path: root/src/gfx/vid_1400.c

/* $XFree86$ */
/*-----------------------------------------------------------------------------
 * VID_1400.C
 *
 * Version 2.0 - February 21, 2000
 *
 * This file contains routines to control the SC1400 video overlay hardware.
 *
 * History:
 *    Versions 0.1 through 2.0 by Brian Falardeau.
 *
 * Copyright (c) 1999-2000 National Semiconductor.
 *-----------------------------------------------------------------------------
 */

/*----------------------------------------------------------------------------
 * SC1400 PLL TABLE
 *----------------------------------------------------------------------------
 */

typedef struct tagSC1400PLL
{
   long frequency;			/* 16.16 fixed point frequency */
   unsigned long clock_select;		/* clock select register (0x2C) */
}
SC1400PLL;

SC1400PLL gfx_sc1400_clock_table[] = {
   {0x00192CCC, 0x00000000},		/*  25.1750 */
   {0x001C526E, 0x00010000},		/*  28.3220 */
   {0x001F8000, 0x00020000},		/*  31.5000 */
   {0x00240000, 0x000E0000},		/*  36.0000 */
   {0x00258000, 0x0010110C},		/*  37.5000 */
   {0x00280000, 0x00040000},		/*  40.0000 */
   {0x002CE666, 0x00090000},		/*  44.9000 */
   {0x00320000, 0x00100C06},		/*  50.0000 */
   {0x00325999, 0x0050600C},		/*  50.3500 */
   {0x00360000, 0x00100100},		/*  54.0000 */
   {0x0038643F, 0x0010160A},		/*  56.3916 */
   {0x0038A3D7, 0x00506C0C},		/*  56.6440 */
   {0x003B0000, 0x0010170A},		/*  59.6583 */
   {0x003BA886, 0x00100A04},		/*  59.6583 */
   {0x003F0000, 0x00100602},		/*  63.0000 */
   {0x00410000, 0x00060000},		/*  65.0000 */
   {0x00438000, 0x00100401},		/*  67.5000 */
   {0x0046CCCC, 0x00101407},		/*  70.8000 */
   {0x00480000, 0x00100702},		/*  72.0000 */
   {0x004B0000, 0x00070000},		/*  75.0000 */
   {0x004EC000, 0x0010220B},		/*  78.7500 */
   {0x00500000, 0x00304C0C},		/*  80.0000 */
   {0x00510000, 0x00100200},		/*  81.0000 */
   {0x00550000, 0x00080000},		/*  85.0000 */
   {0x0059CCCC, 0x00100902},		/*  89.8000 */
   {0x00630000, 0x00100A02},		/*  99.0000 */
   {0x00640000, 0x00102409},		/* 100.0000 */
   {0x006C0000, 0x00100300},		/* 108.0000 */
   {0x00870000, 0x00050000},		/* 135.0000 */
   {0x009D8000, 0x00102205},		/* 157.5000 */
   {0x00A20000, 0x00100500},		/* 162.0000 */
   {0x00AA0000, 0x000B0000},		/* 170.0000 */
   {0x00AF0000, 0x00100C01},		/* 175.0000 */
   {0x00BD0000, 0x00100600},		/* 189.0000 */
   {0x00CA0000, 0x00100E01},		/* 202.0000 */
   {0x00E80000, 0x00102A04},		/* 232.0000 */
};

#define NUM_SC1400_FREQUENCIES sizeof(gfx_sc1400_clock_table)/sizeof(SC1400PLL)

/*---------------------------------------------------------------------------
 * gfx_reset_video (PRIVATE ROUTINE: NOT PART OF DURANGO API)
 *
 * This routine is used to disable all components of video overlay before
 * performing a mode switch.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
void
sc1400_reset_video(void)
#else
void
gfx_reset_video(void)
#endif
{
   gfx_set_video_enable(0);
}

