summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-01-05 10:32:16 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-01-05 10:32:16 -0800
commitb40079273279999d0a259e78d9ecb53ad82d042f (patch)
tree62e15c30dc3787493f9bce847cda7eae99aae781 /arch
parent383378d115ab6e702d77896071d36056875602db (diff)
parent1b9ec81258827001c869f003e0b8dd2ddc104717 (diff)
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann: "This is a rather large set of bugfixes, as we just returned from the Christmas break. Most of these are relatively unimportant fixes for regressions introduced during the merge window, and about half of the changes are for mach-omap2. A couple of patches are just cleanups and dead code removal that I would not normally have considered for merging after -rc2, but I decided to take them along with the fixes this time. Notable fixes include: - removing the skeleton.dtsi include broke a number of machines, and we have to put empty /chosen nodes back to be able to pass kernel command lines as before - enabling Samsung platforms no longer hardwires CONFIG_HZ to 200, as it had been for no good reason for a long time" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code drivers: psci: annotate timer on stack to silence odebug messages ARM64: defconfig: enable DRM_MESON as module ARM64: dts: meson-gx: Add Graphic Controller nodes ARM64: dts: meson-gxl: fix GPIO include ARM: dts: imx6: Disable "weim" node in the dtsi files ARM: dts: qcom: apq8064: Add missing scm clock ARM: davinci: da8xx: Fix sleeping function called from invalid context ARM: davinci: Make __clk_{enable,disable} functions public ARM: davinci: da850: don't add emac clock to lookup table twice ARM: davinci: da850: fix infinite loop in clk_set_rate() ARM: i.MX: remove map_io callback ARM: dts: vf610-zii-dev-rev-b: Add missing newline ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry ARM: dts: imx31: fix AVIC base address ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn arm64: dts: vexpress: Support GICC_DIR operations ARM: dts: vexpress: Support GICC_DIR operations firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares arm64: dts: msm8996: Add required memory carveouts ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig3
-rw-r--r--arch/arm/boot/dts/Makefile1
-rw-r--r--arch/arm/boot/dts/am335x-bone-common.dtsi8
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi1
-rw-r--r--arch/arm/boot/dts/am4372.dtsi1
-rw-r--r--arch/arm/boot/dts/am571x-idk.dts10
-rw-r--r--arch/arm/boot/dts/am572x-idk.dts14
-rw-r--r--arch/arm/boot/dts/am57xx-idk-common.dtsi9
-rw-r--r--arch/arm/boot/dts/dm814x.dtsi1
-rw-r--r--arch/arm/boot/dts/dm816x.dtsi1
-rw-r--r--arch/arm/boot/dts/dra7.dtsi1
-rw-r--r--arch/arm/boot/dts/dra72-evm-tps65917.dtsi16
-rw-r--r--arch/arm/boot/dts/imx31.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi1
-rw-r--r--arch/arm/boot/dts/omap2.dtsi1
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts2
-rw-r--r--arch/arm/boot/dts/omap3.dtsi1
-rw-r--r--arch/arm/boot/dts/omap4.dtsi1
-rw-r--r--arch/arm/boot/dts/omap5.dtsi1
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi4
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts2
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts2
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev-rev-b.dts3
-rw-r--r--arch/arm/mach-davinci/clock.c12
-rw-r--r--arch/arm/mach-davinci/clock.h2
-rw-r--r--arch/arm/mach-davinci/da850.c32
-rw-r--r--arch/arm/mach-davinci/usb-da8xx.c34
-rw-r--r--arch/arm/mach-exynos/platsmp.c31
-rw-r--r--arch/arm/mach-imx/mach-imx1.c1
-rw-r--r--arch/arm/mach-omap2/Makefile2
-rw-r--r--arch/arm/mach-omap2/board-generic.c2
-rw-r--r--arch/arm/mach-omap2/gpio.c160
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c8
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_common_data.h4
-rw-r--r--arch/arm/mach-omap2/prm_common.c4
-rw-r--r--arch/arm/mach-omap2/timer.c9
-rw-r--r--arch/arm/mach-s3c24xx/common.c76
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx.dtsi16
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts16
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi16
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi4
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts16
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl.dtsi6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts16
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm.dtsi4
-rw-r--r--arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi10
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts2
-rw-r--r--arch/arm64/configs/defconfig1
52 files changed, 314 insertions, 263 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5fab553fd03a..186c4c214e0a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1502,8 +1502,7 @@ source kernel/Kconfig.preempt
config HZ_FIXED
int
- default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
- ARCH_S5PV210 || ARCH_EXYNOS4
+ default 200 if ARCH_EBSA110
default 128 if SOC_AT91RM9200
default 0
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cccdbcb557b6..7327250f0bb6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -501,6 +501,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
logicpd-torpedo-37xx-devkit.dtb \
+ logicpd-som-lv-37xx-devkit.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-beagle-xm.dtb \
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index dc561d505bbe..3e32dd18fd25 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -6,8 +6,6 @@
* published by the Free Software Foundation.
