/*
 * Copyright 2010 Intel Corporation
 *   Jesse Barnes <jesse.barnes@intel.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 */

/*
 * This program is intended for testing of display functionality.  It should
 * allow for testing of
 *   - hotplug
 *   - mode setting
 *   - clone & twin modes
 *   - panel fitting
 *   - test patterns & pixel generators
 * Additional programs can test the detected outputs against VBT provided
 * device lists (both docked & undocked).
 *
 * TODO:
 * - pixel generator in transcoder
 * - test pattern reg in pipe
 * - test patterns on outputs (e.g. TV)
 * - handle hotplug (leaks crtcs, can't handle clones)
 * - allow mode force
 * - expose output specific controls
 *  - e.g. DDC-CI brightness
 *  - HDMI controls
 *  - panel brightness
 *  - DP commands (e.g. poweroff)
 * - verify outputs against VBT/physical connectors
 */
#include "config.h"

#include <assert.h>
#include <cairo.h>
#include <errno.h>
#include <math.h>
#include <stdint.h>
#include <unistd.h>
#include <sys/poll.h>
#include <sys/time.h>
#include <sys/mman.h>
#include <sys/ioctl.h>

#include "i915_drm.h"
#include "drmtest.h"
#include "testdisplay.h"

drmModeRes *resources;
int drm_fd, modes;
int dump_info = 0, test_all_modes =0, test_preferred_mode = 0, force_mode = 0,
	test_plane, enable_tiling;
int sleep_between_modes = 5;
uint32_t depth = 24, stride, bpp;

drmModeModeInfo force_timing;

int crtc_x, crtc_y, crtc_w, crtc_h, width, height;
unsigned int plane_fb_id;
unsigned int plane_crtc_id;
unsigned int plane_id;
int plane_width, plane_height;
static const uint32_t SPRITE_COLOR_KEY = 0x00aaaaaa;
uint32_t *fb_ptr;

#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))

struct type_name {
	int type;
	const char *name;
};

#define type_name_fn(res) \
static const char * res##_str(int type) {			\
	unsigned int i;					\
	for (i = 0; i < ARRAY_SIZE(res##_names); i++) { \
		if (res##_names[i].type == type)	\
			return res##_names[i].name;	\
	}						\
	return "(invalid)";				\
}

struct type_name encoder_type_names[] = {
	{ DRM_MODE_ENCODER_NONE, "none" },
	{ DRM_MODE_ENCODER_DAC, "DAC" },
	{ DRM_MODE_ENCODER_TMDS, "TMDS" },
	{ DRM_MODE_ENCODER_LVDS, "LVDS" },
	{ DRM_MODE_ENCODER_TVDAC, "TVDAC" },
};

type_name_fn(encoder_type)

struct type_name connector_status_names[] = {
	{ DRM_MODE_CONNECTED, "connected" },
	{ DRM_MODE_DISCONNECTED, "disconnected" },
	{ DRM_MODE_UNKNOWNCONNECTION, "unknown" },
};

type_name_fn(connector_status)

struct type_name connector_type_names[] = {
	{ DRM_MODE_CONNECTOR_Unknown, "unknown" },
	{ DRM_MODE_CONNECTOR_VGA, "VGA" },
	{ DRM_MODE_CONNECTOR_DVII, "DVI-I" },
	{ DRM_MODE_CONNECTOR_DVID, "DVI-D" },
	{ DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
	{ DRM_MODE_CONNECTOR_Composite, "composite" },
	{ DRM_MODE_CONNECTOR_SVIDEO, "s-video" },
	{ DRM_MODE_CONNECTOR_LVDS, "LVDS" },
	{ DRM_MODE_CONNECTOR_Component, "component" },
	{ DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN" },
	{ DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort" },
	{ DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
	{ DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
	{ DRM_MODE_CONNECTOR_TV, "TV" },
	{ DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort" },
};

type_name_fn(connector_type)

