(SYNTHESIS_LIBS)
AC_SUBST(SYNTHESIS)
AC_SUBST(SYNTHESIS_SUBDIR)
AC_SUBST(SYNTHESIS_SUBDIR_INCLUDES)
AC_SUBST(SYNTHESIS_DEP)
AC_SUBST(SYNTHESIS_ENGINE)
AC_SUBST(SYNTHESIS_LIB)
AC_SUBST(SYNTHESISSRC)
BACKEND_CPPFLAGS="$SYNTHESIS_CFLAGS $EPACKAGE_CFLAGS $EBOOK_CFLAGS $ECAL_CFLAGS $GLIB_CFLAGS $BOOST_CPPFLAGS"
AC_SUBST(BACKEND_CPPFLAGS)
# GNOME Bluetooth Panel plugin
PKG_CHECK_MODULES(GNOMEBLUETOOTH, [gnome-bluetooth-1.0 >= 2.27.6],
[have_gbt="yes"
GNOMEBLUETOOTH_DIR=`$PKG_CONFIG --variable=libdir gnome-bluetooth-1.0 2>/dev/null`/gnome-bluetooth],
have_gbt="no")
AC_SUBST(GNOMEBLUETOOTH_CFLAGS)
AC_SUBST(GNOMEBLUETOOTH_DIR)
AC_ARG_ENABLE(gnome-bluetooth-panel-plugin,
AS_HELP_STRING([--enable-gnome-bluetooth-panel-plugin],
[GNOME Bluetooth panel plugin adding a "sync" button for paired devices (off by default)]),
[enable_gnome_bluetooth_panel="$enableval"],
[enable_gnome_bluetooth_panel="no"]
)
if test "$enable_gnome_bluetooth_panel" = "yes"; then
test "$have_gbt" = "yes" || AC_MSG_ERROR([--enable-gnome-bluetooth-panel requires
pkg-config information for gnome-bluetooth-1.0 >= 2.27.6 which was not found])
fi
AM_CONDITIONAL([ENABLE_GNOME_BLUETOOTH_PANEL], [test "$have_gbt" = "yes" && test "$enable_gnome_bluetooth_panel" = "yes"])
AC_ARG_ENABLE(doc,
AS_HELP_STRING([--enable-doc],
[generate backend and DBus API documentation]),
enable_doc="$enableval", enable_doc="no")
AM_CONDITIONAL([COND_DOC], [test "$enable_doc" != "no"])
dnl add backends stuff.
SE_ADD_BACKENDS
dnl -*- mode: Autoconf; -*-
dnl Invoke autogen.sh to produce a configure script.
AC_ARG_ENABLE(qt-dbus,
AS_HELP_STRING([--enable-qt-dbus],
[build Qt bindings for D-Bus]),
enable_qt_dbus="$enableval", enable_qt_dbus="no")
if test "$enable_qt_dbus" = "yes"; then
AC_DEFINE(ENABLE_QT_DBUS, 1, [Qt D-Bus bindings available])
need_qt_modules="$need_qt_modules +dbus"
AC_PATH_PROG([QDBUSXML_TO_CPP], [qdbusxml2cpp], [no])
test "x$QDBUSXML_TO_CPP" != 'xno' || AC_MSG_ERROR([--enable-qt-dbus requires qdbusxml2cpp, which was not found])
fi
AM_CONDITIONAL([ENABLE_QT_DBUS], [test "$enable_qt_dbus" = "yes"])
AC_SUBST(QT_DBUS_LIBS)
AC_CONFIG_FILES([src/dbus/qt/syncevolution-qt-dbus.pc])
dnl -*- mode: Autoconf; -*-
dnl Invoke autogen.sh to produce a configure script.
