main: force enabling of I/O thread

Enabling the I/O thread by default seems like an important part of declaring
1.0.  Besides allowing true SMP support with KVM, the I/O thread means that the
TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which
currently requires a (racey) signal based alarm system.

I know there have been concerns about performance.  I think so far the ones that
have come up (virtio-net) are most likely due to secondary reasons like
decreased batching.

I think we ought to force enabling I/O thread early in 1.0 development and
commit to resolving any lingering issues.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

6 files changed, 1 insertions, 232 deletions

diff --git a/configure b/configure
index 1fb31c79a..eba6fc611 100755
--- a/configure
+++ b/configure
@@ -165,7 +165,6 @@ darwin_user="no"
 bsd_user="no"
 guest_base=""
 uname_release=""
-io_thread="no"
 mixemu="no"
 aix="no"
 blobs="yes"
@@ -723,8 +722,6 @@ for opt do
   ;;
   --enable-attr) attr="yes"
   ;;
-  --enable-io-thread) io_thread="yes"
-  ;;
   --disable-blobs) blobs="no"
   ;;
   --with-pkgversion=*) pkgversion=" ($optarg)"
@@ -2158,12 +2155,6 @@ EOF
 
 if compile_prog "" "" ; then
   signalfd=yes
-elif test "$kvm" = "yes" -a "$io_thread" != "yes"; then
-  echo
-  echo "ERROR: Host kernel lacks signalfd() support,"
-  echo "but KVM depends on it when the IO thread is disabled."
-  echo
-  exit 1
 fi
 
 # check if eventfd is supported
@@ -2710,7 +2701,6 @@ echo "NPTL support      $nptl"
 echo "GUEST_BASE        $guest_base"
 echo "PIE user targets  $user_pie"
 echo "vde support       $vde"
-echo "IO thread         $io_thread"
 echo "Linux AIO support $linux_aio"
 echo "ATTR/XATTR support $attr"
 echo "Install blobs     $blobs"
@@ -2968,9 +2958,6 @@ if test "$xen" = "yes" ; then
   echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
   echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
 fi
-if test "$io_thread" = "yes" ; then
-  echo "CONFIG_IOTHREAD=y" >> $config_host_mak
-fi
 if test "$linux_aio" = "yes" ; then
   echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
 fi
diff --git a/cpus.c b/cpus.c
index b163efe4a..54c188cf5 100644
--- a/cpus.c
+++ b/cpus.c
@@ -173,12 +173,9 @@ static void cpu_handle_guest_debug(CPUState *env)
 {
     gdb_set_stop_cpu(env);
     qemu_system_debug_request();
-#ifdef CONFIG_IOTHREAD
     env->stopped = 1;
-#endif
 }
 
-#ifdef CONFIG_IOTHREAD
 static void cpu_signal(int sig)
 {
     if (cpu_single_env) {
@@ -186,7 +183,6 @@ static void cpu_signal(int sig)
     }
     exit_request = 1;
 }
-#endif
 
 #ifdef CONFIG_LINUX
 static void sigbus_reraise(void)
@@ -262,12 +258,6 @@ static void qemu_kvm_eat_signals(CPUState *env)
             exit(1);
         }
     } while (sigismember(&chkset, SIG_IPI) || sigismember(&chkset, SIGBUS));
-
-#ifndef CONFIG_IOTHREAD
-    if (sigismember(&chkset, SIGIO) || sigismember(&chkset, SIGALRM)) {
-        qemu_notify_event();
-    }
-#endif
 }
 
 #else /* !CONFIG_LINUX */
@@ -390,7 +380,6 @@ static int qemu_signal_init(void)
     int sigfd;
     sigset_t set;
 
-#ifdef CONFIG_IOTHREAD
     /* SIGUSR2 used by posix-aio-compat.c */
     sigemptyset(&set);
     sigaddset(&set, SIGUSR2);
@@ -409,18 +398,6 @@ static int qemu_signal_init(void)
     sigaddset(&set, SIGIO);
     sigaddset(&set, SIGALRM);
     sigaddset(&set, SIGBUS);
-#else
-    sigemptyset(&set);
-    sigaddset(&set, SIGBUS);
-    if (kvm_enabled()) {
-        /*
-         * We need to process timer signals synchronously to avoid a race
-         * between exit_request check and KVM vcpu entry.
-         */
-        sigaddset(&set, SIGIO);
-        sigaddset(&set, SIGALRM);
-    }
-#endif
     pthread_sigmask(SIG_BLOCK, &set, NULL);
 
     sigfd = qemu_signalfd(&set);
@@ -447,7 +424,6 @@ static void qemu_kvm_init_cpu_signals(CPUState *env)
     sigact.sa_handler = dummy_signal;
     sigaction(SIG_IPI, &sigact, NULL);
 