*/
-#include <dt-bindings/mfd/tps65217.h>
-
/ {
cpus {
cpu@0 {
@@ -319,13 +317,13 @@
ti,pmic-shutdown-controller;
charger {
- interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>;
- interrupts-names = "AC", "USB";
+ interrupts = <0>, <1>;
+ interrupt-names = "USB", "AC";
status = "okay";
};
pwrbutton {
- interrupts = <TPS65217_IRQ_PB>;
+ interrupts = <2>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 64c8aa9057a3..18d72a245e88 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -16,6 +16,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c0;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ac55f93fc91e..2df9e6050c2f 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -16,6 +16,7 @@
interrupt-parent = <&wakeupgen>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
memory@0 {
device_type = "memory";
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index d6e43e5184c1..ad68d1eb3bc3 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -62,11 +62,6 @@
linux,default-trigger = "mmc0";
};
};
-
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
- };
};
&mmc1 {
@@ -79,3 +74,8 @@
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
+
+&extcon_usb2 {
+ id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 27d9149cedba..8350b4b34b08 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -23,11 +23,6 @@
reg = <0x0 0x80000000 0x0 0x80000000>;
};
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- };
-
status-leds {
compatible = "gpio-leds";
cpu0-led {
@@ -76,6 +71,11 @@
extcon = <&extcon_usb2>;
};
+&extcon_usb2 {
+ id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
&mmc1 {
status = "okay";
vmmc-supply = <&v3_3d>;
@@ -87,3 +87,7 @@
&sn65hvs882 {
load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
};
+
+&pcie1 {
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 555ae21f2b9a..814a720d5c3d 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -303,6 +303,13 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ extcon_usb2: tps659038_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ /* ID & VBUS GPIOs provided in board dts */
+ };
};
};
@@ -369,7 +376,7 @@
};
&usb2 {
- dr_mode = "otg";
+ dr_mode = "peripheral";
};
&mmc2 {
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 1facc5f12cef..81b8cecb5820 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -12,6 +12,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 61dd2f6b02bc..6db652ae9bd5 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -12,6 +12,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index addb7530cfbe..1faf24acd521 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -18,6 +18,7 @@
compatible = "ti,dra7xx";
interrupt-parent = <&crossbar_mpu>;
+ chosen { };
aliases {
i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
index ee6dac44edf1..e6df676886c0 100644
--- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
@@ -132,3 +132,19 @@
ti,palmas-long-press-seconds = <6>;
};
};
+
+&usb2_phy1 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+ vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+ vmmc_aux-supply = <&ldo1_reg>;
+};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 685916e3d8a1..85cd8be22f71 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -31,11 +31,11 @@
};
};
- avic: avic-interrupt-controller@60000000 {
+ avic: interrupt-controller@68000000 {
compatible = "fsl,imx31-avic", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
- reg = <0x60000000 0x100000>;
+ reg = <0x68000000 0x100000>;
};
soc {
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index e476d01959ea..26d060484728 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -533,7 +533,6 @@
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 53e6e63cbb02..89b834f3fa17 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1100,6 +1100,7 @@
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
};
ocotp: ocotp@021bc000 {
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 4fd6de29f07d..19cbd879c448 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -900,6 +900,7 @@
reg = <0x021b8000 0x4000>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
};
ocotp: ocotp@021bc000 {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 076a30f9bcae..10f333016197 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -977,6 +977,7 @@
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
};
ocotp: ocotp@021bc000 {
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 4f793a025a72..f1d6de8b3c19 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -17,6 +17,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
