# Makefile.in generated by automake 1.10.1 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. pkgdatadir = $(datadir)/valgrind pkglibdir = $(libdir)/valgrind pkgincludedir = $(includedir)/valgrind am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-unknown-linux-gnu host_triplet = x86_64-unknown-linux-gnu DIST_COMMON = README $(am__configure_deps) $(dist_noinst_DATA) \ $(dist_val_DATA) $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/config.h.in $(srcdir)/glibc-2.X.supp.in \ $(srcdir)/valgrind.pc.in $(srcdir)/valgrind.spec.in \ $(top_srcdir)/Makefile.all.am $(top_srcdir)/configure \ $(top_srcdir)/drd/scripts/download-and-build-splash2.in \ $(top_srcdir)/fat/Makefile.in AUTHORS COPYING INSTALL NEWS \ compile config.guess config.sub depcomp install-sh missing #am__append_1 = valt_load_address_x86_linux.lds #am__append_2 = valt_load_address_x86_linux.lds am__append_3 = valt_load_address_amd64_linux.lds am__append_4 = valt_load_address_amd64_linux.lds #am__append_5 = valt_load_address_ppc32_linux.lds #am__append_6 = valt_load_address_ppc32_linux.lds #am__append_7 = valt_load_address_ppc64_linux.lds #am__append_8 = valt_load_address_ppc64_linux.lds subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = valgrind.spec valgrind.pc glibc-2.X.supp \ fat/Makefile drd/scripts/download-and-build-splash2 SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(valdir)" "$(DESTDIR)$(pkgconfigdir)" \ "$(DESTDIR)$(incincdir)" dist_valDATA_INSTALL = $(INSTALL_DATA) pkgconfigDATA_INSTALL = $(INSTALL_DATA) DATA = $(dist_noinst_DATA) $(dist_val_DATA) $(pkgconfig_DATA) nodist_incincHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(nodist_incinc_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = ${SHELL} /home/steph/compile/valgrind/missing --run aclocal-1.10 AMTAR = ${SHELL} /home/steph/compile/valgrind/missing --run tar AR = /usr/bin/ar AUTOCONF = ${SHELL} /home/steph/compile/valgrind/missing --run autoconf AUTOHEADER = ${SHELL} /home/steph/compile/valgrind/missing --run autoheader AUTOMAKE = ${SHELL} /home/steph/compile/valgrind/missing --run automake-1.10 AWK = gawk BOOST_CFLAGS = BOOST_LIBS = -lboost_thread-mt -m64 CC = gcc CCAS = gcc CCASDEPMODE = depmode=gcc3 CCASFLAGS = -Wno-long-long CCDEPMODE = depmode=gcc3 CFLAGS = -Wno-long-long -Wno-pointer-sign -Wdeclaration-after-statement -fno-stack-protector CPP = gcc -E CPPFLAGS = CXX = g++ CXXDEPMODE = depmode=gcc3 CXXFLAGS = -g -O2 CYGPATH_W = echo DEFAULT_SUPP = exp-ptrcheck.supp xfree-3.supp xfree-4.supp glibc-2.X-drd.supp glibc-2.34567-NPTL-helgrind.supp glibc-2.X.supp DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DIFF = diff -u DISTCHECK_CONFIGURE_FLAGS = --with-vex=$(top_srcdir)/VEX ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = FLAG_FNO_STACK_PROTECTOR = -fno-stack-protector FLAG_M32 = -m32 FLAG_M64 = -m64 FLAG_MAIX32 = FLAG_MAIX64 = FLAG_MMMX = -mmmx FLAG_MSSE = -msse FLAG_UNLIMITED_INLINE_UNIT_GROWTH = --param inline-unit-growth=900 FLAG_WDECL_AFTER_STMT = -Wdeclaration-after-statement FLAG_W_EXTRA = -Wextra FLAG_W_NO_FORMAT_ZERO_LENGTH = -Wno-format-zero-length GDB = /usr/bin/gdb GLIBC_VERSION = 2.8 GREP = /bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LDFLAGS = LIBOBJS = LIBS = LN_S = ln -s LTLIBOBJS = MAINT = # MAKEINFO = ${SHELL} /home/steph/compile/valgrind/missing --run makeinfo MKDIR_P = /bin/mkdir -p MPI_CC = mpicc OBJEXT = o PACKAGE = valgrind PACKAGE_BUGREPORT = valgrind-users@lists.sourceforge.net PACKAGE_NAME = Valgrind PACKAGE_STRING = Valgrind 3.5.0.SVN PACKAGE_TARNAME = valgrind PACKAGE_VERSION = 3.5.0.SVN PATH_SEPARATOR = : PERL = /usr/bin/perl PKG_CONFIG = /usr/bin/pkg-config PREFERRED_STACK_BOUNDARY = QTCORE_CFLAGS = -DQT_SHARED -I/usr/include/QtCore QTCORE_LIBS = -lQtCore RANLIB = ranlib SET_MAKE = SHELL = /bin/sh STRIP = VALT_LOAD_ADDRESS = 0x38000000 VERSION = 3.5.0.SVN VEX_DIR = $(top_srcdir)/VEX