/*---------------------------------------------------------------------------
 * gfx_set_clock_frequency
 *
 * This routine sets the clock frequency, specified as a 16.16 fixed point
 * value (0x00318000 = 49.5 MHz).  It will set the closest frequency found
 * in the lookup table.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
void
sc1400_set_clock_frequency(unsigned long frequency)
#else
void
gfx_set_clock_frequency(unsigned long frequency)
#endif
{
   int index;
   unsigned long value;
   long min, diff;

   /* FIND THE REGISTER VALUES FOR THE DESIRED FREQUENCY */
   /* Search the table for the closest frequency (16.16 format). */

   value = gfx_sc1400_clock_table[0].clock_select;
   min = (long)gfx_sc1400_clock_table[0].frequency - frequency;
   if (min < 0L)
      min = -min;
   for (index = 1; index < NUM_SC1400_FREQUENCIES; index++) {
      diff = (long)gfx_sc1400_clock_table[index].frequency - frequency;
      if (diff < 0L)
	 diff = -diff;
      if (diff < min) {
	 min = diff;
	 value = gfx_sc1400_clock_table[index].clock_select;
      }
   }

   /* SET THE DOT CLOCK REGISTER */

   WRITE_VID32(SC1400_VID_MISC, 0x00001000);
   WRITE_VID32(SC1400_VID_CLOCK_SELECT, value);
   return;
}

/*-----------------------------------------------------------------------------
 * gfx_set_video_enable
 *
 * This routine enables or disables the video overlay functionality.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_set_video_enable(int enable)
#else
int
gfx_set_video_enable(int enable)
#endif
{
   unsigned long vcfg;

   /* WAIT FOR VERTICAL BLANK TO START */
   /* Otherwise a glitch can be observed. */

   if (gfx_test_timing_active()) {
      if (!gfx_test_vertical_active()) {
	 while (!gfx_test_vertical_active()) ;
      }
      while (gfx_test_vertical_active()) ;
   }
   vcfg = READ_VID32(SC1400_VIDEO_CONFIG);
   if (enable) {
      /* ENABLE VIDEO OVERLAY FROM DISPLAY CONTROLLER */
      /* Use private routine to abstract the display controller. */

      gfx_set_display_video_enable(1);

      /* SET SC1400 BUS CONTROL PARAMETERS */
      /* Currently always high speed, 8-bit interface. */

      vcfg |= SC1400_VCFG_HIGH_SPD_INT;
      vcfg &= ~(SC1400_VCFG_EARLY_VID_RDY | SC1400_VCFG_16_BIT_EN);

      /* ENABLE SC1400 VIDEO OVERLAY */

      vcfg |= SC1400_VCFG_VID_EN;
      WRITE_VID32(SC1400_VIDEO_CONFIG, vcfg);
   } else {
      /* DISABLE SC1400 VIDEO OVERLAY */

      vcfg &= ~SC1400_VCFG_VID_EN;
      WRITE_VID32(SC1400_VIDEO_CONFIG, vcfg);

      /* DISABLE VIDEO OVERLAY FROM DISPLAY CONTROLLER */
      /* Use private routine to abstract the display controller. */

      gfx_set_display_video_enable(0);
   }
   return (0);
}

/*-----------------------------------------------------------------------------
 * gfx_set_video_format
 *
 * Currently only sets 4:2:0 format, Y1 V Y0 U.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_set_video_format(unsigned long format)
#else
int
gfx_set_video_format(unsigned long format)
#endif
{
   unsigned long vcfg = 0;

   /* SET THE SC1400 VIDEO INPUT FORMAT */

   vcfg = READ_VID32(SC1400_VIDEO_CONFIG);
   vcfg &= ~(SC1400_VCFG_VID_INP_FORMAT | SC1400_VCFG_4_2_0_MODE);
   vcfg &= ~(SC1400_VCFG_CSC_BYPASS);
   if (format < 4)
      vcfg |= (format << 2);
   else
      vcfg |= SC1400_VCFG_CSC_BYPASS;
   WRITE_VID32(SC1400_VIDEO_CONFIG, vcfg);
   return (0);
}

