Import upstream version 1.8.8

8 files changed, 1021 insertions, 212 deletions

diff --git a/build/aclocal.compare.m4 b/build/aclocal.compare.m4
new file mode 100644
index 0000000..bd6c51b
--- /dev/null
+++ b/build/aclocal.compare.m4
@@ -0,0 +1,162 @@
+dnl @synopsis AX_COMPARE_VERSION(VERSION_A, OP, VERSION_B, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
+dnl
+dnl This macro compares two version strings. It is used heavily in the
+dnl macro _AX_PATH_BDB for library checking. Due to the various number
+dnl of minor-version numbers that can exist, and the fact that string
+dnl comparisons are not compatible with numeric comparisons, this is
+dnl not necessarily trivial to do in a autoconf script. This macro
+dnl makes doing these comparisons easy.
+dnl
+dnl The six basic comparisons are available, as well as checking
+dnl equality limited to a certain number of minor-version levels.
+dnl
+dnl The operator OP determines what type of comparison to do, and can
+dnl be one of:
+dnl
+dnl  eq  - equal (test A == B)
+dnl  ne  - not equal (test A != B)
+dnl  le  - less than or equal (test A <= B)
+dnl  ge  - greater than or equal (test A >= B)
+dnl  lt  - less than (test A < B)
+dnl  gt  - greater than (test A > B)
+dnl
+dnl Additionally, the eq and ne operator can have a number after it to
+dnl limit the test to that number of minor versions.
+dnl
+dnl  eq0 - equal up to the length of the shorter version
+dnl  ne0 - not equal up to the length of the shorter version
+dnl  eqN - equal up to N sub-version levels
+dnl  neN - not equal up to N sub-version levels
+dnl
+dnl When the condition is true, shell commands ACTION-IF-TRUE are run,
+dnl otherwise shell commands ACTION-IF-FALSE are run. The environment
+dnl variable 'ax_compare_version' is always set to either 'true' or
+dnl 'false' as well.
+dnl
+dnl Examples:
+dnl
+dnl   AX_COMPARE_VERSION([3.15.7],[lt],[3.15.8])
+dnl   AX_COMPARE_VERSION([3.15],[lt],[3.15.8])
+dnl
+dnl would both be true.
+dnl
+dnl   AX_COMPARE_VERSION([3.15.7],[eq],[3.15.8])
+dnl   AX_COMPARE_VERSION([3.15],[gt],[3.15.8])
+dnl
+dnl would both be false.
+dnl
+dnl   AX_COMPARE_VERSION([3.15.7],[eq2],[3.15.8])
+dnl
+dnl would be true because it is only comparing two minor versions.
+dnl
+dnl   AX_COMPARE_VERSION([3.15.7],[eq0],[3.15])
+dnl
+dnl would be true because it is only comparing the lesser number of
+dnl minor versions of the two values.
+dnl
+dnl Note: The characters that separate the version numbers do not
+dnl matter. An empty string is the same as version 0. OP is evaluated
+dnl by autoconf, not configure, so must be a string, not a variable.
+dnl
+dnl The author would like to acknowledge Guido Draheim whose advice
+dnl about the m4_case and m4_ifvaln functions make this macro only
+dnl include the portions necessary to perform the specific comparison
+dnl specified by the OP argument in the final configure script.
+dnl
+dnl @category Misc
+dnl @author Tim Toolan <toolan@ele.uri.edu>
+dnl @version 2004-03-01
+dnl @license GPLWithACException
+
+dnl #########################################################################
+AC_DEFUN([AX_COMPARE_VERSION], [
+  # Used to indicate true or false condition
+  ax_compare_version=false
+
+  # Convert the two version strings to be compared into a format that
+  # allows a simple string comparison.  The end result is that a version
+  # string of the form 1.12.5-r617 will be converted to the form