dnl configure-pre.in and src/backends/*/configure-sub.in and configure-post.in come before this part
AC_SUBST(BACKEND_CPPFLAGS)
enable_any="no"
backend_is_enabled () {
eval echo \${enable_${1}}
}
for backend in $BACKENDS; do
if test `backend_is_enabled $backend` = "yes"; then
enable_any="yes"
SYNCEVOLUTION_MODULES="$SYNCEVOLUTION_MODULES src/backends/sync${backend}.la"
fi
done
if test "$enable_any" = "no"; then
AC_MSG_ERROR([no backend enabled - refusing to continue: $anymissing])
fi
dnl glib initialization is done only if requested by some configure-sub.in,
dnl for not needed otherwise even if found
if test "$need_glib" = "yes"; then
# HAVE_GLIB (aka GLIBFOUND) are a catch-all for these
# three GNOME libs. Assume we have all three unless one of
# the checks fails.
GLIBFOUND=yes
dnl check for glib - calling g_type_init() is expected on Maemo
PKG_CHECK_MODULES(GLIB, "glib-2.0", , GLIBFOUND=no)
# This check here is broken on Ubuntu 8.04: it calls glib-config,
# which isn't found, but the error is not detected by configure.
#if test "x${GLIBFOUND}" = "xno"; then
# PKG_CHECK_MODULES(GLIB, "glib", GLIBFOUND=yes, GLIBFOUND=no)
#fi
PKG_CHECK_MODULES(GTHREAD, "gthread-2.0", , GLIBFOUND=no)
PKG_CHECK_MODULES(GOBJECT, "gobject-2.0", , GLIBFOUND=no)
PKG_CHECK_MODULES(GIO, "gio-2.0", , GLIBFOUND=no)
if test "x${GLIBFOUND}" = "xyes"; then
AC_DEFINE(HAVE_GLIB, 1, [glib found])
else
AC_MSG_ERROR([not all GNOME libraries found])
fi
BACKEND_CPPFLAGS="$BACKEND_CPPFLAGS $GLIB_CFLAGS $GTHREAD_CFLAGS $GOBJECT_CFLAGS"
fi
# Check for Qt if some backend needs it.
if test "$need_qt_modules"; then
AT_WITH_QT([-gui $need_qt_modules],
[$qt_config],
[$qt_misc])
fi
# determine from where we can get a SHA-256 implementation
have_sha="no"
if test "$GLIBFOUND" = "yes"; then
# only use glib if we need it anyway, also has to be at lease 2.16
PKG_CHECK_MODULES(GLIB216, [glib-2.0 >= 2.16],
[AC_DEFINE(USE_SHA256, 1, [choose implementation of SHA-256])
have_sha="glib"],
[true])
fi
if test "$have_sha" = "no"; then
# Fallback is Mozilla NSS. In contrast to libgcrypt it has a .pc
# file and a simple API.
PKG_CHECK_MODULES(NSS, "nss",
[AC_DEFINE(USE_SHA256, 2, [choose implementation of SHA-256])
have_sha="nss"],
[true])
fi
dnl figure out whether we link all code statically or as modules
AM_CONDITIONAL([ENABLE_MODULES], [test "$enable_shared" = "yes"])
if test "$enable_shared" = "yes"; then
AC_DEFINE(ENABLE_MODULES, 1, [enable dynamically opening sync source backends])
fi
AC_SUBST(SYNCEVOLUTION_LDADD)
dnl CXXFLAGS gets applied to SyncEvolution and the client library.
dnl For e.g. "-Wall -Werror" this might not be such a good idea;
dnl SYNCEVOLUTION_CXXFLAGS can be used instead. It applies only
dnl to the sources in the SyncEvolution repository.
AC_SUBST(SYNCEVOLUTION_CXXFLAGS)
dnl a quick-and-dirty way to detect compilation for the iPhone
if test "$host" = "arm-apple-darwin"; then
AC_DEFINE(IPHONE, 1, [compiling for iPhone])
DEVICE_TYPE=iPhone
fi
dnl --enable-evolution-compatibility
if test "$enable_evolution_compatibility" = "yes"; then
AC_DEFINE(EVOLUTION_COMPATIBILITY, 1, [avoid hard dependency on Evolution shared objects])