VGCONF_ARCH_PRI = amd64 VGCONF_OS = linux VGCONF_PLATFORM_PRI_CAPS = AMD64_LINUX VGCONF_PLATFORM_SEC_CAPS = abs_builddir = /home/steph/compile/valgrind abs_srcdir = /home/steph/compile/valgrind abs_top_builddir = /home/steph/compile/valgrind abs_top_srcdir = /home/steph/compile/valgrind ac_ct_CC = gcc ac_ct_CXX = g++ am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = x86_64-unknown-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = unknown builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-unknown-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = $(SHELL) /home/steph/compile/valgrind/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr/local program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc target_alias = top_builddir = . top_srcdir = . AUTOMAKE_OPTIONS = foreign 1.7 dist-bzip2 valdir = $(libdir)/valgrind inplacedir = $(top_builddir)/.in_place TOOLS = memcheck \ cachegrind \ callgrind \ fat \ massif \ lackey \ none \ helgrind \ drd EXP_TOOLS = exp-omega \ exp-ptrcheck # Put docs last because building the HTML is slow and we want to get # everything else working before we try it. SUBDIRS = include coregrind . tests perf auxprogs $(TOOLS) $(EXP_TOOLS) docs DIST_SUBDIRS = $(SUBDIRS) SUPP_FILES = \ glibc-2.2.supp glibc-2.3.supp glibc-2.4.supp glibc-2.5.supp \ glibc-2.6.supp glibc-2.7.supp glibc-2.X.supp.in \ aix5libc.supp xfree-3.supp xfree-4.supp \ glibc-2.34567-NPTL-helgrind.supp \ glibc-2.2-LinuxThreads-helgrind.supp \ glibc-2.X-drd.supp \ exp-ptrcheck.supp DEFAULT_SUPP_FILES = exp-ptrcheck.supp xfree-3.supp xfree-4.supp glibc-2.X-drd.supp glibc-2.34567-NPTL-helgrind.supp glibc-2.X.supp # We include all .supp files in the distribution, but only install # default.supp. dist_val_DATA = default.supp dist_noinst_DATA = $(SUPP_FILES) pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = valgrind.pc incincdir = $(includedir)/valgrind nodist_incinc_HEADERS = $(VEX_PUBLIC_HDRS) BUILT_SOURCES = default.supp valgrind.pc $(am__append_1) \ $(am__append_3) $(am__append_5) $(am__append_7) CLEANFILES = $(am__append_2) $(am__append_4) $(am__append_6) \ $(am__append_8) DISTCLEANFILES = default.supp # Nb: no need to include any Makefile.am files here, or files included from # them, as automake includes them automatically. EXTRA_DIST = \ ACKNOWLEDGEMENTS \ README_DEVELOPERS \ README_PACKAGERS \ README_MISSING_SYSCALL_OR_IOCTL \ valgrind.spec.in valgrind.pc.in \ $(vex_primary_sources) \ vg-in-place # These list the bits of vex we need to install VEX_PUBLIC_HDRS = \ $(top_srcdir)/VEX/pub/libvex_guest_amd64.h \ $(top_srcdir)/VEX/pub/libvex_ir.h \ $(top_srcdir)/VEX/pub/libvex_guest_ppc32.h \ $(top_srcdir)/VEX/pub/libvex_guest_ppc64.h \ $(top_srcdir)/VEX/pub/libvex_basictypes.h \ $(top_srcdir)/VEX/pub/libvex_guest_offsets.h \ $(top_srcdir)/VEX/pub/libvex_emwarn.h \ $(top_srcdir)/VEX/pub/libvex.h \ $(top_srcdir)/VEX/pub/libvex_trc_values.h \ $(top_srcdir)/VEX/pub/libvex_guest_arm.h \ $(top_srcdir)/VEX/pub/libvex_guest_x86.h # These list the bits of vex we need to copy into the tarball vex_primary_sources = \ VEX/quote.txt \ VEX/newline.txt \ VEX/HACKING.README \ VEX/LICENSE.README \ VEX/LICENSE.GPL \ VEX/Makefile \ VEX/auxprogs/genoffsets.c \ VEX/pub/libvex_guest_amd64.h \ VEX/pub/libvex_ir.h \ VEX/pub/libvex_guest_ppc32.h \ VEX/pub/libvex_guest_ppc64.h \ VEX/pub/libvex_basictypes.h \ VEX/pub/libvex_guest_offsets.h \ VEX/pub/libvex_emwarn.h \ VEX/pub/libvex.h \ VEX/pub/libvex_trc_values.h \ VEX/pub/libvex_guest_arm.h \ VEX/pub/libvex_guest_x86.h \ VEX/priv/ir/irmatch.c \ VEX/priv/ir/irmatch.h \ VEX/priv/ir/irdefs.c \ VEX/priv/ir/iropt.c \ VEX/priv/ir/iropt.h \ VEX/priv/host-ppc/isel.c \ VEX/priv/host-ppc/hdefs.c \ VEX/priv/host-ppc/hdefs.h \ VEX/priv/main/vex_svnversion.h \ VEX/priv/main/vex_globals.c \ VEX/priv/main/vex_globals.h \ VEX/priv/main/vex_main.c \ VEX/priv/main/vex_util.c \ VEX/priv/main/vex_util.h \ VEX/priv/guest-arm/ghelpers.c \ VEX/priv/guest-arm/gdefs.h \ VEX/priv/guest-arm/toIR.c \ VEX/priv/guest-x86/ghelpers.c \ VEX/priv/guest-x86/gdefs.h \ VEX/priv/guest-x86/toIR.c \ VEX/priv/guest-generic/g_generic_x87.c \ VEX/priv/guest-generic/g_generic_x87.h \ VEX/priv/guest-generic/bb_to_IR.c \ VEX/priv/guest-generic/bb_to_IR.h \ VEX/priv/host-arm/isel.c \ VEX/priv/host-arm/hdefs.c \ VEX/priv/host-arm/hdefs.h \ VEX/priv/host-x86/isel.c \ VEX/priv/host-x86/hdefs.c \ VEX/priv/host-x86/hdefs.h \ VEX/priv/guest-amd64/ghelpers.c \ VEX/priv/guest-amd64/gdefs.h \ VEX/priv/guest-amd64/toIR.c \ VEX/priv/guest-ppc/ghelpers.c \ VEX/priv/guest-ppc/gdefs.h \ VEX/priv/guest-ppc/toIR.c \ VEX/priv/host-generic/reg_alloc2.c \ VEX/priv/host-generic/h_generic_regs.c \ VEX/priv/host-generic/h_generic_regs.h \ VEX/priv/host-generic/h_generic_simd64.c \ VEX/priv/host-generic/h_generic_simd64.h \ VEX/priv/host-amd64/isel.c \ VEX/priv/host-amd64/hdefs.c \ VEX/priv/host-amd64/hdefs.h all: $(BUILT_SOURCES) config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/Makefile.all.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ cd $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: # $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: # $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 valgrind.spec: $(top_builddir)/config.status $(srcdir)/valgrind.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ valgrind.pc: $(top_builddir)/config.status $(srcdir)/valgrind.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ glibc-2.X.supp: $(top_builddir)/config.status $(srcdir)/glibc-2.X.supp.in cd $(top_builddir) && $(SHELL) ./config.status $@ fat/Makefile: $(top_builddir)/config.status $(top_srcdir)/fat/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ drd/scripts/download-and-build-splash2: $(top_builddir)/config.status $(top_srcdir)/drd/scripts/download-and-build-splash2.in cd $(top_builddir) && $(SHELL) ./config.status $@ install-dist_valDATA: $(dist_val_DATA) @$(NORMAL_INSTALL) test -z "$(valdir)" || $(MKDIR_P) "$(DESTDIR)$(valdir)" @list='$(dist_val_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(dist_valDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(valdir)/$$f'"; \ $(dist_valDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(valdir)/$$f"; \ done uninstall-dist_valDATA: @$(NORMAL_UNINSTALL) @list='$(dist_val_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(valdir)/$$f'"; \ rm -f "$(DESTDIR)$(valdir)/$$f"; \ done install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" @list='$(pkgconfig_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done install-nodist_incincHEADERS: $(nodist_incinc_HEADERS) @$(NORMAL_INSTALL) test -z "$(incincdir)" || $(MKDIR_P) "$(DESTDIR)$(incincdir)" @list='$(nodist_incinc_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(nodist_incincHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(incincdir)/$$f'"; \ $(nodist_incincHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(incincdir)/$$f"; \ done uninstall-nodist_incincHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_incinc_HEADERS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(incincdir)/$$f'"; \ rm -f "$(DESTDIR)$(incincdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d $(distdir) || mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(DATA) $(HEADERS) config.h all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(valdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(incincdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) clean: clean-recursive clean-am: clean-generic clean-local mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-dist_valDATA install-nodist_incincHEADERS \ install-pkgconfigDATA install-dvi: install-dvi-recursive install-exec-am: @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-exec-hook install-html: install-html-recursive