+  # 0001001200050617.  In other words, each number is zero padded to four
+  # digits, and non digits are removed.
+  AS_VAR_PUSHDEF([A],[ax_compare_version_A])
+  A=`echo "$1" | sed -e 's/\([[0-9]]*\)/Z\1Z/g' \
+                     -e 's/Z\([[0-9]]\)Z/Z0\1Z/g' \
+                     -e 's/Z\([[0-9]][[0-9]]\)Z/Z0\1Z/g' \
+                     -e 's/Z\([[0-9]][[0-9]][[0-9]]\)Z/Z0\1Z/g' \
+                     -e 's/[[^0-9]]//g'`
+
+  AS_VAR_PUSHDEF([B],[ax_compare_version_B])
+  B=`echo "$3" | sed -e 's/\([[0-9]]*\)/Z\1Z/g' \
+                     -e 's/Z\([[0-9]]\)Z/Z0\1Z/g' \
+                     -e 's/Z\([[0-9]][[0-9]]\)Z/Z0\1Z/g' \
+                     -e 's/Z\([[0-9]][[0-9]][[0-9]]\)Z/Z0\1Z/g' \
+                     -e 's/[[^0-9]]//g'`
+
+  dnl # In the case of le, ge, lt, and gt, the strings are sorted as necessary
+  dnl # then the first line is used to determine if the condition is true.
+  dnl # The sed right after the echo is to remove any indented white space.
+  m4_case(m4_tolower($2),
+  [lt],[
+    ax_compare_version=`echo "x$A
+x$B" | sed 's/^ *//' | sort -r | sed "s/x${A}/false/;s/x${B}/true/;1q"`
+  ],
+  [gt],[
+    ax_compare_version=`echo "x$A
+x$B" | sed 's/^ *//' | sort | sed "s/x${A}/false/;s/x${B}/true/;1q"`
+  ],
+  [le],[
+    ax_compare_version=`echo "x$A
+x$B" | sed 's/^ *//' | sort | sed "s/x${A}/true/;s/x${B}/false/;1q"`
+  ],
+  [ge],[
+    ax_compare_version=`echo "x$A
+x$B" | sed 's/^ *//' | sort -r | sed "s/x${A}/true/;s/x${B}/false/;1q"`
+  ],[
+    dnl Split the operator from the subversion count if present.
+    m4_bmatch(m4_substr($2,2),
+    [0],[
+      # A count of zero means use the length of the shorter version.
+      # Determine the number of characters in A and B.
+      ax_compare_version_len_A=`echo "$A" | awk '{print(length)}'`
+      ax_compare_version_len_B=`echo "$B" | awk '{print(length)}'`
+
+      # Set A to no more than B's length and B to no more than A's length.
+      A=`echo "$A" | sed "s/\(.\{$ax_compare_version_len_B\}\).*/\1/"`
+      B=`echo "$B" | sed "s/\(.\{$ax_compare_version_len_A\}\).*/\1/"`
+    ],
+    [[0-9]+],[
+      # A count greater than zero means use only that many subversions
+      A=`echo "$A" | sed "s/\(\([[0-9]]\{4\}\)\{m4_substr($2,2)\}\).*/\1/"`
+      B=`echo "$B" | sed "s/\(\([[0-9]]\{4\}\)\{m4_substr($2,2)\}\).*/\1/"`
+    ],
+    [.+],[
+      AC_WARNING(
+        [illegal OP numeric parameter: $2])
+    ],[])
+
+    # Pad zeros at end of numbers to make same length.
+    ax_compare_version_tmp_A="$A`echo $B | sed 's/./0/g'`"
+    B="$B`echo $A | sed 's/./0/g'`"
+    A="$ax_compare_version_tmp_A"
+
+    # Check for equality or inequality as necessary.
+    m4_case(m4_tolower(m4_substr($2,0,2)),
+    [eq],[
+      test "x$A" = "x$B" && ax_compare_version=true
+    ],
+    [ne],[
+      test "x$A" != "x$B" && ax_compare_version=true
+    ],[
+      AC_WARNING([illegal OP parameter: $2])
+    ])
+  ])
+
+  AS_VAR_POPDEF([A])dnl
+  AS_VAR_POPDEF([B])dnl
+
+  dnl # Execute ACTION-IF-TRUE / ACTION-IF-FALSE.
+  if test "$ax_compare_version" = "true" ; then
+    m4_ifvaln([$4],[$4],[:])dnl
+    m4_ifvaln([$5],[else $5])dnl
+  fi
+]) dnl AX_COMPARE_VERSION
diff --git a/build/config.guess b/build/config.guess
index f32079a..da83314 100755
--- a/build/config.guess
+++ b/build/config.guess
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 #   Free Software Foundation, Inc.
 