# don't link against libs wrapped by eds_abi_wrapper (no longer limited to EDS alone...)
ECAL_LIBS=
EBOOK_LIBS=
EPACKAGE_LIBS=
BLUEZ_LIBS=
fi
AM_CONDITIONAL([ENABLE_EVOLUTION_COMPATIBILITY], [test "$enable_evolution_compatibility" = "yes"])
PKG_CHECK_MODULES(LIBICAL_AVAILABLE,
libical >= 0.43,
AC_DEFINE(HAVE_LIBICAL_R, 1, [have recent enough libical with _r variants]),
pass)
dnl --enable-developer-mode
if test "$enable_developer_mode" = "yes"; then
BACKENDS_SEARCH_DIRECTORY="`pwd`/src/backends/"
else
BACKENDS_SEARCH_DIRECTORY='$(libdir)/syncevolution/backends/'
fi
BACKENDS_DIRECTORY='$(libdir)/syncevolution/backends'
AC_SUBST(BACKENDS_DIRECTORY)
AC_SUBST(BACKENDS_SEARCH_DIRECTORY)
# for ActiveSync backend
syncevo_backenddir='$(libdir)'/syncevolution/backends
AC_SUBST(syncevo_backenddir)
dnl This string is sent as part of the SyncML DevInf (device
dnl information) structure to the server. All SyncEvolution platforms
dnl use "SyncEvolution" as HTTP user agent and "Mod" (model), so the
dnl device type is the only way how different kinds of clients can be
dnl distinguished.
AC_DEFINE_UNQUOTED(DEVICE_TYPE, "$DEVICE_TYPE", "SyncML DevInf DevType")
AC_CHECK_HEADERS(stdarg.h valgrind/valgrind.h execinfo.h)
AC_DEFINE(SYNTHESIS, 1, "using Synthesis engine")
# fallback for lack of --with-docdir support in older automake
if test ! "$docdir"; then
docdir = ${datadir}/doc/syncevolution
AC_SUBST(docdir)
fi
AC_ARG_ENABLE(dbus-timeout-hack,
AS_HELP_STRING([--enable-dbus-timeout-hack],
[Enables code which overrides the default timeout in dbus_connection_send_with_reply() so that the method call never times out. Needed for libecal/ebook >= 2.30, so enabled by default if either of these is enabled.]),
[enable_dbus_timeout_hack=$enableval],
[if test $enable_ebook = "yes" || test $enable_ecal = "yes"; then
enable_dbus_timeout_hack="yes"
fi])
if test "$enable_dbus_timeout_hack" = "yes"; then
AC_DEFINE(ENABLE_DBUS_TIMEOUT_HACK, 1, [overrides the default D-Bus timeout so that synchronous calls never time out])
fi
# Avoid hard-coding paths in backends. These names are chosen so
# that a backend can alternatively use its own top-level configure
# with PKG_CHECK_MODULES(SYNCEVOLUTION, "syncevolution") to set them.
# need absolute path, use pwd instead of relative $srcdir
SYNCEVOLUTION_CFLAGS=-I`cd $srcdir && pwd`/src
SYNCEVOLUTION_LIBS=`pwd`/src/syncevo/libsyncevolution.la
AC_SUBST(SYNCEVOLUTION_CFLAGS)
AC_SUBST(SYNCEVOLUTION_LIBS)
AC_CONFIG_FILES([
Makefile
src/syncevo/syncevolution.pc
src/synthesis-includes/Makefile
po/Makefile.in
src/dbus/glib/syncevo-dbus.pc
])
AC_OUTPUT
echo
echo CONFIGURATION SUMMARY
echo "Core SyncEvolution: $enable_core"
for backend in $BACKENDS; do
eval echo $backend: \${enable_${backend}}
done
echo "DBus service: $enable_dbus_service"
echo "GNOME keyring: $enable_gnome_keyring"
echo "UI (DBus client): $enable_gui"
echo "Bluetooth transport: $have_bluetooth"
echo "GNOME Bluetooth panel plugin: $enable_gnome_bluetooth_panel"
echo "SHA-256: $have_sha"
echo "API documentation: $enable_doc"
echo "D-Bus Timeout Hack: $enable_dbus_timeout_hack"
echo