serial0 = &uart1;
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 87ca50b53002..4d448f145ed1 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -734,6 +734,8 @@
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
non-removable;
+ no-sdio;
+ no-sd;
};
&mmc3 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index ecf5eb584c75..a3ff4933dbc1 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -17,6 +17,7 @@
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 8087456b5fbe..578c53f08309 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -15,6 +15,7 @@
interrupt-parent = <&wakeupgen>;
#address-cells = <1>;
#size-cells = <1>;
+ chosen { };
aliases {
i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 968c67a49dbd..7cd92babc41a 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -17,6 +17,7 @@
compatible = "ti,omap5";
interrupt-parent = <&wakeupgen>;
+ chosen { };
aliases {
i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 268bd470c865..407a4610f4a7 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -303,6 +304,9 @@
firmware {
scm {
compatible = "qcom,scm-apq8064";
+
+ clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+ clock-names = "core";
};
};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 102838fcc588..15f4fd3f4695 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -81,7 +81,7 @@
#address-cells = <0>;
interrupt-controller;
reg = <0 0x2c001000 0 0x1000>,
- <0 0x2c002000 0 0x1000>,
+ <0 0x2c002000 0 0x2000>,
<0 0x2c004000 0 0x2000>,
<0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 45d08cc37b01..bd107c5a0226 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -131,7 +131,7 @@
#address-cells = <0>;
interrupt-controller;
reg = <0 0x2c001000 0 0x1000>,
- <0 0x2c002000 0 0x1000>,
+ <0 0x2c002000 0 0x2000>,
<0 0x2c004000 0 0x2000>,
<0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 7ea617e47fe4..958b4c42d320 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -153,7 +153,8 @@
switch0phy1: switch1phy0@1 {
reg = <1>;
interrupt-parent = <&switch0>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; };
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
switch0phy2: switch1phy0@2 {
reg = <2>;
interrupt-parent = <&switch0>;
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index df42c93a93d6..f5dce9b4e617 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -31,10 +31,10 @@ static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
-static void __clk_enable(struct clk *clk)
+void davinci_clk_enable(struct clk *clk)
{
if (clk->parent)
- __clk_enable(clk->parent);
+ davinci_clk_enable(clk->parent);
if (clk->usecount++ == 0) {
if (clk->flags & CLK_PSC)
davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
@@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk)
}
}
-static void __clk_disable(struct clk *clk)
+void davinci_clk_disable(struct clk *clk)
{
if (WARN_ON(clk->usecount == 0))
return;
@@ -56,7 +56,7 @@ static void __clk_disable(struct clk *clk)
clk->clk_disable(clk);
}
if (clk->parent)
- __clk_disable(clk->parent);
+ davinci_clk_disable(clk->parent);
}
int davinci_clk_reset(struct clk *clk, bool reset)
@@ -103,7 +103,7 @@ int clk_enable(struct clk *clk)
return -EINVAL;
spin_lock_irqsave(&clockfw_lock, flags);
- __clk_enable(clk);
+ davinci_clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return 0;
@@ -118,7 +118,7 @@ void clk_disable(struct clk *clk)
return;
spin_lock_irqsave(&clockfw_lock, flags);
- __clk_disable(clk);
+ davinci_clk_disable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index e2a5437a1aee..fa2b83752e03 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -132,6 +132,8 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
int davinci_set_refclk_rate(unsigned long rate);
int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
int davinci_clk_reset(struct clk *clk, bool reset);
+void davinci_clk_enable(struct clk *clk);
+void davinci_clk_disable(struct clk *clk);
extern struct platform_device davinci_wdt_device;
extern void davinci_watchdog_reset(struct platform_device *);
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index e770c97ea45c..1d873d15b545 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -319,6 +319,16 @@ static struct clk emac_clk = {
.gpsc = 1,
};
+/*
+ * In order to avoid adding the emac_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * mdio inheriting the rate from emac_clk.