/*
 * Mode setting with the kernel interfaces is a bit of a chore.
 * First you have to find the connector in question and make sure the
 * requested mode is available.
 * Then you need to find the encoder attached to that connector so you
 * can bind it with a free crtc.
 */
struct connector {
	uint32_t id;
	int mode_valid;
	drmModeModeInfo mode;
	drmModeEncoder *encoder;
	drmModeConnector *connector;
	int crtc;
	int pipe;
};

static void dump_connectors_fd(int drmfd)
{
	int i, j;

	drmModeRes *mode_resources = drmModeGetResources(drmfd);

	if (!mode_resources) {
		fprintf(stderr, "drmModeGetResources failed: %s\n",
			strerror(errno));
		return;
	}

	printf("Connectors:\n");
	printf("id\tencoder\tstatus\t\ttype\tsize (mm)\tmodes\n");
	for (i = 0; i < mode_resources->count_connectors; i++) {
		drmModeConnector *connector;

		connector = drmModeGetConnector(drmfd, mode_resources->connectors[i]);
		if (!connector) {
			fprintf(stderr, "could not get connector %i: %s\n",
				mode_resources->connectors[i], strerror(errno));
			continue;
		}

		printf("%d\t%d\t%s\t%s\t%dx%d\t\t%d\n",
		       connector->connector_id,
		       connector->encoder_id,
		       connector_status_str(connector->connection),
		       connector_type_str(connector->connector_type),
		       connector->mmWidth, connector->mmHeight,
		       connector->count_modes);

		if (!connector->count_modes)
			continue;

		printf("  modes:\n");
		printf("  name refresh (Hz) hdisp hss hse htot vdisp "
		       "vss vse vtot flags type clock\n");
		for (j = 0; j < connector->count_modes; j++)
			kmstest_dump_mode(&connector->modes[j]);

		drmModeFreeConnector(connector);
	}
	printf("\n");

	drmModeFreeResources(mode_resources);
}

static void dump_crtcs_fd(int drmfd)
{
	int i;
	drmModeRes *mode_resources = drmModeGetResources(drmfd);

	printf("CRTCs:\n");
	printf("id\tfb\tpos\tsize\n");
	for (i = 0; i < mode_resources->count_crtcs; i++) {
		drmModeCrtc *crtc;

		crtc = drmModeGetCrtc(drmfd, mode_resources->crtcs[i]);
		if (!crtc) {
			fprintf(stderr, "could not get crtc %i: %s\n",
				mode_resources->crtcs[i], strerror(errno));
			continue;
		}
		printf("%d\t%d\t(%d,%d)\t(%dx%d)\n",
		       crtc->crtc_id,
		       crtc->buffer_id,
		       crtc->x, crtc->y,
		       crtc->width, crtc->height);
		kmstest_dump_mode(&crtc->mode);

		drmModeFreeCrtc(crtc);
	}
	printf("\n");

	drmModeFreeResources(mode_resources);
}

static void connector_find_preferred_mode(struct connector *c)
{
	drmModeConnector *connector;
	drmModeEncoder *encoder = NULL;
	int i, j;

	/* First, find the connector & mode */
	c->mode_valid = 0;
	connector = drmModeGetConnector(drm_fd, c->id);
	if (!connector) {
		fprintf(stderr, "could not get connector %d: %s\n",
			c->id, strerror(errno));
		drmModeFreeConnector(connector);
		return;
	}

	if (connector->connection != DRM_MODE_CONNECTED) {
		drmModeFreeConnector(connector);
		return;
	}

	if (!connector->count_modes) {
		fprintf(stderr, "connector %d has no modes\n", c->id);
		drmModeFreeConnector(connector);
		return;
	}

	if (connector->connector_id != c->id) {
		fprintf(stderr, "connector id doesn't match (%d != %d)\n",
			connector->connector_id, c->id);
		drmModeFreeConnector(connector);
		return;
	}

	for (j = 0; j < connector->count_modes; j++) {
		c->mode = connector->modes[j];
		if (c->mode.type & DRM_MODE_TYPE_PREFERRED) {
			c->mode_valid = 1;
			break;
		}
	}

	if (!c->mode_valid) {
		if (connector->count_modes > 0) {
			/* use the first mode as test mode */
			c->mode = connector->modes[0];
			c->mode_valid = 1;
		}
		else {
			fprintf(stderr, "failed to find any modes on connector %d\n",
				c->id);
			return;
		}
	}

	/* Now get the encoder */
	for (i = 0; i < connector->count_encoders; i++) {
		encoder = drmModeGetEncoder(drm_fd, connector->encoders[i]);

		if (!encoder) {
			fprintf(stderr, "could not get encoder %i: %s\n",
				resources->encoders[i], strerror(errno));
			drmModeFreeEncoder(encoder);
			continue;
		}

		break;
	}

	c->encoder = encoder;

	if (i == resources->count_encoders) {
		fprintf(stderr, "failed to find encoder\n");
		c->mode_valid = 0;
		return;
	}