/*-----------------------------------------------------------------------------
 * gfx_set_video_size
 *
 * This routine specifies the size of the source data.  It is used only 
 * to determine how much data to transfer per frame, and is not used to 
 * calculate the scaling value (that is handled by a separate routine).
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_set_video_size(unsigned short width, unsigned short height)
#else
int
gfx_set_video_size(unsigned short width, unsigned short height)
#endif
{
   unsigned long size, vcfg;

   /* SET THE SC1400 VIDEO LINE SIZE */

   vcfg = READ_VID32(SC1400_VIDEO_CONFIG);
   vcfg &= ~(SC1400_VCFG_LINE_SIZE_LOWER_MASK | SC1400_VCFG_LINE_SIZE_UPPER);
   size = (width >> 1);
   vcfg |= (size & 0x00FF) << 8;
   if (size & 0x0100)
      vcfg |= SC1400_VCFG_LINE_SIZE_UPPER;
   WRITE_VID32(SC1400_VIDEO_CONFIG, vcfg);

   /* SET TOTAL VIDEO BUFFER SIZE IN DISPLAY CONTROLLER */
   /* Use private routine to abstract the display controller. */

   gfx_set_display_video_size(width, height);
   return (0);
}

/*-----------------------------------------------------------------------------
 * gfx_set_video_offset
 *
 * This routine sets the starting offset for the video buffer when only 
 * one offset needs to be specified.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_set_video_offset(unsigned long offset)
#else
int
gfx_set_video_offset(unsigned long offset)
#endif
{
   /* SAVE VALUE FOR FUTURE CLIPPING OF THE TOP OF THE VIDEO WINDOW */

   gfx_vid_offset = offset;

   /* SET VIDEO BUFFER OFFSET IN DISPLAY CONTROLLER */
   /* Use private routine to abstract the display controller. */

   gfx_set_display_video_offset(offset);
   return (0);
}

/*---------------------------------------------------------------------------
 * gfx_set_video_scale
 * 
 * This routine sets the scale factor for the video overlay window.  The 
 * size of the source and destination regions are specified in pixels.  
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_set_video_scale(unsigned short srcw, unsigned short srch,
		       unsigned short dstw, unsigned short dsth)
#else
int
gfx_set_video_scale(unsigned short srcw, unsigned short srch,
		    unsigned short dstw, unsigned short dsth)
#endif
{
   unsigned long xscale, yscale;

   /* SAVE PARAMETERS */
   /* These are needed for clipping the video window later. */

   gfx_vid_srcw = srcw;
   gfx_vid_srch = srch;
   gfx_vid_dstw = dstw;
   gfx_vid_dsth = dsth;

   /* CALCULATE SC1400 SCALE FACTORS */
   /* No downscaling in SC1400 so force to 1x if attempted. */

   if (srcw < dstw)
      xscale = (0x2000 * (srcw - 1)) / (dstw - 1);
   else
      xscale = 0x1FFF;
   if (srch < dsth)
      yscale = (0x2000 * (srch - 1)) / (dsth - 1);
   else
      yscale = 0x1FFF;
   WRITE_VID32(SC1400_VIDEO_SCALE, (yscale << 16) | xscale);

   /* CALL ROUTINE TO UPDATE WINDOW POSITION */
   /* This is required because the scale values effect the number of */
   /* source data pixels that need to be clipped, as well as the */
   /* amount of data that needs to be transferred. */

   gfx_set_video_window(gfx_vid_xpos, gfx_vid_ypos, gfx_vid_width,
			gfx_vid_height);
   return (0);
}