-#ifdef CONFIG_IOTHREAD
     pthread_sigmask(SIG_BLOCK, NULL, &set);
     sigdelset(&set, SIG_IPI);
     sigdelset(&set, SIGBUS);
@@ -456,17 +432,7 @@ static void qemu_kvm_init_cpu_signals(CPUState *env)
         fprintf(stderr, "kvm_set_signal_mask: %s\n", strerror(-r));
         exit(1);
     }
-#else
-    sigemptyset(&set);
-    sigaddset(&set, SIG_IPI);
-    sigaddset(&set, SIGIO);
-    sigaddset(&set, SIGALRM);
-    pthread_sigmask(SIG_BLOCK, &set, NULL);
 
-    pthread_sigmask(SIG_BLOCK, NULL, &set);
-    sigdelset(&set, SIGIO);
-    sigdelset(&set, SIGALRM);
-#endif
     sigdelset(&set, SIG_IPI);
     sigdelset(&set, SIGBUS);
     r = kvm_set_signal_mask(env, &set);
@@ -478,7 +444,6 @@ static void qemu_kvm_init_cpu_signals(CPUState *env)
 
 static void qemu_tcg_init_cpu_signals(void)
 {
-#ifdef CONFIG_IOTHREAD
     sigset_t set;
     struct sigaction sigact;
 
@@ -489,7 +454,6 @@ static void qemu_tcg_init_cpu_signals(void)
     sigemptyset(&set);
     sigaddset(&set, SIG_IPI);
     pthread_sigmask(SIG_UNBLOCK, &set, NULL);
-#endif
 }
 
 #else /* _WIN32 */
@@ -535,106 +499,6 @@ static void qemu_tcg_init_cpu_signals(void)
 }
 #endif /* _WIN32 */
 
-#ifndef CONFIG_IOTHREAD
-int qemu_init_main_loop(void)
-{
-    int ret;
-
-    ret = qemu_signal_init();
-    if (ret) {
-        return ret;
-    }
-
-    qemu_init_sigbus();
-
-    return qemu_event_init();
-}
-
-void qemu_main_loop_start(void)
-{
-}
-
-void qemu_init_vcpu(void *_env)
-{
-    CPUState *env = _env;
-    int r;
-
-    env->nr_cores = smp_cores;
-    env->nr_threads = smp_threads;
-
-    if (kvm_enabled()) {
-        r = kvm_init_vcpu(env);
-        if (r < 0) {
-            fprintf(stderr, "kvm_init_vcpu failed: %s\n", strerror(-r));
-            exit(1);
-        }
-        qemu_kvm_init_cpu_signals(env);
-    } else {
-        qemu_tcg_init_cpu_signals();
-    }
-}
-
-int qemu_cpu_is_self(void *env)
-{
-    return 1;
-}
-
-void run_on_cpu(CPUState *env, void (*func)(void *data), void *data)
-{
-    func(data);
-}
-
-void resume_all_vcpus(void)
-{
-}
-
-void pause_all_vcpus(void)
-{
-}
-
-void qemu_cpu_kick(void *env)
-{
-}
-
-void qemu_cpu_kick_self(void)
-{
-#ifndef _WIN32
-    assert(cpu_single_env);
-
-    raise(SIG_IPI);
-#else
-    abort();
-#endif
-}
-
-void qemu_notify_event(void)
-{
-    CPUState *env = cpu_single_env;
-
-    qemu_event_increment ();
-    if (env) {
-        cpu_exit(env);
-    }
-    if (next_cpu && env != next_cpu) {
-        cpu_exit(next_cpu);
-    }
-    exit_request = 1;
-}
-
-void qemu_mutex_lock_iothread(void) {}
-void qemu_mutex_unlock_iothread(void) {}
-
-void cpu_stop_current(void)
-{
-}
-
-void vm_stop(int reason)
-{
-    do_vm_stop(reason);
-}
-
-#else /* CONFIG_IOTHREAD */
-
 QemuMutex qemu_global_mutex;
 static QemuCond qemu_io_proceeded_cond;
 static bool iothread_requesting_mutex;
@@ -1028,8 +892,6 @@ void vm_stop(int reason)
     do_vm_stop(reason);
 }
 
-#endif
-
 static int tcg_cpu_exec(CPUState *env)
 {
     int ret;
@@ -1084,11 +946,6 @@ bool cpu_exec_all(void)
         qemu_clock_enable(vm_clock,
                           (env->singlestep_enabled & SSTEP_NOTIMER) == 0);
 