	/* Find first CRTC not in use */
	for (i = 0; i < resources->count_crtcs; i++) {
		if (resources->crtcs[i] && (c->encoder->possible_crtcs & (1<<i)))
			break;
	}
	c->crtc = resources->crtcs[i];
	c->pipe = i;

	if(test_preferred_mode || force_mode)
		resources->crtcs[i] = 0;

	c->connector = connector;
}

static void
paint_color_key(void)
{
	int i, j;

	for (i = crtc_y; i < crtc_y + crtc_h; i++)
		for (j = crtc_x; j < crtc_x + crtc_w; j++) {
			uint32_t offset;

			offset = (i * width) + j;
			fb_ptr[offset] = SPRITE_COLOR_KEY;
		}
}

static void
paint_output_info(cairo_t *cr, int l_width, int l_height, void *priv)
{
	struct connector *c = priv;
	cairo_text_extents_t name_extents, mode_extents;
	char name_buf[128], mode_buf[128];
	int i, x, y, modes_x, modes_y;

	/* Get text extents for each string */
	snprintf(name_buf, sizeof name_buf, "%s",
		 connector_type_str(c->connector->connector_type));
	cairo_set_font_size(cr, 48);
	cairo_select_font_face(cr, "Helvetica",
			       CAIRO_FONT_SLANT_NORMAL,
			       CAIRO_FONT_WEIGHT_NORMAL);
	cairo_text_extents(cr, name_buf, &name_extents);

	snprintf(mode_buf, sizeof mode_buf, "%s @ %dHz on %s encoder",
		 c->mode.name, c->mode.vrefresh,
		 encoder_type_str(c->encoder->encoder_type));
	cairo_set_font_size(cr, 36);
	cairo_text_extents(cr, mode_buf, &mode_extents);

	/* Paint output name */
	x = l_width / 2;
	x -= name_extents.width / 2;
	y = l_height / 2;
	y -= (name_extents.height / 2) - (mode_extents.height / 2) - 10;
	cairo_set_font_size(cr, 48);
	cairo_move_to(cr, x, y);
	cairo_text_path(cr, name_buf);
	cairo_set_source_rgb(cr, 0, 0, 0);
	cairo_stroke_preserve(cr);
	cairo_set_source_rgb(cr, 1, 1, 1);
	cairo_fill(cr);

	/* Paint mode name */
	x = l_width / 2;
	x -= mode_extents.width / 2;
	modes_x = x;
	y = l_height / 2;
	y += (mode_extents.height / 2) + (name_extents.height / 2) + 10;
	cairo_set_font_size(cr, 36);
	cairo_move_to(cr, x, y);
	cairo_text_path(cr, mode_buf);
	cairo_set_source_rgb(cr, 0, 0, 0);
	cairo_stroke_preserve(cr);
	cairo_set_source_rgb(cr, 1, 1, 1);
	cairo_fill(cr);

	/* List available modes */
	snprintf(mode_buf, sizeof mode_buf, "Available modes:");
	cairo_set_font_size(cr, 18);
	cairo_text_extents(cr, mode_buf, &mode_extents);
	x = modes_x;
	modes_x = x + mode_extents.width;
	y += mode_extents.height + 10;
	modes_y = y;
	cairo_move_to(cr, x, y);
	cairo_text_path(cr, mode_buf);
	cairo_set_source_rgb(cr, 0, 0, 0);
	cairo_stroke_preserve(cr);
	cairo_set_source_rgb(cr, 1, 1, 1);
	cairo_fill(cr);

	for (i = 0; i < c->connector->count_modes; i++) {
		snprintf(mode_buf, sizeof mode_buf, "%s @ %dHz",
			 c->connector->modes[i].name,
			 c->connector->modes[i].vrefresh);
		cairo_set_font_size(cr, 18);
		cairo_text_extents(cr, mode_buf, &mode_extents);
		x = modes_x - mode_extents.width; /* right justify modes */
		y += mode_extents.height + 10;
		if (y + mode_extents.height >= height) {
			y = modes_y + mode_extents.height + 10;
			modes_x += mode_extents.width + 10;
			x = modes_x - mode_extents.width;
		}
		cairo_move_to(cr, x, y);
		cairo_text_path(cr, mode_buf);
		cairo_set_source_rgb(cr, 0, 0, 0);
		cairo_stroke_preserve(cr);
		cairo_set_source_rgb(cr, 1, 1, 1);
		cairo_fill(cr);
	}
}