+ */
+static struct clk mdio_clk = {
+ .name = "mdio",
+ .parent = &emac_clk,
+};
+
static struct clk mcasp_clk = {
.name = "mcasp",
.parent = &async3_clk,
@@ -367,6 +377,16 @@ static struct clk aemif_clk = {
.flags = ALWAYS_ENABLED,
};
+/*
+ * In order to avoid adding the aemif_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * nand inheriting the rate from aemif_clk.
+ */
+static struct clk aemif_nand_clk = {
+ .name = "nand",
+ .parent = &aemif_clk,
+};
+
static struct clk usb11_clk = {
.name = "usb11",
.parent = &pll0_sysclk4,
@@ -529,7 +549,7 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "rmii", &rmii_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("davinci_mdio.0", "fck", &emac_clk),
+ CLK("davinci_mdio.0", "fck", &mdio_clk),
CLK("davinci-mcasp.0", NULL, &mcasp_clk),
CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk),
CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk),
@@ -537,7 +557,15 @@ static struct clk_lookup da850_clks[] = {
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK("ti-aemif", NULL, &aemif_clk),
- CLK(NULL, "aemif", &aemif_clk),
+ /*
+ * The only user of this clock is davinci_nand and it get's it through
+ * con_id. The nand node itself is created from within the aemif
+ * driver to guarantee that it's probed after the aemif timing
+ * parameters are configured. of_dev_auxdata is not accessible from
+ * the aemif driver and can't be passed to of_platform_populate(). For
+ * that reason we're leaving the dev_id here as NULL.
+ */
+ CLK(NULL, "aemif", &aemif_nand_clk),
CLK("ohci-da8xx", "usb11", &usb11_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index c6feecf7ae24..9a6af0bd5dc3 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -22,6 +22,8 @@
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
+static struct clk *usb20_clk;
+
static struct platform_device da8xx_usb_phy = {
.name = "da8xx-usb-phy",
.id = -1,
@@ -158,26 +160,13 @@ int __init da8xx_register_usb_refclkin(int rate)
static void usb20_phy_clk_enable(struct clk *clk)
{
- struct clk *usb20_clk;
- int err;
u32 val;
u32 timeout = 500000; /* 500 msec */
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
- usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
- if (IS_ERR(usb20_clk)) {
- pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk));
- return;
- }
-
/* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
- err = clk_prepare_enable(usb20_clk);
- if (err) {
- pr_err("failed to enable usb20 clk: %d\n", err);
- clk_put(usb20_clk);
- return;
- }
+ davinci_clk_enable(usb20_clk);
/*
* Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
@@ -197,8 +186,7 @@ static void usb20_phy_clk_enable(struct clk *clk)
pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
done:
- clk_disable_unprepare(usb20_clk);
- clk_put(usb20_clk);
+ davinci_clk_disable(usb20_clk);
}
static void usb20_phy_clk_disable(struct clk *clk)
@@ -285,11 +273,19 @@ static struct clk_lookup usb20_phy_clk_lookup =
int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin)
{
struct clk *parent;
- int ret = 0;
+ int ret;
+
+ usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
+ ret = PTR_ERR_OR_ZERO(usb20_clk);
+ if (ret)
+ return ret;
parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux");
- if (IS_ERR(parent))
- return PTR_ERR(parent);
+ ret = PTR_ERR_OR_ZERO(parent);
+ if (ret) {
+ clk_put(usb20_clk);
+ return ret;
+ }
usb20_phy_clk.parent = parent;
ret = clk_register(&usb20_phy_clk);
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 98ffe1e62ad5..a5d68411a037 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -385,36 +385,6 @@ fail:
return pen_release != -1 ? ret : 0;
}
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-
-static void __init exynos_smp_init_cpus(void)
-{
- void __iomem *scu_base = scu_base_addr();
- unsigned int i, ncores;
-
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
- ncores = scu_base ? scu_get_core_count(scu_base) : 1;
- else
- /*
- * CPU Nodes are passed thru DT and set_cpu_possible
- * is set by "arm_dt_init_cpu_maps".
