1 files changed, 1 insertions, 91 deletions

diff --git a/hw/xfree86/common/xf86str.h b/hw/xfree86/common/xf86str.h
index a58fafebd..5e6e97778 100644
--- a/hw/xfree86/common/xf86str.h
+++ b/hw/xfree86/common/xf86str.h
@@ -41,6 +41,7 @@
 #include "colormapst.h"
 #include "xf86Module.h"
 #include "xf86Opt.h"
+#include "displaymode.h"
 
 /**
  * Integer type that is of the size of the addressable memory (machine size).
@@ -84,48 +85,6 @@ typedef enum {
     MODECHECK_FINAL = 1
 } ModeCheckFlags;
 
-/* These are possible return values for xf86CheckMode() and ValidMode() */
-typedef enum {
-    MODE_OK = 0,                /* Mode OK */
-    MODE_HSYNC,                 /* hsync out of range */
-    MODE_VSYNC,                 /* vsync out of range */
-    MODE_H_ILLEGAL,             /* mode has illegal horizontal timings */
-    MODE_V_ILLEGAL,             /* mode has illegal horizontal timings */
-    MODE_BAD_WIDTH,             /* requires an unsupported linepitch */
-    MODE_NOMODE,                /* no mode with a maching name */
-    MODE_NO_INTERLACE,          /* interlaced mode not supported */
-    MODE_NO_DBLESCAN,           /* doublescan mode not supported */
-    MODE_NO_VSCAN,              /* multiscan mode not supported */
-    MODE_MEM,                   /* insufficient video memory */
-    MODE_VIRTUAL_X,             /* mode width too large for specified virtual size */
-    MODE_VIRTUAL_Y,             /* mode height too large for specified virtual size */
-    MODE_MEM_VIRT,              /* insufficient video memory given virtual size */
-    MODE_NOCLOCK,               /* no fixed clock available */
-    MODE_CLOCK_HIGH,            /* clock required is too high */
-    MODE_CLOCK_LOW,             /* clock required is too low */
-    MODE_CLOCK_RANGE,           /* clock/mode isn't in a ClockRange */
-    MODE_BAD_HVALUE,            /* horizontal timing was out of range */
-    MODE_BAD_VVALUE,            /* vertical timing was out of range */
-    MODE_BAD_VSCAN,             /* VScan value out of range */
-    MODE_HSYNC_NARROW,          /* horizontal sync too narrow */
-    MODE_HSYNC_WIDE,            /* horizontal sync too wide */
-    MODE_HBLANK_NARROW,         /* horizontal blanking too narrow */
-    MODE_HBLANK_WIDE,           /* horizontal blanking too wide */
-    MODE_VSYNC_NARROW,          /* vertical sync too narrow */
-    MODE_VSYNC_WIDE,            /* vertical sync too wide */
-    MODE_VBLANK_NARROW,         /* vertical blanking too narrow */
-    MODE_VBLANK_WIDE,           /* vertical blanking too wide */
-    MODE_PANEL,                 /* exceeds panel dimensions */
-    MODE_INTERLACE_WIDTH,       /* width too large for interlaced mode */
-    MODE_ONE_WIDTH,             /* only one width is supported */
-    MODE_ONE_HEIGHT,            /* only one height is supported */
-    MODE_ONE_SIZE,              /* only one resolution is supported */
-    MODE_NO_REDUCED,            /* monitor doesn't accept reduced blanking */
-    MODE_BANDWIDTH,             /* mode requires too much memory bandwidth */
-    MODE_BAD = -2,              /* unspecified reason */
-    MODE_ERROR = -1             /* error condition */
-} ModeStatus;
-
 /*
  * The mode sets are, from best to worst: USERDEF, DRIVER, and DEFAULT/BUILTIN.
  * Preferred will bubble a mode to the top within a set.
@@ -141,54 +100,6 @@ typedef enum {
 #define M_T_DRIVER  0x40        /* Supplied by the driver (EDID, etc) */
 #define M_T_USERPREF 0x80       /* mode preferred by the user config */
 
-/* Video mode */
-typedef struct _DisplayModeRec {
-    struct _DisplayModeRec *prev;
-    struct _DisplayModeRec *next;
-    const char *name;           /* identifier for the mode */
-    ModeStatus status;
-    int type;
-
-    /* These are the values that the user sees/provides */
-    int Clock;                  /* pixel clock freq (kHz) */
-    int HDisplay;               /* horizontal timing */
-    int HSyncStart;
-    int HSyncEnd;
-    int HTotal;
-    int HSkew;
-    int VDisplay;               /* vertical timing */
-    int VSyncStart;
-    int VSyncEnd;
-    int VTotal;
-    int VScan;
-    int Flags;
-
-    /* These are the values the hardware uses */
-    int ClockIndex;
-    int SynthClock;             /* Actual clock freq to
-                                 * be programmed  (kHz) */
-    int CrtcHDisplay;
-    int CrtcHBlankStart;
-    int CrtcHSyncStart;
-    int CrtcHSyncEnd;
-    int CrtcHBlankEnd;
-    int CrtcHTotal;
-    int CrtcHSkew;
-    int CrtcVDisplay;
-    int CrtcVBlankStart;
-    int CrtcVSyncStart;
-    int CrtcVSyncEnd;
-    int CrtcVBlankEnd;
-    int CrtcVTotal;
-    Bool CrtcHAdjusted;
-    Bool CrtcVAdjusted;
-    int PrivSize;
-    INT32 *Private;
-    int PrivFlags;
-
-    float HSync, VRefresh;
-} DisplayModeRec, *DisplayModePtr;
-
 /* The monitor description */
 
 #define MAX_HSYNC 8
@@ -377,7 +288,6 @@ typedef struct _bus {
     } id;
 } BusRec, *BusPtr;
 
-#define MAXCLOCKS   128
 typedef enum {
     DAC_BPP8 = 0,
     DAC_BPP16,