-#ifndef CONFIG_IOTHREAD
-        if (qemu_alarm_pending()) {
-            break;
-        }
-#endif
         if (cpu_can_run(env)) {
             if (kvm_enabled()) {
                 r = kvm_cpu_exec(env);
diff --git a/hw/qxl.c b/hw/qxl.c
index 1d9077db6..45e24016f 100644
--- a/hw/qxl.c
+++ b/hw/qxl.c
@@ -1388,11 +1388,7 @@ static void init_pipe_signaling(PCIQXLDevice *d)
        dprint(d, 1, "%s: pipe creation failed\n", __FUNCTION__);
        return;
    }
-#ifdef CONFIG_IOTHREAD
    fcntl(d->pipe[0], F_SETFL, O_NONBLOCK);
-#else
-   fcntl(d->pipe[0], F_SETFL, O_NONBLOCK /* | O_ASYNC */);
-#endif
    fcntl(d->pipe[1], F_SETFL, O_NONBLOCK);
    fcntl(d->pipe[0], F_SETOWN, getpid());
 
diff --git a/kvm-all.c b/kvm-all.c
index 0ae2e2697..fbb9ff3be 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -479,7 +479,7 @@ static int kvm_check_many_ioeventfds(void)
      * Older kernels have a 6 device limit on the KVM io bus.  Find out so we
      * can avoid creating too many ioeventfds.
      */
-#if defined(CONFIG_EVENTFD) && defined(CONFIG_IOTHREAD)
+#if defined(CONFIG_EVENTFD)
     int ioeventfds[7];
     int i, ret = 0;
     for (i = 0; i < ARRAY_SIZE(ioeventfds); i++) {
diff --git a/qemu-timer.c b/qemu-timer.c
index 19313d3b0..46dd483fd 100644
--- a/qemu-timer.c
+++ b/qemu-timer.c
@@ -101,22 +101,6 @@ static int64_t cpu_get_clock(void)
     }
 }
 
-#ifndef CONFIG_IOTHREAD
-static int64_t qemu_icount_delta(void)
-{
-    if (!use_icount) {
-        return 5000 * (int64_t) 1000000;
-    } else if (use_icount == 1) {
-        /* When not using an adaptive execution frequency
-           we tend to get badly out of sync with real time,
-           so just delay for a reasonable amount of time.  */
-        return 0;
-    } else {
-        return cpu_get_icount() - cpu_get_clock();
-    }
-}
-#endif
-
 /* enable cpu_get_ticks() */
 void cpu_enable_ticks(void)
 {
@@ -688,9 +672,7 @@ void configure_icount(const char *option)
     if (!option)
         return;
 
-#ifdef CONFIG_IOTHREAD
     vm_clock->warp_timer = qemu_new_timer_ns(rt_clock, icount_warp_rt, NULL);
-#endif
 
     if (strcmp(option, "auto") != 0) {
         icount_time_shift = strtol(option, NULL, 0);
@@ -1178,41 +1160,6 @@ void quit_timers(void)
 
 int qemu_calculate_timeout(void)
 {
-#ifndef CONFIG_IOTHREAD
-    int timeout;
-
-    if (!vm_running)
-        timeout = 5000;
-    else {
-     /* XXX: use timeout computed from timers */
-        int64_t add;
-        int64_t delta;
-        /* Advance virtual time to the next event.  */
-	delta = qemu_icount_delta();
-        if (delta > 0) {
-            /* If virtual time is ahead of real time then just
-               wait for IO.  */
-            timeout = (delta + 999999) / 1000000;
-        } else {
-            /* Wait for either IO to occur or the next
-               timer event.  */
-            add = qemu_next_icount_deadline();
-            /* We advance the timer before checking for IO.
-               Limit the amount we advance so that early IO
-               activity won't get the guest too far ahead.  */
-            if (add > 10000000)
-                add = 10000000;
-            delta += add;
-            qemu_icount += qemu_icount_round (add);
-            timeout = delta / 1000000;
-            if (timeout < 0)
-                timeout = 0;
-        }
-    }
-
-    return timeout;
-#else /* CONFIG_IOTHREAD */
     return 1000;
-#endif
 }
 
diff --git a/vl.c b/vl.c
index 60bce0cc7..7a6fbacee 100644
--- a/vl.c
+++ b/vl.c
@@ -1445,17 +1445,6 @@ int main_loop_wait(int nonblocking)
     return ret;
 }
 
-#ifndef CONFIG_IOTHREAD
-static int vm_request_pending(void)
-{
-    return powerdown_requested ||
-           reset_requested ||
-           shutdown_requested ||
-           debug_requested ||
-           vmstop_requested;
-}
-#endif
-
 qemu_irq qemu_system_powerdown;
 
 static void main_loop(void)
@@ -1470,14 +1459,7 @@ static void main_loop(void)
     qemu_main_loop_start();
 
     for (;;) {
-#ifdef CONFIG_IOTHREAD
         nonblocking = !kvm_enabled() && last_io > 0;
-#else
-        nonblocking = cpu_exec_all();
-        if (vm_request_pending()) {
-            nonblocking = true;
-        }
-#endif
 #ifdef CONFIG_PROFILER
         ti = profile_getclock();
 #endif