- */
- return;
-
- /* sanity check */
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-}
-
static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
@@ -479,7 +449,6 @@ static void exynos_cpu_die(unsigned int cpu)
#endif /* CONFIG_HOTPLUG_CPU */
const struct smp_operations exynos_smp_ops __initconst = {
- .smp_init_cpus = exynos_smp_init_cpus,
.smp_prepare_cpus = exynos_smp_prepare_cpus,
.smp_secondary_init = exynos_secondary_init,
.smp_boot_secondary = exynos_boot_secondary,
diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c
index de5ab8d88549..3a8406e45b65 100644
--- a/arch/arm/mach-imx/mach-imx1.c
+++ b/arch/arm/mach-imx/mach-imx1.c
@@ -37,7 +37,6 @@ static const char * const imx1_dt_board_compat[] __initconst = {
};
DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
- .map_io = debug_ll_io_init,
.init_early = imx1_init_early,
.init_irq = imx1_init_irq,
.dt_compat = imx1_dt_board_compat,
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 469894082fea..093458b62c8d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
# Common support
obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+ common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o omap-headsmp.o sram.o drm.o
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 36d9943205ca..dc9e34e670a2 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -304,7 +304,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
.init_late = am43xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
- .init_time = omap4_local_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.dt_compat = am43_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
deleted file mode 100644
index 7a577145b68b..000000000000
--- a/arch/arm/mach-omap2/gpio.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * OMAP2+ specific gpio initialization
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author:
- * Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/of.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-#include "omap-pm.h"
-
-#include "powerdomain.h"
-
-static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
-{
- struct platform_device *pdev;
- struct omap_gpio_platform_data *pdata;
- struct omap_gpio_dev_attr *dev_attr;
- char *name = "omap_gpio";
- int id;
- struct powerdomain *pwrdm;
-
- /*
- * extract the device id from name field available in the
- * hwmod database and use the same for constructing ids for
- * gpio devices.
- * CAUTION: Make sure the name in the hwmod database does
- * not change. If changed, make corresponding change here
- * or make use of static variable mechanism to handle this.