-timestamp='2008-01-23'
+timestamp='2009-04-27'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -324,6 +324,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	case `/usr/bin/uname -p` in
 	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
@@ -331,7 +334,20 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
@@ -796,7 +812,7 @@ EOF
 	    x86)
 		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
-	    EM64T | authenticamd)
+	    EM64T | authenticamd | genuineintel)
 		echo x86_64-unknown-interix${UNAME_RELEASE}
 		exit ;;
 	    IA64)
@@ -935,6 +951,9 @@ EOF
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
 	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-gnu
+	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -985,9 +1004,6 @@ EOF
 	  a.out-i386-linux)
 		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
 		exit ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
@@ -1102,8 +1118,11 @@ EOF
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
+        # the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
         exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
@@ -1141,6 +1160,16 @@ EOF
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
           && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
@@ -1216,6 +1245,9 @@ EOF
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
 	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1324,6 +1356,9 @@ EOF
     i*86:rdos:*:*)
 	echo ${UNAME_MACHINE}-pc-rdos
 	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
diff --git a/build/config.sub b/build/config.sub
index 6759825..a39437d 100755
--- a/build/config.sub
+++ b/build/config.sub
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 #   Free Software Foundation, Inc.
 
-timestamp='2008-01-16'
+timestamp='2009-04-17'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -122,6 +122,7 @@ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
   nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
   uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
@@ -249,13 +250,16 @@ case $basic_machine in
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
+	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep \
+	| maxq | mb | microblaze | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
+	| mips64octeon | mips64octeonel \
 	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
@@ -268,6 +272,7 @@ case $basic_machine in
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| moxie \
 	| mt \
 	| msp430 \
 	| nios | nios2 \
@@ -277,7 +282,7 @@ case $basic_machine in
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -286,7 +291,7 @@ case $basic_machine in
 	| v850 | v850e \
 	| we32k \
 	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-	| z8k)
+	| z8k | z80)
 		basic_machine=$basic_machine-unknown
 		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
@@ -329,14 +334,17 @@ case $basic_machine in
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
+	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
+	| mips64octeon-* | mips64octeonel-* \
 	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
@@ -358,20 +366,20 @@ case $basic_machine in
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
 	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
 	| xstormy16-* | xtensa*-* \
 	| ymp-* \
-	| z8k-*)
+	| z8k-* | z80-*)
 		;;
 	# Recognize the basic CPU types without company name, with glob match.
 	xtensa*)
@@ -439,6 +447,10 @@ case $basic_machine in
 		basic_machine=m68k-apollo
 		os=-bsd
 		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -459,6 +471,10 @@ case $basic_machine in
 		basic_machine=c90-cray
 		os=-unicos
 		;;
+        cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -526,6 +542,10 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
 	djgpp)
 		basic_machine=i586-pc
 		os=-msdosdjgpp
@@ -1128,6 +1148,10 @@ case $basic_machine in
 		basic_machine=z8k-unknown
 		os=-sim
 		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -1166,7 +1190,7 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
 	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
@@ -1238,8 +1262,9 @@ case $os in
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
+	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
@@ -1248,7 +1273,7 @@ case $os in
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
 	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
@@ -1388,6 +1413,9 @@ case $os in
 	-zvmoe)
 		os=-zvmoe
 		;;
+	-dicos*)
+		os=-dicos
+		;;
 	-none)
 		;;
 	*)
diff --git a/build/libtool.m4 b/build/libtool.m4
index 6e86e5b..1e7ea47 100644
--- a/build/libtool.m4
+++ b/build/libtool.m4
@@ -380,12 +380,12 @@ m4_define([lt_decl_dquote_varnames],
 # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
 # ---------------------------------------------------
 m4_define([lt_decl_varnames_tagged],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
-     m4_quote(m4_if([$2], [],
-		     m4_quote(lt_decl_tag_varnames),
-		  m4_quote(m4_shift($@)))),
-     m4_split(m4_normalize(m4_quote(_LT_TAGS))))])
-m4_define([_lt_decl_varnames_tagged], [lt_combine([$1], [$2], [_], $3)])
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
 
 
 # lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
@@ -945,10 +945,10 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
     darwin1.*)
       _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on 
+    darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it? 
+      # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
 	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
 	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
@@ -990,7 +990,11 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
   _LT_TAGVAR(whole_archive_flag_spec, $1)=''
   _LT_TAGVAR(link_all_deplibs, $1)=yes
   _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-  if test "$GCC" = "yes"; then
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
     output_verbose_link_cmd=echo
     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
@@ -1512,7 +1516,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=-1;
     ;;
 
-  cygwin* | mingw*)
+  cygwin* | mingw* | cegcc*)
     # On Win9x/ME, this test blows up -- it succeeds, but takes
     # about 5 minutes as the teststring grows exponentially.
     # Worse, since 9x/ME are not pre-emptively multitasking,
@@ -1680,10 +1684,6 @@ else
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -1699,7 +1699,7 @@ int main ()
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }]
 _LT_EOF
   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
@@ -1738,7 +1738,7 @@ else
     lt_cv_dlopen_self=yes
     ;;
 
-  mingw* | pw32*)
+  mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
     ;;
@@ -2035,6 +2035,7 @@ m4_defun([_LT_SYS_DYNAMIC_LINKER],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
 m4_require([_LT_DECL_SED])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
 m4_if([$1],
@@ -2199,14 +2200,14 @@ bsdi[[45]]*)
   # libtool to hard-code these into programs
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
@@ -2229,7 +2230,7 @@ cygwin* | mingw* | pw32*)
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-    mingw*)
+    mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
@@ -2667,7 +2668,7 @@ tpf*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
-  library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -2691,7 +2692,7 @@ variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
- 
+
 if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
   sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
 fi
@@ -2968,6 +2969,7 @@ _LT_DECL([], [reload_cmds], [2])dnl
 #  -- PORTME fill in with the dynamic library characteristics
 m4_defun([_LT_CHECK_MAGIC_METHOD],
 [m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
 AC_CACHE_CHECK([how to recognize dependent libraries],
 lt_cv_deplibs_check_method,
 [lt_cv_file_magic_cmd='$MAGIC_CMD'
@@ -3018,6 +3020,12 @@ mingw* | pw32*)
   fi
   ;;
 