/*---------------------------------------------------------------------------
 * gfx_set_video_window
 * 
 * This routine sets the position and size of the video overlay window.  The 
 * position is specified in screen relative coordinates, and may be negative.  
 * The size of destination region is specified in pixels.  The line size
 * indicates the number of bytes of source data per scanline.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_set_video_window(short x, short y, unsigned short w, unsigned short h)
#else
int
gfx_set_video_window(short x, short y, unsigned short w, unsigned short h)
#endif
{
   unsigned long vcfg = 0;
   unsigned long hadjust, vadjust;
   unsigned long initread;
   unsigned long xstart, ystart, xend, yend;
   unsigned long offset, line_size;

   /* SAVE PARAMETERS */
   /* These are needed to call this routine if the scale value changes. */

   gfx_vid_xpos = x;
   gfx_vid_ypos = y;
   gfx_vid_width = w;
   gfx_vid_height = h;

   /* GET ADJUSTMENT VALUES */
   /* Use routines to abstract version of display controller. */

   hadjust = gfx_get_htotal() - gfx_get_hsync_end() - 13;
   vadjust = gfx_get_vtotal() - gfx_get_vsync_end() + 1;

   if (x > 0) {
      /* NO CLIPPING ON LEFT */

      xstart = x + hadjust;
      initread = 0;
   } else {
      /* CLIPPING ON LEFT */
      /* Adjust initial read for scale, checking for divide by zero */

      xstart = hadjust;
      initread = -x;
      if (gfx_vid_dstw)
	 initread = ((-x) * gfx_vid_srcw) / gfx_vid_dstw;
      else
	 initread = 0;
   }

   /* CLIPPING ON RIGHT */

   xend = x + w;
   if (xend > gfx_get_hactive())
      xend = gfx_get_hactive();
   xend += hadjust;

   /* CLIPPING ON TOP */

   offset = gfx_vid_offset;
   if (y >= 0) {
      ystart = y + vadjust;
   } else {
      ystart = vadjust;
      line_size = (READ_VID32(SC1400_VIDEO_CONFIG) >> 7) & 0x000001FE;
      if (READ_VID32(SC1400_VIDEO_CONFIG) & SC1400_VCFG_LINE_SIZE_UPPER)
	 line_size += 512;
      if (gfx_vid_dsth)
	 offset = gfx_vid_offset + (line_size << 1) *
	       (((-y) * gfx_vid_srch) / gfx_vid_dsth);
   }

   /* CLIPPING ON BOTTOM */

   yend = y + h;
   if (yend >= gfx_get_vactive())
      yend = gfx_get_vactive();
   yend += vadjust;

   /* SET VIDEO BUFFER OFFSET IN DISPLAY CONTROLLER */
   /* Use private routine to abstract the display controller. */

   gfx_set_display_video_offset(offset);

   /* DISABLE REGISTER UPDATES */

   vcfg = READ_VID32(SC1400_VIDEO_CONFIG);
   vcfg &= ~SC1400_VCFG_VID_REG_UPDATE;
   WRITE_VID32(SC1400_VIDEO_CONFIG, vcfg);

   /* SET VIDEO POSITION */

   WRITE_VID32(SC1400_VIDEO_X_POS, (xend << 16) | xstart);
   WRITE_VID32(SC1400_VIDEO_Y_POS, (yend << 16) | ystart);

   /* SET INITIAL READ ADDRESS AND ENABLE REGISTER UPDATES */

   vcfg &= ~SC1400_VCFG_INIT_READ_MASK;
   vcfg |= (initread << 15) & SC1400_VCFG_INIT_READ_MASK;
   vcfg |= SC1400_VCFG_VID_REG_UPDATE;
   WRITE_VID32(SC1400_VIDEO_CONFIG, vcfg);
   return (0);
}

