Imported Upstream version 0.9.8.0

4 files changed, 666 insertions, 0 deletions

diff --git a/man/Makefile.am b/man/Makefile.am
new file mode 100644
index 00000000..06ab1bb3
--- /dev/null
+++ b/man/Makefile.am
@@ -0,0 +1,2 @@
+man_MANS = nm-applet.1 nm-connection-editor.1
+
diff --git a/man/Makefile.in b/man/Makefile.in
new file mode 100644
index 00000000..4ff9e080
--- /dev/null
+++ b/man/Makefile.in
@@ -0,0 +1,561 @@
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = man
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/nm-applet.1.in $(srcdir)/nm-connection-editor.1.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/compiler_warnings.m4 \
+	$(top_srcdir)/m4/glib-makefile.m4 $(top_srcdir)/m4/intltool.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = nm-applet.1 nm-connection-editor.1
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man1dir = $(mandir)/man1
+am__installdirs = "$(DESTDIR)$(man1dir)"
+NROFF = nroff
+MANS = $(man_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALL_LINGUAS = @ALL_LINGUAS@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DBUS_126_CFLAGS = @DBUS_126_CFLAGS@
+DBUS_126_LIBS = @DBUS_126_LIBS@
+DBUS_SYS_DIR = @DBUS_SYS_DIR@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DISABLE_DEPRECATED = @DISABLE_DEPRECATED@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCONF_CFLAGS = @GCONF_CFLAGS@
+GCONF_LIBS = @GCONF_LIBS@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GLIB_CFLAGS = @GLIB_CFLAGS@
+GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
+GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
+GLIB_LIBS = @GLIB_LIBS@
+GLIB_MAKEFILE = @GLIB_MAKEFILE@
+GLIB_MKENUMS = @GLIB_MKENUMS@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GNOME_BLUETOOTH_CFLAGS = @GNOME_BLUETOOTH_CFLAGS@
+GNOME_BLUETOOTH_LIBS = @GNOME_BLUETOOTH_LIBS@
+GNOME_KEYRING_CFLAGS = @GNOME_KEYRING_CFLAGS@
+GNOME_KEYRING_LIBS = @GNOME_KEYRING_LIBS@
+GOBJECT_CFLAGS = @GOBJECT_CFLAGS@
+GOBJECT_LIBS = @GOBJECT_LIBS@
+GREP = @GREP@
+GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
+GTK_CFLAGS = @GTK_CFLAGS@
+GTK_LIBS = @GTK_LIBS@
+GUDEV_CFLAGS = @GUDEV_CFLAGS@
+GUDEV_LIBS = @GUDEV_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
+INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
+INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
+INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@
+INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@
+INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@
+INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@
+INTROSPECTION_LIBS = @INTROSPECTION_LIBS@
+INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@
+INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@
+INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@
+ISO_CODES_CFLAGS = @ISO_CODES_CFLAGS@
+ISO_CODES_LIBS = @ISO_CODES_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBNOTIFY_07_CFLAGS = @LIBNOTIFY_07_CFLAGS@
+LIBNOTIFY_07_LIBS = @LIBNOTIFY_07_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MM_GLIB_CFLAGS = @MM_GLIB_CFLAGS@
+MM_GLIB_LIBS = @MM_GLIB_LIBS@
+MSGFMT = @MSGFMT@
+MSGFMT_OPTS = @MSGFMT_OPTS@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMA_CFLAGS = @NMA_CFLAGS@
+NMA_LIBS = @NMA_LIBS@
+NMEDIT = @NMEDIT@
+NOTIFY_CFLAGS = @NOTIFY_CFLAGS@
+NOTIFY_LIBS = @NOTIFY_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POFILES = @POFILES@
+POSUB = @POSUB@
+PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
+PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+gsettingsschemadir = @gsettingsschemadir@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+intltool__v_merge_options_ = @intltool__v_merge_options_@
+intltool__v_merge_options_0 = @intltool__v_merge_options_0@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+man_MANS = nm-applet.1 nm-connection-editor.1
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu man/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+nm-applet.1: $(top_builddir)/config.status $(srcdir)/nm-applet.1.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+nm-connection-editor.1: $(top_builddir)/config.status $(srcdir)/nm-connection-editor.1.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man1: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+	for dir in "$(DESTDIR)$(man1dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-man1 \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	uninstall uninstall-am uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/man/nm-applet.1.in b/man/nm-applet.1.in
new file mode 100644
index 00000000..403b7739
--- /dev/null
+++ b/man/nm-applet.1.in
@@ -0,0 +1,43 @@
+.\" nm-applet (1) manual page
+.\"
+.\" This is free documentation; you can redistribute it and/or
+.\" modify it under the terms of the GNU General Public License as
+.\" published by the Free Software Foundation; either version 2 of
+.\" the License, or (at your option) any later version.