- */
- sscanf(oh->name, "gpio%d", &id);
-
- pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL);
- if (!pdata) {
- pr_err("gpio%d: Memory allocation failed\n", id);
- return -ENOMEM;
- }
-
- dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
- pdata->bank_width = dev_attr->bank_width;
- pdata->dbck_flag = dev_attr->dbck_flag;
- pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
- pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
- if (!pdata->regs) {
- pr_err("gpio%d: Memory allocation failed\n", id);
- kfree(pdata);
- return -ENOMEM;
- }
-
- switch (oh->class->rev) {
- case 0:
- if (id == 1)
- /* non-wakeup GPIO pins for OMAP2 Bank1 */
- pdata->non_wakeup_gpios = 0xe203ffc0;
- else if (id == 2)
- /* non-wakeup GPIO pins for OMAP2 Bank2 */
- pdata->non_wakeup_gpios = 0x08700040;
- /* fall through */
-
- case 1:
- pdata->regs->revision = OMAP24XX_GPIO_REVISION;
- pdata->regs->direction = OMAP24XX_GPIO_OE;
- pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
- pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
- pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
- pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
- pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
- pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
- pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
- pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2;
- pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
- pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
- pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
- pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
- pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
- pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN;
- pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
- pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
- pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
- pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
- break;
- case 2:
- pdata->regs->revision = OMAP4_GPIO_REVISION;
- pdata->regs->direction = OMAP4_GPIO_OE;
- pdata->regs->datain = OMAP4_GPIO_DATAIN;
- pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
- pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
- pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
- pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0;
- pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1;
- pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
- pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
- pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
- pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1;
- pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
- pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
- pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
- pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
- pdata->regs->ctrl = OMAP4_GPIO_CTRL;
- pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0;
- pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
- pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
- pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
- pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
- break;
- default:
- WARN(1, "Invalid gpio bank_type\n");
- kfree(pdata->regs);
- kfree(pdata);
- return -EINVAL;
- }
-
- pwrdm = omap_hwmod_get_pwrdm(oh);
- pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
-
- pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata));
- kfree(pdata);
-
- if (IS_ERR(pdev)) {
- WARN(1, "Can't build omap_device for %s:%s.\n",
- name, oh->name);
- return PTR_ERR(pdev);
- }
-
- return 0;
-}
-
-/*
- * gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence gpio_init is a omap_postcore_initcall.
- */
-static int __init omap2_gpio_init(void)
-{
- /* If dtb is there, the devices will be created dynamically */
- if (of_have_populated_dt())
- return -ENODEV;
-
- return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL);
-}
-omap_postcore_initcall(omap2_gpio_init);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 759e1d45ba25..e8b988714a09 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -741,14 +741,14 @@ static int _init_main_clk(struct omap_hwmod *oh)
int ret = 0;
char name[MOD_CLK_MAX_NAME_LEN];
struct clk *clk;
+ static const char modck[] = "_mod_ck";
- /* +7 magic comes from '_mod_ck' suffix */
- if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN)
+ if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck))
pr_warn("%s: warning: cropping name for %s\n", __func__,
oh->name);
- strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7);
- strcat(name, "_mod_ck");
+ strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck));
+ strlcat(name, modck, MOD_CLK_MAX_NAME_LEN);
clk = clk_get(NULL, name);
if (!IS_ERR(clk)) {
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index cdfbb44ceb0c..f22e9cb39f4a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -121,10 +121,6 @@ extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_dispc_irqs[];
extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio1_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio2_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio3_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio4_irqs[];
extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 5b2f5138d938..2b138b65129a 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -295,10 +295,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
GFP_KERNEL);
if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
- !prcm_irq_setup->priority_mask) {
- pr_err("PRCM: kzalloc failed\n");
+ !prcm_irq_setup->priority_mask)
goto err;
- }
memset(mask, 0, sizeof(mask));
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 56128da23c3a..07dd692c4737 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -510,18 +510,19 @@ void __init omap3_secure_sync32k_timer_init(void)
}
#endif /* CONFIG_ARCH_OMAP3 */
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
+ defined(CONFIG_SOC_AM43XX)
void __init omap3_gptimer_timer_init(void)
{
__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
1, "timer_sys_ck", "ti,timer-alwon", true);
-
- clocksource_probe();
+ if (of_have_populated_dt())
+ clocksource_probe();
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
- defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
+ defined(CONFIG_SOC_DRA7XX)
static void __init omap4_sync32k_timer_init(void)
{
__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index f6c3f151d0d4..b59f4f4f256f 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -345,10 +345,40 @@ static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
+static const struct dma_slave_map s3c2410_dma_slave_map[] = {
+ { "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX },
+ { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX },
+ { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX },
+ { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX },
+ /*
+ * The DMA request source[1] (DMACH_UARTx_SRC2) are
+ * not used in the UART driver.