/*---------------------------------------------------------------------------
 * gfx_set_video_color_key
 * 
 * This routine specifies the color key value and mask for the video overlay
 * hardware.  To disable color key, the color and mask should both be set to 
 * zero.  The hardware uses the color key in the following equation:
 *
 * ((source data) & (color key mask)) == ((color key) & (color key mask))
 *
 * The source data can be either graphics data or video data.  The bluescreen
 * parameter is set to have the hardware compare video data and clear to
 * comapare graphics data.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_set_video_color_key(unsigned long key, unsigned long mask,
			   int graphics)
#else
int
gfx_set_video_color_key(unsigned long key, unsigned long mask, int graphics)
#endif
{
   unsigned long dcfg = 0;

   /* SET SC1400 COLOR KEY VALUE */

   WRITE_VID32(SC1400_VIDEO_COLOR_KEY, key);
   WRITE_VID32(SC1400_VIDEO_COLOR_MASK, mask);

   /* SELECT GRAPHICS OR VIDEO DATA TO COMPARE TO THE COLOR KEY */

   dcfg = READ_VID32(SC1400_DISPLAY_CONFIG);
   if (graphics & 0x01)
      dcfg &= ~SC1400_DCFG_VG_CK;
   else
      dcfg |= SC1400_DCFG_VG_CK;
   WRITE_VID32(SC1400_DISPLAY_CONFIG, dcfg);
   return (0);
}

/*---------------------------------------------------------------------------
 * gfx_set_video_filter
 * 
 * This routine enables or disables the video overlay filters.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_set_video_filter(int xfilter, int yfilter)
#else
int
gfx_set_video_filter(int xfilter, int yfilter)
#endif
{
   unsigned long vcfg = 0;

   /* ENABLE OR DISABLE SC1400 VIDEO OVERLAY FILTERS */

   vcfg = READ_VID32(SC1400_VIDEO_CONFIG);
   vcfg &= ~(SC1400_VCFG_X_FILTER_EN | SC1400_VCFG_Y_FILTER_EN);
   if (xfilter)
      vcfg |= SC1400_VCFG_X_FILTER_EN;
   if (yfilter)
      vcfg |= SC1400_VCFG_Y_FILTER_EN;
   WRITE_VID32(SC1400_VIDEO_CONFIG, vcfg);
   return (0);
}

/*---------------------------------------------------------------------------
 * gfx_set_video_palette
 * 
 * This routine loads the video hardware palette.  If a NULL pointer is 
 * specified, the palette is bypassed (for SC1400, this means loading the 
 * palette with identity values). 
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_set_video_palette(unsigned long *palette)
#else
int
gfx_set_video_palette(unsigned long *palette)
#endif
{
   unsigned long i, entry;

   /* LOAD SC1400 VIDEO PALETTE */

   WRITE_VID32(SC1400_PALETTE_ADDRESS, 0);
   for (i = 0; i < 256; i++) {
      if (palette)
	 entry = palette[i];
      else
	 entry = i | (i << 8) | (i << 16);
      WRITE_VID32(SC1400_PALETTE_DATA, entry);
   }
   return (0);
}

/*************************************************************/
/*  READ ROUTINES  |  INCLUDED FOR DIAGNOSTIC PURPOSES ONLY  */
/*************************************************************/

#if GFX_READ_ROUTINES

/*---------------------------------------------------------------------------
 * gfx_get_sync_polarities
 *
 * This routine returns the polarities of the sync pulses:
 *     Bit 0: Set if negative horizontal polarity.
 *     Bit 1: Set if negative vertical polarity.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_get_sync_polarities(void)
#else
int
gfx_get_sync_polarities(void)
#endif
{
   int polarities = 0;

   if (READ_VID32(SC1400_DISPLAY_CONFIG) & 0x00000100)
      polarities |= 1;
   if (READ_VID32(SC1400_DISPLAY_CONFIG) & 0x00000200)
      polarities |= 2;
   return (polarities);
}