+.\"
+.\" The GNU General Public License's references to "object code"
+.\" and "executables" are to be interpreted as the output of any
+.\" document formatting or typesetting system, including
+.\" intermediate and printed output.
+.\"
+.\" This manual is distributed in the hope that it will be useful,
+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+.\" GNU General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public Licence along
+.\" with this manual; if not, write to the Free Software Foundation, Inc.,
+.\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+.\"
+.\" Copyright (C) 2013 Red Hat, Inc.
+.\"
+.TH NM-APPLET "1" "15 February 2013"
+
+.SH NAME
+nm\-applet \(en network monitor and control GUI applet
+.SH SYNOPSIS
+.B nm\-applet
+.RI " [ " OPTIONS " ]
+
+.SH DESCRIPTION
+.B nm\-applet
+is a GTK\(hybased GUI applet to monitor network status and devices and to start
+and stop network connections managed by NetworkManager.  \fInm\-applet\fP
+is normally started at login by the desktop session manager and does not
+need to be run manually.  \fInm\-applet\fP conforms to the XDG System Tray
+specification and requires that the desktop environment provide a System Tray
+implementation in which the applet will be embedded.
+
+.SH SEE ALSO
+.BR NetworkManager(8),
+.BR nm\-connection\-editor(1).
diff --git a/man/nm-connection-editor.1.in b/man/nm-connection-editor.1.in
new file mode 100644
index 00000000..94890352
--- /dev/null
+++ b/man/nm-connection-editor.1.in
@@ -0,0 +1,60 @@
+.\" nm-connection-editor (1) manual page
+.\"
+.\" This is free documentation; you can redistribute it and/or
+.\" modify it under the terms of the GNU General Public License as
+.\" published by the Free Software Foundation; either version 2 of
+.\" the License, or (at your option) any later version.
+.\"
+.\" The GNU General Public License's references to "object code"
+.\" and "executables" are to be interpreted as the output of any
+.\" document formatting or typesetting system, including
+.\" intermediate and printed output.
+.\"
+.\" This manual is distributed in the hope that it will be useful,
+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+.\" GNU General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public Licence along
+.\" with this manual; if not, write to the Free Software Foundation, Inc.,
+.\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+.\"
+.\" Copyright (C) 2013 Red Hat, Inc.
+.\"
+.TH NM-CONNECTION-EDITOR "1" "15 February 2013"
+
+.SH NAME
+nm\-connection\-editor \(en network connection editor for NetworkManager
+.SH SYNOPSIS
+.B nm\-connection\-editor
+.RI " [ " OPTIONS " ]
+
+.SH DESCRIPTION
+.B nm\-connection\-editor
+is a GTK\(hybased application to add, remove, and modify network connections
+stored by NetworkManager.  NetworkManager must be running for any network
+connections to be added, removed, or modified.
+
+.SH OPTIONS
+.TP
+.B \-t, \-\-type=<type>
+Type of connection to create or show.  Values are NetworkManager
+setting names, eg "802\-3\-ethernet", "802\-11\-wireless", "bridge", "bond",
+"wimax", "infiniband", "vlan", etc.  Does nothing if \-\-create or \-\-show
+is not given.
+.TP
+.B \-s, \-\-show
+Expand or collapse the network list to highlight the network connection type
+given by \-\-type.
+.TP
+.B \-c, \-\-create
+Create a new connection of the type given by \-\-type and allow the user to
+modify connection details.
+.TP
+.B \-e, \-\-edit=<uuid>
+Show the network connection edit window for the connection of the given UUID.
+
+.SH SEE ALSO
+.BR nmcli(1),
+.BR NetworkManager(8),
+.BR nm\-applet(1).