static void
set_mode(struct connector *c)
{
	unsigned int fb_id = 0;
	int j, test_mode_num;

	if (depth <= 8)
		bpp = 8;
	else if (depth > 8 && depth <= 16)
		bpp = 16;
	else if (depth > 16 && depth <= 32)
		bpp = 32;

	connector_find_preferred_mode(c);
	if (!c->mode_valid)
		return;

	test_mode_num = 1;
	if (force_mode){
		memcpy( &c->mode, &force_timing, sizeof(force_timing));
		c->mode.vrefresh =(force_timing.clock*1e3)/(force_timing.htotal*force_timing.vtotal);
		c->mode_valid = 1;
		sprintf(c->mode.name, "%dx%d", force_timing.hdisplay, force_timing.vdisplay);
	} else if (test_all_modes)
		test_mode_num = c->connector->count_modes;

	for (j = 0; j < test_mode_num; j++) {
		struct kmstest_fb fb_info;

		if (test_all_modes)
			c->mode = c->connector->modes[j];

		if (!c->mode_valid)
			continue;

		width = c->mode.hdisplay;
		height = c->mode.vdisplay;

		fb_id = kmstest_create_fb(drm_fd, width, height, bpp, depth,
					  enable_tiling, &fb_info,
					  paint_output_info, c);

		fb_ptr = gem_mmap(drm_fd, fb_info.gem_handle,
				  fb_info.size, PROT_READ | PROT_WRITE);
		assert(fb_ptr);
		paint_color_key();

		gem_close(drm_fd, fb_info.gem_handle);

		fprintf(stdout, "CRTS(%u):",c->crtc);
		kmstest_dump_mode(&c->mode);
		if (drmModeSetCrtc(drm_fd, c->crtc, fb_id, 0, 0,
				   &c->id, 1, &c->mode)) {
			fprintf(stderr, "failed to set mode (%dx%d@%dHz): %s\n",
				width, height, c->mode.vrefresh,
				strerror(errno));
			continue;
		}

		if (sleep_between_modes && test_all_modes)
			sleep(sleep_between_modes);

	}

	if(test_all_modes){
		drmModeRmFB(drm_fd,fb_id);
		drmModeSetCrtc(drm_fd, c->crtc, fb_id, 0, 0,  &c->id, 1, 0);
	}

	drmModeFreeEncoder(c->encoder);
	drmModeFreeConnector(c->connector);
}

/*
 * Re-probe outputs and light up as many as possible.
 *
 * On Intel, we have two CRTCs that we can drive independently with
 * different timings and scanout buffers.
 *
 * Each connector has a corresponding encoder, except in the SDVO case
 * where an encoder may have multiple connectors.
 */
int update_display(void)
{
	struct connector *connectors;
	int c;

	resources = drmModeGetResources(drm_fd);
	if (!resources) {
		fprintf(stderr, "drmModeGetResources failed: %s\n",
			strerror(errno));
		return 0;
	}

	connectors = calloc(resources->count_connectors,
			    sizeof(struct connector));
	if (!connectors)
		return 0;

	if (dump_info) {
		dump_connectors_fd(drm_fd);
		dump_crtcs_fd(drm_fd);
	}

	if (test_preferred_mode || test_all_modes || force_mode) {
		/* Find any connected displays */
		for (c = 0; c < resources->count_connectors; c++) {
			connectors[c].id = resources->connectors[c];
			set_mode(&connectors[c]);
		}
	}
	drmModeFreeResources(resources);
	return 1;
}

static char optstr[] = "hiaf:s:d:p:mt";