/*-----------------------------------------------------------------------------
 * gfx_get_video_enable
 *
 * This routine returns the value "one" if video overlay is currently enabled,
 * otherwise it returns the value "zero".
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_get_video_enable(void)
#else
int
gfx_get_video_enable(void)
#endif
{
   if (READ_VID32(SC1400_VIDEO_CONFIG) & SC1400_VCFG_VID_EN)
      return (1);
   return (0);
}

/*-----------------------------------------------------------------------------
 * gfx_get_video_format
 *
 * This routine returns the current video overlay format.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_get_video_format(void)
#else
int
gfx_get_video_format(void)
#endif
{
   unsigned long vcfg;

   vcfg = READ_VID32(SC1400_VIDEO_CONFIG);
   if (vcfg & SC1400_VCFG_CSC_BYPASS)
      return (4);
   else
      return ((vcfg >> 2) & 3);
}

/*-----------------------------------------------------------------------------
 * gfx_get_video_src_size
 *
 * This routine returns the size of the source video overlay buffer.  The 
 * return value is (height << 16) | width.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_video_src_size(void)
#else
unsigned long
gfx_get_video_src_size(void)
#endif
{
   unsigned long width = 0, height = 0;

   /* DETERMINE SOURCE WIDTH FROM THE SC1400 VIDEO LINE SIZE */

   width = (READ_VID32(SC1400_VIDEO_CONFIG) >> 7) & 0x000001FE;
   if (READ_VID32(SC1400_VIDEO_CONFIG) & SC1400_VCFG_LINE_SIZE_UPPER)
      width += 512;

   if (width) {
      /* DETERMINE HEIGHT BY DIVIDING TOTAL SIZE BY WIDTH */
      /* Get total size from display controller - abtracted. */

      height = gfx_get_display_video_size() / (width << 1);
   }
   return ((height << 16) | width);
}

/*-----------------------------------------------------------------------------
 * gfx_get_video_line_size
 *
 * This routine returns the line size of the source video overlay buffer, in 
 * pixels.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_video_line_size(void)
#else
unsigned long
gfx_get_video_line_size(void)
#endif
{
   unsigned long width = 0;

   /* DETERMINE SOURCE WIDTH FROM THE SC1400 VIDEO LINE SIZE */

   width = (READ_VID32(SC1400_VIDEO_CONFIG) >> 7) & 0x000001FE;
   if (READ_VID32(SC1400_VIDEO_CONFIG) & SC1400_VCFG_LINE_SIZE_UPPER)
      width += 512;
   return (width);
}

/*-----------------------------------------------------------------------------
 * gfx_get_video_xclip
 *
 * This routine returns the number of bytes clipped on the left side of a 
 * video overlay line (skipped at beginning).
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_video_xclip(void)
#else
unsigned long
gfx_get_video_xclip(void)
#endif
{
   unsigned long clip = 0;

   /* DETERMINE SOURCE WIDTH FROM THE SC1400 VIDEO LINE SIZE */

   clip = (READ_VID32(SC1400_VIDEO_CONFIG) >> 14) & 0x000007FC;
   return (clip);
}

/*-----------------------------------------------------------------------------
 * gfx_get_video_offset
 *
 * This routine returns the current offset for the video overlay buffer.
 *-----------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_video_offset(void)
#else
unsigned long
gfx_get_video_offset(void)
#endif
{
   return (gfx_get_display_video_offset());
}

/*---------------------------------------------------------------------------
 * gfx_get_video_scale
 * 
 * This routine returns the scale factor for the video overlay window.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_video_scale(void)
#else
unsigned long
gfx_get_video_scale(void)
#endif
{
   return (READ_VID32(SC1400_VIDEO_SCALE));
}

/*---------------------------------------------------------------------------
 * gfx_get_video_dst_size
 * 
 * This routine returns the size of the displayed video overlay window.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_video_dst_size(void)
#else
unsigned long
gfx_get_video_dst_size(void)
#endif
{
   unsigned long xsize, ysize;

   xsize = READ_VID32(SC1400_VIDEO_X_POS);
   xsize = ((xsize >> 16) & 0x3FF) - (xsize & 0x03FF);
   ysize = READ_VID32(SC1400_VIDEO_Y_POS);
   ysize = ((ysize >> 16) & 0x3FF) - (ysize & 0x03FF);
   return ((ysize << 16) | xsize);
}