+ */
+ { "s3c2410-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2410-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2410-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2410-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2410-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2410-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+ { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+ { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2410_dma_channels,
.num_channels = DMACH_MAX,
+ .slave_map = s3c2410_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map),
};
struct platform_device s3c2410_device_dma = {
@@ -388,10 +418,36 @@ static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
};
+static const struct dma_slave_map s3c2412_dma_slave_map[] = {
+ { "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX },
+ { "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX },
+ { "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX },
+ { "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX },
+ { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c2412-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT },
+ { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+ { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+ { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+ { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+ { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2412_dma_channels,
.num_channels = DMACH_MAX,
+ .slave_map = s3c2412_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map),
};
struct platform_device s3c2412_device_dma = {
@@ -534,10 +590,30 @@ static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
};
+static const struct dma_slave_map s3c2443_dma_slave_map[] = {
+ { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
+ { "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX },
+ { "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX },
+ { "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX },
+ { "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX },
+ { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+ { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+ { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+ { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
+ { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
+ { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+ { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+};
+
static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
.num_phy_channels = 6,
.channels = s3c2443_dma_channels,
.num_channels = DMACH_MAX,
+ .slave_map = s3c2443_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map),
};
struct platform_device s3c2443_device_dma = {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index fc033c0d2a0f..eada0b58ba1c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -356,5 +356,21 @@
status = "disabled";
};
};
+
+ vpu: vpu@d0100000 {
+ compatible = "amlogic,meson-gx-vpu";
+ reg = <0x0 0xd0100000 0x0 0x100000>,
+ <0x0 0xc883c000 0x0 0x1000>,
+ <0x0 0xc8838000 0x0 0x1000>;
+ reg-names = "vpu", "hhi", "dmc";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* CVBS VDAC output port */
+ cvbs_vdac_port: port@0 {
+ reg = <0>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 969682092e0f..4cbd626a9e88 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -142,6 +142,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
&uart_AO {
@@ -229,3 +239,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 203be28978d5..4a96e0f6f926 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -125,6 +125,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
@@ -234,3 +244,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 51edd5b5c460..596240c38a9c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -506,3 +506,7 @@
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
+
+&vpu {
+ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
index e99101ae9664..cea4a3eded9b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
@@ -117,6 +117,16 @@
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
&uart_AO {
@@ -203,3 +213,9 @@
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 9f89b99c4806..69216246275d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -43,7 +43,7 @@
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
-#include <dt-bindings/gpio/meson-gxbb-gpio.h>
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
/ {
compatible = "amlogic,meson-gxl";
@@ -299,3 +299,7 @@
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
+
+&vpu {
+ compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index f859d75db8bd..5a337d339df1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -90,6 +90,16 @@
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
};
/* This UART is brought out to the DB9 connector */
@@ -167,3 +177,9 @@
max-speed = <1000>;
};
};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index c1974bbbddea..eb2f0c3e5e53 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -112,3 +112,7 @@
};
};
};
+
+&vpu {
+ compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index a852e28a40e1..a83ed2c6bbf7 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -81,7 +81,7 @@
#address-cells = <0>;
interrupt-controller;
reg = <0x0 0x2c001000 0 0x1000>,
- <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c002000 0 0x2000>,
<0x0 0x2c004000 0 0x2000>,
<0x0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 9d1d7ad9b075..29ed6b61c737 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -64,6 +64,16 @@
reg = <0x0 0x86000000 0x0 0x200000>;
no-map;
};
+
+ memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x800000>;
+ no-map;
+ };
+
+ memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x2600000>;
+ no-map;
+ };
};
cpus {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 6ffb0517421a..dbea2c3d8f0c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -169,7 +169,7 @@
power-source = <3300>;
};
- sdhi0_pins_uhs: sd0 {
+ sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 869dded0f09f..33b744d54739 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -331,6 +331,7 @@ CONFIG_DRM_VC4=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MESON=m
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_BACKLIGHT_GENERIC=m