static void usage(char *name)
{
	fprintf(stderr, "usage: %s [-hiasdpmtf]\n", name);
	fprintf(stderr, "\t-i\tdump info\n");
	fprintf(stderr, "\t-a\ttest all modes\n");
	fprintf(stderr, "\t-s\t<duration>\tsleep between each mode test\n");
	fprintf(stderr, "\t-d\t<depth>\tbit depth of scanout buffer\n");
	fprintf(stderr, "\t-p\t<planew,h>,<crtcx,y>,<crtcw,h> test overlay plane\n");
	fprintf(stderr, "\t-m\ttest the preferred mode\n");
	fprintf(stderr, "\t-t\tuse a tiled framebuffer\n");
	fprintf(stderr, "\t-f\t<clock MHz>,<hdisp>,<hsync-start>,<hsync-end>,<htotal>,\n");
	fprintf(stderr, "\t\t<vdisp>,<vsync-start>,<vsync-end>,<vtotal>\n");
	fprintf(stderr, "\t\ttest force mode\n");
	fprintf(stderr, "\tDefault is to test all modes.\n");
	exit(0);
}

#define dump_resource(res) if (res) dump_##res()

static gboolean input_event(GIOChannel *source, GIOCondition condition,
			    gpointer data)
{
	gchar buf[2];
	gsize count;

	count = read(g_io_channel_unix_get_fd(source), buf, sizeof(buf));
	if (buf[0] == 'q' && (count == 1 || buf[1] == '\n')) {
		exit(0);
	}

	return TRUE;
}

int main(int argc, char **argv)
{
	int c;
	int ret = 0;
	GIOChannel *stdinchannel;
	GMainLoop *mainloop;
	float force_clock;

	opterr = 0;
	while ((c = getopt(argc, argv, optstr)) != -1) {
		switch (c) {
		case 'i':
			dump_info = 1;
			break;
		case 'a':
			test_all_modes = 1;
			break;
		case 'f':
			force_mode = 1;
			if(sscanf(optarg,"%f,%hu,%hu,%hu,%hu,%hu,%hu,%hu,%hu",
				&force_clock,&force_timing.hdisplay, &force_timing.hsync_start,&force_timing.hsync_end,&force_timing.htotal,
				&force_timing.vdisplay, &force_timing.vsync_start, &force_timing.vsync_end, &force_timing.vtotal)!= 9)
				usage(argv[0]);
			force_timing.clock = force_clock*1000;

			break;
		case 's':
			sleep_between_modes = atoi(optarg);
			break;
		case 'd':
			depth = atoi(optarg);
			fprintf(stderr, "using depth %d\n", depth);
			break;
		case 'p':
			if (sscanf(optarg, "%d,%d,%d,%d,%d,%d", &plane_width,
				   &plane_height, &crtc_x, &crtc_y,
				   &crtc_w, &crtc_h) != 6)
				usage(argv[0]);
			test_plane = 1;
			break;
		case 'm':
			test_preferred_mode = 1;
			break;
		case 't':
			enable_tiling = 1;
			break;
		default:
			fprintf(stderr, "unknown option %c\n", c);
			/* fall through */
		case 'h':
			usage(argv[0]);
			break;
		}
	}
	if (!test_all_modes && !force_mode && !dump_info &&
	    !test_preferred_mode)
		test_all_modes = 1;

	drm_fd = drm_open_any();

	mainloop = g_main_loop_new(NULL, FALSE);
	if (!mainloop) {
		fprintf(stderr, "failed to create glib mainloop\n");
		ret = -1;
		goto out_close;
	}

	if (!testdisplay_setup_hotplug()) {
		fprintf(stderr, "failed to initialize hotplug support\n");
		goto out_mainloop;
	}

	stdinchannel = g_io_channel_unix_new(0);
	if (!stdinchannel) {
		fprintf(stderr, "failed to create stdin GIO channel\n");
		goto out_hotplug;
	}

	ret = g_io_add_watch(stdinchannel, G_IO_IN | G_IO_ERR, input_event,
			     NULL);
	if (ret < 0) {
		fprintf(stderr, "failed to add watch on stdin GIO channel\n");
		goto out_stdio;
	}

	ret = 0;

	if (!update_display()) {
		ret = 1;
		goto out_stdio;
	}

	if (dump_info || test_all_modes)
		goto out_stdio;

	g_main_loop_run(mainloop);

out_stdio:
	g_io_channel_shutdown(stdinchannel, TRUE, NULL);
out_hotplug:
	testdisplay_cleanup_hotplug();
out_mainloop:
	g_main_loop_unref(mainloop);
out_close:
	close(drm_fd);

	return ret;
}