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
 darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
@@ -3329,7 +3337,7 @@ case $host_os in
 aix*)
   symcode='[[BCDT]]'
   ;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   symcode='[[ABCDGISTW]]'
   ;;
 hpux*)
@@ -3575,7 +3583,7 @@ m4_if([$1], [CXX], [
     beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
       # PIC is the default for these OSes.
       ;;
-    mingw* | cygwin* | os2* | pw32*)
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
@@ -3602,10 +3610,11 @@ m4_if([$1], [CXX], [
       fi
       ;;
     hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
       case $host_cpu in
-      hppa*64*|ia64*)
+      hppa*64*)
 	;;
       *)
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
@@ -3703,12 +3712,19 @@ m4_if([$1], [CXX], [
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
-	  icpc* | ecpc* )
-	    # Intel C++
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
 	  pgCC* | pgcpp*)
 	    # Portland Group C++ compiler
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -3874,7 +3890,7 @@ m4_if([$1], [CXX], [
       # PIC is the default for these OSes.
       ;;
 
-    mingw* | cygwin* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
@@ -3890,10 +3906,11 @@ m4_if([$1], [CXX], [
       ;;
 
     hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
       case $host_cpu in
-      hppa*64*|ia64*)
+      hppa*64*)
 	# +Z the default
 	;;
       *)
@@ -3943,7 +3960,7 @@ m4_if([$1], [CXX], [
       fi
       ;;
 
-    mingw* | cygwin* | pw32* | os2*)
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       m4_if([$1], [GCJ], [],
@@ -3974,11 +3991,25 @@ m4_if([$1], [CXX], [
 
     linux* | k*bsd*-gnu)
       case $cc_basename in
-      icc* | ecc* | ifort*)
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
         ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -4160,7 +4191,7 @@ m4_if([$1], [CXX], [
   pw32*)
     _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
   ;;
-  cygwin* | mingw*)
+  cygwin* | mingw* | cegcc*)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   linux* | k*bsd*-gnu)
@@ -4215,7 +4246,7 @@ dnl Note also adjust exclude_expsyms for C++ above.
   extract_expsyms_cmds=
 
   case $host_os in
-  cygwin* | mingw* | pw32*)
+  cygwin* | mingw* | pw32* | cegcc*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
@@ -4230,6 +4261,9 @@ dnl Note also adjust exclude_expsyms for C++ above.
   openbsd*)
     with_gnu_ld=no
     ;;
+  linux* | k*bsd*-gnu)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+    ;;
   esac
 
   _LT_TAGVAR(ld_shlibs, $1)=yes
@@ -4302,7 +4336,7 @@ _LT_EOF
       fi
       ;;
 
-    cygwin* | mingw* | pw32*)
+    cygwin* | mingw* | pw32* | cegcc*)
       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
@@ -4368,6 +4402,9 @@ _LT_EOF
 	  tmp_addflag=' -i_dynamic -nofor_main' ;;
 	ifc* | ifort*)			# Intel Fortran compiler
 	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
 	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
@@ -4600,6 +4637,7 @@ _LT_EOF
 	fi
       fi
 
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       _LT_TAGVAR(always_export_symbols, $1)=yes
@@ -4654,7 +4692,7 @@ _LT_EOF
       _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
       ;;
 
-    cygwin* | mingw* | pw32*)
+    cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
@@ -4758,7 +4796,7 @@ _LT_EOF
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
@@ -5543,6 +5581,7 @@ if test "$_lt_caught_CXX_error" != yes; then
           fi
         fi
 
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
         # It seems that -bexpall does not export symbols beginning with
         # underscore (_), so it is better to generate a list of symbols to
 	# export.
@@ -5601,7 +5640,7 @@ if test "$_lt_caught_CXX_error" != yes; then
         esac
         ;;
 
-      cygwin* | mingw* | pw32*)
+      cygwin* | mingw* | pw32* | cegcc*)
         # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
         # as there is no search path for DLLs.
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
@@ -6986,6 +7025,18 @@ AC_SUBST([GREP])
 ])
 
 
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+
 # _LT_DECL_SED
 # ------------
 # Check for a fully-functional sed program, that truncates
diff --git a/build/ltmain.sh b/build/ltmain.sh
index 556c4f9..3506ead 100755
--- a/build/ltmain.sh
+++ b/build/ltmain.sh
@@ -1,6 +1,6 @@
 # Generated from ltmain.m4sh.
 
-# ltmain.sh (GNU libtool) 2.2.4
+# ltmain.sh (GNU libtool) 2.2.6
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
@@ -65,7 +65,7 @@
 #       compiler:		$LTCC
 #       compiler flags:		$LTCFLAGS
 #       linker:		$LD (gnu? $with_gnu_ld)
-#       $progname:		(GNU libtool) 2.2.4 Debian-2.2.4-0ubuntu5
+#       $progname:		(GNU libtool) 2.2.6 Debian-2.2.6a-4
 #       automake:		$automake_version
 #       autoconf:		$autoconf_version
 #
@@ -73,9 +73,9 @@
 
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION="2.2.4 Debian-2.2.4-0ubuntu5"
+VERSION="2.2.6 Debian-2.2.6a-4"
 TIMESTAMP=""
-package_revision=1.2976
+package_revision=1.3012
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -805,7 +805,7 @@ func_enable_tag ()
 
 
   case $host in
-    *cygwin* | *mingw* | *pw32*)
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
       # don't eliminate duplications in $postdeps and $predeps
       opt_duplicate_compiler_generated_deps=:
       ;;
@@ -893,8 +893,9 @@ $opt_help || {
 # determined imposters.
 func_lalib_p ()
 {
-    $SED -e 4q "$1" 2>/dev/null \
-      | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
 }
 
 # func_lalib_unsafe_p file
@@ -907,7 +908,7 @@ func_lalib_p ()
 func_lalib_unsafe_p ()
 {
     lalib_p=no
-    if test -r "$1" && exec 5<&0 <"$1"; then
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
 	for lalib_p_l in 1 2 3 4
 	do
 	    read lalib_p_line
@@ -1275,7 +1276,7 @@ func_mode_compile ()
 
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
       pic_mode=default
       ;;
     esac
@@ -2046,7 +2047,7 @@ func_mode_install ()
 	      'exit $?'
 	  tstripme="$stripme"
 	  case $host_os in
-	  cygwin* | mingw* | pw32*)
+	  cygwin* | mingw* | pw32* | cegcc*)
 	    case $realname in
 	    *.dll.a)
 	      tstripme=""
@@ -2152,7 +2153,7 @@ func_mode_install ()
 
 	# Do a test to see if this is really a libtool program.
 	case $host in
-	*cygwin*|*mingw*)
+	*cygwin* | *mingw*)
 	    if func_ltwrapper_executable_p "$file"; then
 	      func_ltwrapper_scriptname "$file"
 	      wrapper=$func_ltwrapper_scriptname_result
@@ -2358,7 +2359,7 @@ extern \"C\" {
 	      $RM $export_symbols
 	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 	      case $host in
-	      *cygwin* | *mingw* )
+	      *cygwin* | *mingw* | *cegcc* )
                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
 	        ;;
@@ -2370,7 +2371,7 @@ extern \"C\" {
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
-	        *cygwin | *mingw* )
+	        *cygwin | *mingw* | *cegcc* )
 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
 	          ;;
@@ -2426,7 +2427,7 @@ typedef struct {
 } lt_dlsymlist;
 "
 	  case $host in
-	  *cygwin* | *mingw* )
+	  *cygwin* | *mingw* | *cegcc* )
 	    $ECHO >> "$output_objdir/$my_dlsyms" "\
 /* DATA imports from DLLs on WIN32 con't be const, because
    runtime relocations are performed -- see ld's documentation
@@ -2512,7 +2513,7 @@ static const void *lt_preloaded_setup() {
 	# Transform the symbol file into the correct name.
 	symfileobj="$output_objdir/${my_outputname}S.$objext"
 	case $host in
-	*cygwin* | *mingw* )
+	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
 	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
@@ -2691,25 +2692,16 @@ func_extract_archives ()
 
 
 
-# func_emit_wrapper arg
+# func_emit_wrapper_part1 [arg=no]
 #
-# emit a libtool wrapper script on stdout
-# don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variable
-# set therein.
-#
-# arg is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the '.lib' directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
 {
-	func_emit_wrapper_arg1=no
+	func_emit_wrapper_part1_arg1=no
 	if test -n "$1" ; then
-	  func_emit_wrapper_arg1=$1
+	  func_emit_wrapper_part1_arg1=$1
 	fi
 
 	$ECHO "\
@@ -2794,10 +2786,27 @@ else
     file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
     file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
   done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+	func_emit_wrapper_part2_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part2_arg1=$1
+	fi
+
+	$ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
@@ -2888,7 +2897,7 @@ else
 "
 	case $host in
 	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
+	*-*-mingw | *-*-os2* | *-cegcc*)
 	  $ECHO "\
       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 "
@@ -2914,7 +2923,207 @@ else
 fi\
 "
 }
-# end: func_emit_wrapper
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_arg1=$1
+	fi
+
+	# split this up so that func_emit_cwrapperexe_src
+	# can call each part independently.
+	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+  func_to_host_path_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        case $build in
+          *mingw* ) # actually, msys
+            # awkward: cmd appends spaces to result
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # Unfortunately, winepath does not exit with a non-zero
+            # error code, so we are forced to check the contents of
+            # stdout. On the other hand, if the command is not
+            # found, the shell will set an exit code of 127 and print
+            # *an error message* to stdout. So we must check for both
+            # error code of zero AND non-empty stdout, which explains
+            # the odd construction:
+            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+                $SED -e "$lt_sed_naive_backslashify"`
+            else
+              # Allow warning below.
+              func_to_host_path_result=""
+            fi
+            ;;
+        esac
+        if test -z "$func_to_host_path_result" ; then
+          func_error "Could not determine host path corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback:
+          func_to_host_path_result="$1"
+        fi
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_path
+
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+  func_to_host_pathlist_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        # Remove leading and trailing path separator characters from
+        # ARG. msys behavior is inconsistent here, cygpath turns them
+        # into '.;' and ';.', and winepath ignores them completely.
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
+        case $build in
+          *mingw* ) # Actually, msys.
+            # Awkward: cmd appends spaces to result.
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # unfortunately, winepath doesn't convert pathlists
+            func_to_host_pathlist_result=""
+            func_to_host_pathlist_oldIFS=$IFS
+            IFS=:
+            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+              IFS=$func_to_host_pathlist_oldIFS
+              if test -n "$func_to_host_pathlist_f" ; then
+                func_to_host_path "$func_to_host_pathlist_f"
+                if test -n "$func_to_host_path_result" ; then
+                  if test -z "$func_to_host_pathlist_result" ; then
+                    func_to_host_pathlist_result="$func_to_host_path_result"
+                  else
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                  fi
+                fi
+              fi
+              IFS=:
+            done
+            IFS=$func_to_host_pathlist_oldIFS
+            ;;
+        esac
+        if test -z "$func_to_host_pathlist_result" ; then
+          func_error "Could not determine the host path(s) corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback. This may break if $1 contains DOS-style drive
+          # specifications. The fix is not to complicate the expression
+          # below, but for the user to provide a working wine installation
+          # with winepath so that path translation in the cross-to-mingw
+          # case works properly.
+          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+        fi
+        # Now, add the leading and trailing path separators back
+        case "$1" in
+          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+            ;;
+        esac
+        case "$1" in
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+            ;;
+        esac
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_pathlist
 
 # func_emit_cwrapperexe_src
 # emit the source code for a wrapper executable on stdout
@@ -2951,6 +3160,12 @@ EOF
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
 # endif
 #endif
 #include <malloc.h>
@@ -3057,29 +3272,105 @@ int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
 void lt_fatal (const char *message, ...);
-
-static const char *script_text =
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+
+static const char *script_text_part1 =
 EOF
 
-	    func_emit_wrapper yes |
+	    func_emit_wrapper_part1 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
+
+static const char *script_text_part2 =
+EOF
+	    func_emit_wrapper_part2 yes |
 	        $SED -e 's/\([\\"]\)/\\\1/g' \
 	             -e 's/^/  "/' -e 's/$/\\n"/'
 	    echo ";"
 
 	    cat <<EOF
 const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_pathlist "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_pathlist "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
+
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
 
 int
 main (int argc, char *argv[])
 {
   char **newargz;
+  int  newargc;
   char *tmp_pathspec;
   char *actual_cwrapper_path;
-  char *shwrapper_name;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
   intptr_t rval = 127;
-  FILE *shwrapper;
 
-  const char *dumpscript_opt = "--lt-dump-script";
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
@@ -3099,38 +3390,14 @@ EOF
 		;;
 	      esac
 
-	    cat <<EOF
-	  printf ("%s", script_text);
+	    cat <<"EOF"
+	  printf ("%s", script_text_part1);
+	  printf ("%s", script_text_part2);
 	  return 0;
 	}
     }
 
-  newargz = XMALLOC (char *, argc + 2);
-EOF
-
-	    if test -n "$TARGETSHELL" ; then
-	      # no path translation at all
-	      lt_newargv0=$TARGETSHELL
-	    else
-	      case "$host" in
-		*mingw* )
-		  # awkward: cmd appends spaces to result
-		  lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-		  lt_newargv0=`( cmd //c echo $SHELL | $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo $SHELL`
-		  case $lt_newargv0 in
-		    *.exe | *.EXE) ;;
-		    *) lt_newargv0=$lt_newargv0.exe ;;
-		  esac
-		  ;;
-		* ) lt_newargv0=$SHELL ;;
-	      esac
-	    fi
-
-		cat <<EOF
-  newargz[0] = (char *) xstrdup ("$lt_newargv0");
-EOF
-
-	    cat <<"EOF"
+  newargz = XMALLOC (char *, argc + 1);
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
     lt_fatal ("Couldn't find %s", argv[0]);
@@ -3142,39 +3409,60 @@ EOF
 			  actual_cwrapper_path));
   XFREE (tmp_pathspec);
 
-  shwrapper_name = (char *) xstrdup (base_name (actual_cwrapper_path));
-  strendzap (actual_cwrapper_path, shwrapper_name);
-
-  /* shwrapper_name transforms */
-  strendzap (shwrapper_name, ".exe");
-  tmp_pathspec = XMALLOC (char, (strlen (shwrapper_name) +
-				 strlen ("_ltshwrapperTMP") + 1));
-  strcpy (tmp_pathspec, shwrapper_name);
-  strcat (tmp_pathspec, "_ltshwrapperTMP");
-  XFREE (shwrapper_name);
-  shwrapper_name = tmp_pathspec;
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
   tmp_pathspec = 0;
-  LTWRAPPER_DEBUGPRINTF (("(main) libtool shell wrapper name: %s\n",
-			  shwrapper_name));
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+			  target_name));
 EOF
 
 	    cat <<EOF
-  newargz[1] =
+  newargz[0] =
     XMALLOC (char, (strlen (actual_cwrapper_path) +
-		    strlen ("$objdir") + 1 + strlen (shwrapper_name) + 1));
-  strcpy (newargz[1], actual_cwrapper_path);
-  strcat (newargz[1], "$objdir");
-  strcat (newargz[1], "/");
-  strcat (newargz[1], shwrapper_name);
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
 EOF
 
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
 
 	    case $host_os in
 	      mingw*)
 	    cat <<"EOF"
   {
     char* p;
-    while ((p = strchr (newargz[1], '\\')) != NULL)
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
       {
 	*p = '/';
       }
@@ -3184,55 +3472,114 @@ EOF
 	    esac
 
 	    cat <<"EOF"
-  XFREE (shwrapper_name);
+  XFREE (target_name);
   XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
 
-  /* always write in binary mode */
-  if ((shwrapper = fopen (newargz[1], FOPEN_WB)) == 0)
-    {
-      lt_fatal ("Could not open %s for writing", newargz[1]);
-    }
-  fprintf (shwrapper, "%s", script_text);
-  fclose (shwrapper);
-
-  make_executable (newargz[1]);
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
 
+  newargc=0;
   for (i = 1; i < argc; i++)
-    newargz[i + 1] = xstrdup (argv[i]);
-  newargz[argc + 1] = NULL;
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
 
-  for (i = 0; i < argc + 1; i++)
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  for (i = 0; i < newargc; i++)
     {
-      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, newargz[i]));
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
     }
 
 EOF
 
 	    case $host_os in
 	      mingw*)
-		cat <<EOF
+		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
-  rval = _spawnv (_P_WAIT, "$lt_newargv0", (const char * const *) newargz);
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
-      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"$lt_newargv0\": errno = %d\n", errno));
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
       return 127;
     }
   return rval;
-}
 EOF
 		;;
 	      *)
-		cat <<EOF
-  execv ("$lt_newargv0", newargz);
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
   return rval; /* =127, but avoids unused variable warning */
-}
 EOF
 		;;
 	    esac
 
 	    cat <<"EOF"
+}
 
 void *
 xmalloc (size_t num)
@@ -3506,6 +3853,177 @@ lt_fatal (const char *message, ...)
   lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
   va_end (ap);
 }
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+
+  p = strchr (arg, (int)'=');
+
+  if (!p)
+    return 1;
+
+  *value = xstrdup (++p);
+
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+
+  return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+
 EOF
 }
 # end: func_emit_cwrapperexe_src
@@ -3515,7 +4033,7 @@ func_mode_link ()
 {
     $opt_debug
     case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
       # which system we are compiling for in order to pass an extra
@@ -3959,6 +4477,13 @@ func_mode_link ()
       -L*)
 	func_stripname '-L' '' "$arg"
 	dir=$func_stripname_result
+	if test -z "$dir"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -3977,14 +4502,16 @@ func_mode_link ()
 	  ;;
 	esac
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -3995,7 +4522,7 @@ func_mode_link ()
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -4072,7 +4599,7 @@ func_mode_link ()
 
       -no-install)
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
 	  # and Darwin in order for the loader to find any dlls it needs.
 	  func_warning "\`-no-install' is ignored for $host"
@@ -4820,19 +5347,19 @@ func_mode_link ()
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
 	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+	      if $opt_duplicate_deps ; then
+		case "$tmp_libs " in
+		*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+		esac
+	      fi
+	      tmp_libs="$tmp_libs $deplib"
+	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    func_fatal_error "\`$lib' is not a convenience library"
 	  fi
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    deplibs="$deplib $deplibs"
-	    if $opt_duplicate_deps ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
 	  continue
 	fi # $pass = conv
 
@@ -5032,7 +5559,7 @@ func_mode_link ()
 	if test -n "$library_names" &&
 	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
 	  case $host in
-	  *cygwin* | *mingw*)
+	  *cygwin* | *mingw* | *cegcc*)
 	      # No point in relinking DLLs because paths are not encoded
 	      notinst_deplibs="$notinst_deplibs $lib"
 	      need_relink=no
@@ -5102,7 +5629,7 @@ func_mode_link ()
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw*)
+	      *cygwin* | mingw* | *cegcc*)
 	        func_arith $current - $age
 		major=$func_arith_result
 		versuffix="-$major"
@@ -5369,6 +5896,7 @@ func_mode_link ()
 	  if test "$link_all_deplibs" != no; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
+	      path=
 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)
@@ -5884,7 +6412,7 @@ func_mode_link ()
 	tempremovelist=`$ECHO "$output_objdir/*"`
 	for p in $tempremovelist; do
 	  case $p in
-	    *.$objext)
+	    *.$objext | *.gcno)
 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
 	       if test "X$precious_files_regex" != "X"; then
@@ -5955,7 +6483,7 @@ func_mode_link ()
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
@@ -6454,7 +6982,7 @@ EOF
 
 	orig_export_symbols=
 	case $host_os in
-	cygwin* | mingw*)
+	cygwin* | mingw* | cegcc*)
 	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
 	    # exporting using user supplied symfile
 	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
@@ -7079,14 +7607,16 @@ EOF
 	  esac
 	fi
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
@@ -7156,6 +7686,10 @@ EOF
           wrappers_required=no
         fi
         ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
@@ -7308,11 +7842,10 @@ EOF
 
 	    func_emit_cwrapperexe_src > $cwrappersource
 
-	    # we should really use a build-platform specific compiler
-	    # here, but OTOH, the wrappers (shell script and this C one)
-	    # are only useful if you want to execute the "real" binary.
-	    # Since the "real" binary is built for $host, then this
-	    # wrapper might as well be built for $host, too.
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
 	    $opt_dry_run || {
 	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
 	      $STRIP $cwrapper
@@ -7597,7 +8130,7 @@ EOF
 	  # place dlname in correct position for cygwin
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
diff --git a/build/ltoptions.m4 b/build/ltoptions.m4
index e970119..34151a3 100644
--- a/build/ltoptions.m4
+++ b/build/ltoptions.m4
@@ -125,7 +125,7 @@ LT_OPTION_DEFINE([LT_INIT], [win32-dll],
 [enable_win32_dll=yes
 
 case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
   AC_CHECK_TOOL(AS, as, false)
   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
   AC_CHECK_TOOL(OBJDUMP, objdump, false)
diff --git a/build/ltsugar.m4 b/build/ltsugar.m4
index 0d258e0..9000a05 100644
--- a/build/ltsugar.m4
+++ b/build/ltsugar.m4
@@ -1,13 +1,13 @@
 # ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
 #
-#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
-#   Written by Gary V. Vaughan, 2004
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 5 ltsugar.m4
+# serial 6 ltsugar.m4
 
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
@@ -63,14 +63,14 @@ m4_define([lt_append],
 # Produce a SEP delimited list of all paired combinations of elements of
 # PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
 # has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
 m4_define([lt_combine],
-[m4_if([$2], [], [],
-  [m4_if([$4], [], [],
-    [lt_join(m4_quote(m4_default([$1], [[, ]])),
-      lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_prefix, [$2],
-		   [m4_foreach(_Lt_suffix, lt_car([m4_shiftn(3, $@)]),
-			       [_Lt_prefix[]$3[]_Lt_suffix ])])))))])])dnl
-])
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
 
 
 # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
diff --git a/build/ltversion.m4 b/build/ltversion.m4
index 45cb155..b8e154f 100644
--- a/build/ltversion.m4
+++ b/build/ltversion.m4
@@ -9,15 +9,15 @@
 
 # Generated from ltversion.in.
 
-# serial 2976 ltversion.m4
+# serial 3012 ltversion.m4
 # This file is part of GNU Libtool
 
-m4_define([LT_PACKAGE_VERSION], [2.2.4])
-m4_define([LT_PACKAGE_REVISION], [1.2976])
+m4_define([LT_PACKAGE_VERSION], [2.2.6])
+m4_define([LT_PACKAGE_REVISION], [1.3012])
 
 AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.4'
-macro_revision='1.2976'
+[macro_version='2.2.6'
+macro_revision='1.3012'
 _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 _LT_DECL(, macro_revision, 0)
 ])