install-info: install-info-recursive install-man: install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-dist_valDATA uninstall-nodist_incincHEADERS \ uninstall-pkgconfigDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-exec-am install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am all-local am--refresh check check-am clean \ clean-generic clean-local ctags ctags-recursive dist dist-all \ dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-zip \ distcheck distclean distclean-generic distclean-hdr \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dist_valDATA install-dvi \ install-dvi-am install-exec install-exec-am install-exec-hook \ install-html install-html-am install-info install-info-am \ install-man install-nodist_incincHEADERS install-pdf \ install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ tags-recursive uninstall uninstall-am uninstall-dist_valDATA \ uninstall-nodist_incincHEADERS uninstall-pkgconfigDATA # The kludge that passes for vex's build system can't handle parallel # builds. So, for the time being, serialise all Valgrind building. # (this is equivalent to enforcing "make -j 1". .NOTPARALLEL: # No need to generate valt_load_address*.lds; the final executables # can be linked to be at any address. They will be relocated by # AIX kernel when they are loaded. # Ditto default.supp: $(DEFAULT_SUPP_FILES) echo "# This is a generated file, composed of the following suppression rules:" > default.supp echo "# " $(DEFAULT_SUPP_FILES) >> default.supp cat $(DEFAULT_SUPP_FILES) >> default.supp regtest: check /usr/bin/perl tests/vg_regtest $(TOOLS) $(EXP_TOOLS) nonexp-regtest: check /usr/bin/perl tests/vg_regtest $(TOOLS) exp-regtest: check /usr/bin/perl tests/vg_regtest $(EXP_TOOLS) perf: check /usr/bin/perl perf/vg_perf perf install-exec-hook: $(mkinstalldirs) $(DESTDIR)$(valdir) all-local: default.supp mkdir -p $(inplacedir) rm -f $(inplacedir)/default.supp ln -s ../default.supp $(inplacedir) clean-local: rm -rf $(inplacedir) # Generate a linker script for linking the binaries. This is the # standard gcc linker script, except hacked so that an alternative # load address can be specified by (1) asking gcc to use this script # (-Wl,-T,valt_load_address.lds) and (2) setting the symbol # valt_load_address to the required value # (-Wl,-defsym,valt_load_address=0x70000000). # # Extract ld's default linker script and hack it to our needs. # First we cut everything above and below the "=====..." lines at the top # and bottom. # Then we have to replace the load address with "valt_load_address". # The line to replace in has one of the following two forms: # # . = 0x08048000 + SIZEOF_HEADERS; # # or # PROVIDE (__executable_start = 0x08048000); . = 0x08048000 + SIZEOF_HEADERS; # # So we search for the line with a hex value "+ SIZEOF_HEADERS", and replace # all the hex values in that line with "valt_load_address". valt_load_address_x86_linux.lds: Makefile $(CC) -m32 -Wl,--verbose -nostdlib 2>&1 | sed \ -e '1,/^=====\+$$/d' \ -e '/^=====\+$$/,/.\*/d' \ -e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \ || rm -f $@ valt_load_address_amd64_linux.lds: Makefile $(CC) -m64 -Wl,--verbose -nostdlib 2>&1 | sed \ -e '1,/^=====\+$$/d' \ -e '/^=====\+$$/,/.\*/d' \ -e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \ || rm -f $@ valt_load_address_ppc32_linux.lds: Makefile $(CC) -m32 -Wl,--verbose -nostdlib 2>&1 | sed \ -e '1,/^=====\+$$/d' \ -e '/^=====\+$$/,/.\*/d' \ -e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \ || rm -f $@ valt_load_address_ppc64_linux.lds: Makefile $(CC) -m64 -Wl,--verbose -nostdlib 2>&1 | sed \ -e '1,/^=====\+$$/d' \ -e '/^=====\+$$/,/.\*/d' \ -e '/\. = \(0x[0-9A-Fa-f]\+\|SEGMENT_START("[^"]\+", 0x[0-9A-Fa-f]\+)\) + SIZEOF_HEADERS/s/0x[0-9A-Fa-f]\+/valt_load_address/g' > $@ \ || rm -f $@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: