summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-07HACK: add guest-cid option to spicevsockJonathon Jongsma2-1/+8
this option should be set to the same value passed to the vhost-vsock-pci device. For example: -device vhost-vsock-pci,guest-cid=$CID -spice port=0,guest-cid=$CID This is a temporary workaround because it's not obvious yet how to pass this value to the spice server. This allows us to start developing the feature in spice server and then come back to figure out how to do it properly in qemu.
2017-09-14Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20170914' into ↵Peter Maydell17-14/+146
staging HMP pull 2017-09-14 # gpg: Signature made Thu 14 Sep 2017 15:57:30 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-hmp-20170914: hmp: introduce 'info memory_size_summary' command qmp: introduce query-memory-size-summary command hmp: extend "info numa" with hotplugged memory information tests/hmp: test "none" machine with memory dump: do not dump non-existent guest memory hmp: fix "dump-quest-memory" segfault (arm) hmp: fix "dump-quest-memory" segfault (ppc) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-14hmp: introduce 'info memory_size_summary' commandVadim Galitsyn3-0/+35
Add 'info memory_size_summary' command which is a sibling of QMP command query-memory-size-summary. It provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-4-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixed up comments from Igor's review
2017-09-14qmp: introduce query-memory-size-summary commandVadim Galitsyn6-1/+57
Add a new query-memory-size-summary command which provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixup comments as per Igor's review Added 'of' from Vadim's reply
2017-09-14hmp: extend "info numa" with hotplugged memory informationVadim Galitsyn4-9/+26
Report amount of hotplugged memory in addition to total amount per NUMA node. Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-2-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-14tests/hmp: test "none" machine with memoryLaurent Vivier1-0/+4
and add a test case of dump-guest-memory without "[begin length]" parameters. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20170913142036.2469-5-lvivier@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-14dump: do not dump non-existent guest memoryCornelia Huck1-0/+6
It does not really make sense to dump memory that is not there. Moreover, that fixes a segmentation fault when calling dump-guest-memory with no filter for a machine with no memory defined. New behaviour is: (qemu) dump-guest-memory /dev/null dump: no guest memory to dump (qemu) dump-guest-memory /dev/null 0 4096 dump: no guest memory to dump Signed-off-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20170913142036.2469-4-lvivier@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-14hmp: fix "dump-quest-memory" segfault (arm)Laurent Vivier1-2/+9
Running QEMU with qemu-system-aarch64 -M none -nographic -m 256 and executing dump-guest-memory /dev/null 0 8192 results in segfault Fix by checking if we have CPU, and exit with error if there is no CPU: (qemu) dump-guest-memory /dev/null this feature or command is not currently supported Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20170913142036.2469-3-lvivier@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-14hmp: fix "dump-quest-memory" segfault (ppc)Laurent Vivier1-2/+9
Running QEMU with qemu-system-ppc64 -M none -nographic -m 256 and executing dump-guest-memory /dev/null 0 8192 results in segfault Fix by checking if we have CPU, and exit with error if there is no CPU: (qemu) dump-guest-memory /dev/null this feature or command is not currently supported Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20170913142036.2469-2-lvivier@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-14Merge remote-tracking branch 'remotes/kraxel/tags/usb-20170913-pull-request' ↵Peter Maydell4-10/+8
into staging usb: misc small fixes. # gpg: Signature made Wed 13 Sep 2017 10:28:25 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20170913-pull-request: usb: only build usb-host with CONFIG_USB=y usb: drop HOST_USB MAINTAINERS: add missing USB entry xhci: Avoid DMA when ERSTBA is set to zero Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-14sparc: Fix typedef clashDr. David Alan Gilbert1-2/+2
Older compilers (rhel6) don't like redefinition of typedefs Fixes: 12a6c15ef31c98ecefa63e91ac36955383038384 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170914123609.497-1-dgilbert@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-14Merge remote-tracking branch 'remotes/kraxel/tags/ui-20170913-pull-request' ↵Peter Maydell6-59/+7
into staging ui: console fixes drop pixman submodule # gpg: Signature made Wed 13 Sep 2017 09:40:34 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20170913-pull-request: console: add question-mark escape operator console: fix dpy_gfx_replace_surface assert pixman: drop configure switches pixman: drop submodule Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-14Merge remote-tracking branch 'remotes/kraxel/tags/vga-20170913-pull-request' ↵Peter Maydell5-124/+152
into staging vga: bugfixes. qxl: chunked cursor support. # gpg: Signature made Wed 13 Sep 2017 08:41:08 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20170913-pull-request: virtio-gpu: don't clear QemuUIInfo information on reset vga/migration: Update memory map in post_load qxl: add support for chunked cursors. qxl: drop mono cursor support vga: stop passing pointers to vga_draw_line* functions vga: fix display update region calculation (split screen) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-13usb: only build usb-host with CONFIG_USB=yGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Message-id: 20170908111217.21985-3-kraxel@redhat.com
2017-09-13usb: drop HOST_USBGerd Hoffmann2-8/+5
Nowdays we use libusb for usb-host, so we don't have different code for linux vs. bsd any more. So there is little reason to have the HOST_USB variable, we can just write things directly into the Makefile and avoid a pointless indirection. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20170908111217.21985-2-kraxel@redhat.com
2017-09-13MAINTAINERS: add missing USB entryPhilippe Mathieu-Daudé1-0/+1
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-13xhci: Avoid DMA when ERSTBA is set to zeroAlexey Kardashevskiy1-2/+2
The existing XHCI code reads the Event Ring Segment Table Base Address Register (ERSTBA) every time when it is changed. However zero is its default state so one would think that zero there means it is not in use. This adds a check for ERSTBA in addition to the existing check for the Event Ring Segment Table Size Register (ERSTSZ). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-id: 20170911065606.40600-1-aik@ozlabs.ru Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-13console: add question-mark escape operatorAlexander Graf1-1/+2
Some termcaps (found using SLES11SP1) use [? sequences. According to man console_codes (http://linux.die.net/man/4/console_codes) the question mark is a nop and should simply be ignored. This patch does exactly that, rendering screen output readable when outputting guest serial consoles to the graphical console emulator. Signed-off-by: Alexander Graf <agraf@suse.de> Message-id: 20170829113818.42482-1-agraf@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-13console: fix dpy_gfx_replace_surface assertGerd Hoffmann1-1/+1
virtio-gpu can trigger the assert added by commit "6905b93447 console: add same surface replace pre-condition" in multihead setups (where surface can be NULL for secondary displays). Allow surface being NULL. Fixes: 6905b93447a42e606dfd126b90f75f4cd3c6fe94 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20170906142109.2685-1-kraxel@redhat.com
2017-09-13pixman: drop configure switchesGerd Hoffmann1-22/+2
Remove pixman switches from configure, should not be needed any more, configure can figure by itself whenever pixman is needed or not. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170905140116.28181-3-kraxel@redhat.com
2017-09-13pixman: drop submoduleGerd Hoffmann5-35/+2
Drop pixman submodule and support for the "internal" pixman build. pixman should be reasonably well established meanwhile so we don't need the fallback submodule any more. While being at it also drop some #ifdefs for pixman versions older than what we require in configure anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170905140116.28181-2-kraxel@redhat.com
2017-09-13virtio-gpu: don't clear QemuUIInfo information on resetGerd Hoffmann1-12/+0
Don't reset window layout information (passed via virtio_gpu_ui_info) on device reset, so the user interface window layout will be kept intact over reboots. The head size and position was commented out already, so this patch just drops the dead code. Additionally the enabled head mask must be kept so multihead setups work properly too. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1460595 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20170906142058.2460-1-kraxel@redhat.com
2017-09-11tcg/tci: do not use ldst label (never implemented)Philippe Mathieu-Daudé1-4/+0
changed in 659ef5cbb893, this fixes building with --enable-tcg-interpreter: /home/travis/build/qemu/qemu/tcg/tcg.c:116:14: error: ‘tcg_out_ldst_finalize’ used but never defined [-Werror] static bool tcg_out_ldst_finalize(TCGContext *s); ^ Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20170911022839.23231-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-11Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' ↵Peter Maydell4-0/+0
into staging Update OpenBIOS images # gpg: Signature made Mon 11 Sep 2017 08:08:39 BST # gpg: using RSA key 0x5BC2C56FAE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-openbios-signed: Update OpenBIOS images to 314d4f8 built from submodule. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-11Merge remote-tracking branch ↵Peter Maydell1-22/+22
'remotes/vivier/tags/m68k-for-2.11-pull-request' into staging # gpg: Signature made Sun 10 Sep 2017 17:17:28 BST # gpg: using RSA key 0xF30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-for-2.11-pull-request: target/m68k: Switch fpu_rom from make_floatx80() to make_floatx80_init() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-11Update OpenBIOS images to 314d4f8 built from submodule.Mark Cave-Ayland4-0/+0
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2017-09-10target/m68k: Switch fpu_rom from make_floatx80() to make_floatx80_init()Kamil Rytarowski1-22/+22
GCC 4.7.2 on SunOS reports that the values assigned to array members are not real constants: target/m68k/fpu_helper.c:32:5: error: initializer element is not constant target/m68k/fpu_helper.c:32:5: error: (near initialization for 'fpu_rom[0]') rules.mak:66: recipe for target 'target/m68k/fpu_helper.o' failed Convert the array to make_floatx80_init() to fix it. Replace floatx80_pi-like constants with make_floatx80_init() as they are defined as make_floatx80(). This fixes build on SmartOS (Joyent). Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20170904212306.3020-1-n54@gmx.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2017-09-08Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell33-106/+622
pc, pci, virtio: patches queued before 2.10 A bunch of stuff that was posted before the 2.10 timeframe, mostly fixes/cleanups. New PCI bridges. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 08 Sep 2017 14:15:34 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: fw_cfg: rename read callback pci: add reserved slot check to do_pci_register_device() pci: move check for existing devfn into new pci_bus_devfn_available() helper vmgenid: replace x-write-pointer-available hack vhost-user-bridge: fix resume regression (since 2.9) libvhost-user: support resuming vq->last_avail_idx based on used_idx acpi/vmgenid: change device category to misc intel_iommu: fix missing BQL in pt fast path docs: update documentation considering PCIE-PCI bridge hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware hw/pci: introduce pcie-pci-bridge device Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen" hw/acpi: Move acpi_set_pci_info to pcihp hw/acpi: Limit hotplug to root bus on legacy mode pc: add 2.11 machine types vhost: Release memory references on cleanup Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-08Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.11-20170908' ↵Peter Maydell32-2036/+1310
into staging ppc patch queue 2017-09-08 This is the first batch of ppc related patches for qemu-2.11, and it's accumulated quite a few things. Includes: * A cleanup to handling of ppc cpu models from Igor * First parts of fixes to handling of guest vs. host SMT modes from Sam Bobroff * Preliminary patches towards supporting the Sam460 board from Balaton Zoltan * Several fixes for hotplug logic * Assorted other fixes and cleanups # gpg: Signature made Fri 08 Sep 2017 06:28:42 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.11-20170908: (40 commits) ppc: spapr: Move VCPU ID calculation into sPAPR ppc: remove non implemented cpu models ppc: drop caching ObjectClass from PowerPCCPUAlias ppc: simplify cpu model lookup by PVR ppc: replace inter-function cyclic dependency/recurssion with 2 simple lookups ppc: make cpu alias point only to real cpu models ppc: make cpu_model translation to type consistent ppc: use macros to make cpu type name from string literal target/ppc: Remove old STATUS file PPC: KVM: Support machine option to set VSMT mode spapr: fallback to raw mode if best compat mode cannot be set during CAS hw/nvram/spapr_nvram: Device can not be created by the users hw/ppc/spapr_cpu_core: Add a proper check for spapr machine ppc4xx: Export ECB and PLB emulation ppc4xx_i2c: Move to hw/i2c ppc4xx_i2c: QOMify ppc4xx: Split off 4xx I2C emulation from ppc405_uc to its own file ppc4xx: Make MAL emulation more generic ppc4xx: Move MAL from ppc405_uc to ppc4xx_devs spapr_iommu: Realloc guest visible TCE table when hot(un)plugging vfio-pci ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-08fw_cfg: rename read callbackMarc-André Lureau4-19/+22
The callback is called on select. Furthermore, the next patch introduced a new callback, so rename the function type with a generic name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08pci: add reserved slot check to do_pci_register_device()Mark Cave-Ayland2-3/+16
Add a new slot_reserved_mask bitmask to PCIBus indicating whether or not each PCI slot on the bus is reserved. Ensure that it is initialised to zero to maintain the existing behaviour that all slots are available by default, and add the additional check with appropriate error reporting to do_pci_register_device(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08pci: move check for existing devfn into new pci_bus_devfn_available() helperMark Cave-Ayland1-2/+8
Also touch up the logic in do_pci_register_device() accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08vmgenid: replace x-write-pointer-available hackMarc-André Lureau5-13/+13
This compat property sole function is to prevent the device from being instantiated. Instead of requiring an extra compat property, check if fw_cfg has DMA enabled. fw_cfg is a built-in device that is initialized very early by the machine init code. We have at least one other device that also assumes fw_cfg_find() can be safely used on realize: pvpanic. This has the additional benefit of handling other cases properly, like: $ qemu-system-x86_64 -device vmgenid -machine none qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide $ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.9 -global fw_cfg.dma_enabled=off qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide $ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.6 -global fw_cfg.dma_enabled=on [boots normally] Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08vhost-user-bridge: fix resume regression (since 2.9)Marc-André Lureau1-0/+7
Commit e10e798c85c2331 switched to libvhost-user which lacked support for resuming the avail_idx based on used_idx. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1485867 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08libvhost-user: support resuming vq->last_avail_idx based on used_idxMarc-André Lureau2-0/+20
This is the same workaround as commit 523b018dde3b765, which was lost with libvhost-user transition in commit e10e798c85c2331. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08acpi/vmgenid: change device category to miscYoni Bettan1-0/+1
Moved vmgenid from uncategorized to misc category in QEMU help menu Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08intel_iommu: fix missing BQL in pt fast pathPeter Xu1-0/+15
In vtd_switch_address_space() we did the memory region switch, however it's possible that the caller of it has not taken the BQL at all. Make sure we have it. CC: Paolo Bonzini <pbonzini@redhat.com> CC: Jason Wang <jasowang@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08docs: update documentation considering PCIE-PCI bridgeAleksandr Bezzubikov2-23/+140
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root PortAleksandr Bezzubikov2-0/+37
To enable hotplugging of a newly created pcie-pci-bridge, we need to tell firmware (e.g. SeaBIOS) to reserve additional buses or IO/MEM/PREF space for pcie-root-port. Additional bus reservation allows us to hotplug pcie-pci-bridge into this root port. The number of buses and IO/MEM/PREF space to reserve are provided to the device via a corresponding property, and to the firmware via new PCI capability. The properties' default values are -1 to keep default behavior unchanged. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: introduce bridge-only vendor-specific capability to provide some ↵Aleksandr Bezzubikov2-0/+71
hints to firmware On PCI init PCI bridges may need some extra info about bus number, IO, memory and prefetchable memory to reserve. QEMU can provide this with a special vendor-specific PCI capability. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: introduce pcie-pci-bridge deviceAleksandr Bezzubikov3-1/+194
Introduce a new PCIExpress-to-PCI Bridge device, which is a hot-pluggable PCI Express device and supports devices hot-plug with SHPC. This device is intended to replace the DMI-to-PCI Bridge. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen"Anthony PERARD1-8/+3
This reverts commit 153eba4726dfa1bdfc31d1fe973b2a61b9035492. This patch prevents PCI passthrough hotplug on Xen. Even if the Xen tool stack prepares its own ACPI tables, we still rely on QEMU for hotplug ACPI notifications. The original issue is fixed by the two previous patch: hw/acpi: Limit hotplug to root bus on legacy mode hw/acpi: Move acpi_set_pci_info to pcihp Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/acpi: Move acpi_set_pci_info to pcihpAnthony PERARD4-32/+45
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL being set on a PCI bus that supports ACPI hotplug. It should work regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen). So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation part from QEMU's ACPI table generator. To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs to be set, but this was done only when ACPI tables are built which is not needed for a Xen guest. The need for the property starts with commit "pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice" (f0c9d64a68b776374ec4732424a3e27753ce37b6). Adding find_i440fx into stubs so that mips-softmmu target can be built. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/acpi: Limit hotplug to root bus on legacy modeAnthony PERARD1-1/+1
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08pc: add 2.11 machine typesMarcel Apfelbaum3-5/+26
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08vhost: Release memory references on cleanupAlex Williamson1-0/+4
vhost registers a MemoryListener where it adds and removes references to MemoryRegions as the MemoryRegionSections pass through. The region_add callback is invoked for each existing section when the MemoryListener is registered, but unregistering the MemoryListener performs no reciprocal region_del callback. It's therefore the owner of the MemoryListener's responsibility to cleanup any persistent changes, such as these memory references, after unregistering. The consequence of this bug is that if we have both a vhost device and a vfio device, the vhost device will reference any mmap'd MMIO of the vfio device via this MemoryListener. If the vhost device is then removed, those references remain outstanding. If we then attempt to remove the vfio device, it never gets finalized and the only way to release the kernel file descriptors is to terminate the QEMU process. Fixes: dfde4e6e1a86 ("memory: add ref/unref calls") Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-stable@nongnu.org # v1.6.0+ Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell19-323/+304
staging # gpg: Signature made Fri 08 Sep 2017 03:00:34 BST # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: colo-compare: Update the COLO document to add the IOThread configuration colo-compare: Use IOThread to Check old packet regularly and Process pactkets of the primary qemu-iothread: IOThread supports the GMainContext event loop net/colo-compare.c: Fix comments and scheme net/colo-compare.c: Adjust net queue pop order for performance net/colo-compare.c: Optimize unpredictable tcp options comparison e1000: Rename the SEC symbol to SEQEC net/socket: Improve -net socket error reporting net/net: Convert parse_host_port() to Error net/socket: Convert several helper functions to Error net/socket: Don't treat odd socket type as SOCK_STREAM MAINTAINERS: Update mail address for COLO Proxy net: rtl8139: do not use old_mmio accesses net/rocker: Fix the unusual macro name net/rocker: Convert to realize() net/rocker: Plug memory leak in pci_rocker_init() net/rocker: Remove the dead error handling net/filter-rewriter.c: Fix rewirter checksum bug when use virtio-net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-08Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20170907' into stagingPeter Maydell25-972/+1412
TCG constant pools # gpg: Signature made Thu 07 Sep 2017 23:35:45 BST # gpg: using RSA key 0x64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20170907: (23 commits) tcg/ppc: Use constant pool for movi tcg/ppc: Look for shifted constants tcg/ppc: Change TCG_REG_RA to TCG_REG_TB tcg/arm: Use constant pool for call tcg/arm: Use constant pool for movi tcg/arm: Extract INSN_NOP tcg/arm: Code rearrangement tcg/arm: Tighten tlb indexing offset test tcg/arm: Improve tlb load for armv7 tcg/sparc: Use constant pool for movi tcg/sparc: Introduce TCG_REG_TB tcg/aarch64: Use constant pool for movi tcg/s390: Use constant pool for cmpi tcg/s390: Use constant pool for xori tcg/s390: Use constant pool for ori tcg/s390: Use constant pool for andi tcg/s390: Use constant pool for movi tcg/s390: Fix sign of patch_reloc addend tcg/s390: Introduce TCG_REG_TB tcg/i386: Store out-of-range call targets in constant pool ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-08Merge remote-tracking branch 'remotes/rth/tags/pull-pa-20170907' into stagingPeter Maydell1-446/+448
Conversion to TranslatorOps # gpg: Signature made Thu 07 Sep 2017 19:42:48 BST # gpg: using RSA key 0x64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-pa-20170907: target/hppa: Convert to TranslatorOps target/hppa: Convert to DisasContextBase target/hppa: Convert to DisasJumpType Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-08Merge remote-tracking branch 'remotes/rth/tags/pull-axp-20170907' into stagingPeter Maydell5-204/+180
Queued target/alpha patches # gpg: Signature made Thu 07 Sep 2017 19:17:22 BST # gpg: using RSA key 0x64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-axp-20170907: target/alpha: Switch to do_transaction_failed() hook target/alpha: Convert to TranslatorOps target/alpha: Convert to DisasContextBase target/alpha: Convert to DisasJumpType Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-14 19:17:23 +0000