/*---------------------------------------------------------------------------
 * gfx_get_video_position
 * 
 * This routine returns the position of the video overlay window.  The
 * return value is (ypos << 16) | xpos.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_video_position(void)
#else
unsigned long
gfx_get_video_position(void)
#endif
{
   unsigned long hadjust, vadjust;
   unsigned long xpos, ypos;

   /* READ HARDWARE POSITION */

   xpos = READ_VID32(SC1400_VIDEO_X_POS) & 0x000003FF;
   ypos = READ_VID32(SC1400_VIDEO_Y_POS) & 0x000003FF;

   /* GET ADJUSTMENT VALUES */
   /* Use routines to abstract version of display controller. */

   hadjust = gfx_get_htotal() - gfx_get_hsync_end() - 13;
   vadjust = gfx_get_vtotal() - gfx_get_vsync_end() + 1;
   xpos -= hadjust;
   ypos -= vadjust;
   return ((ypos << 16) | (xpos & 0x0000FFFF));
}

/*---------------------------------------------------------------------------
 * gfx_get_video_color_key
 * 
 * This routine returns the current video color key value.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_video_color_key(void)
#else
unsigned long
gfx_get_video_color_key(void)
#endif
{
   return (READ_VID32(SC1400_VIDEO_COLOR_KEY));
}

/*---------------------------------------------------------------------------
 * gfx_get_video_color_key_mask
 * 
 * This routine returns the current video color mask value.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_video_color_key_mask(void)
#else
unsigned long
gfx_get_video_color_key_mask(void)
#endif
{
   return (READ_VID32(SC1400_VIDEO_COLOR_MASK));
}

/*---------------------------------------------------------------------------
 * gfx_get_video_color_key_src
 * 
 * This routine returns 0 for video data compare, 1 for graphics data.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_get_video_color_key_src(void)
#else
int
gfx_get_video_color_key_src(void)
#endif
{
   if (READ_VID32(SC1400_DISPLAY_CONFIG) & SC1400_DCFG_VG_CK)
      return (0);
   return (1);
}

/*---------------------------------------------------------------------------
 * gfx_get_video_filter
 * 
 * This routine returns if the filters are currently enabled.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
int
sc1400_get_video_filter(void)
#else
int
gfx_get_video_filter(void)
#endif
{
   int retval = 0;

   if (READ_VID32(SC1400_VIDEO_CONFIG) & SC1400_VCFG_X_FILTER_EN)
      retval |= 1;
   if (READ_VID32(SC1400_VIDEO_CONFIG) & SC1400_VCFG_Y_FILTER_EN)
      retval |= 2;
   return (retval);
}

/*---------------------------------------------------------------------------
 * gfx_get_clock_frequency
 *
 * This routine returns the current clock frequency in 16.16 format.
 * It reads the current register value and finds the match in the table.
 * If no match is found, this routine returns 0.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_get_clock_frequency(void)
#else
unsigned long
gfx_get_clock_frequency(void)
#endif
{
   int index;
   unsigned long value, mask;

   mask = 0x007FFF0F;
   value = READ_VID32(SC1400_VID_CLOCK_SELECT) & mask;
   for (index = 0; index < NUM_SC1400_FREQUENCIES; index++) {
      if ((gfx_sc1400_clock_table[index].clock_select & mask) == value)
	 return (gfx_sc1400_clock_table[index].frequency);
   }
   return (0);
}

/*---------------------------------------------------------------------------
 * gfx_read_crc
 *
 * This routine returns the hardware CRC value, which is used for automated 
 * testing.  The value is like a checksum, but will change if pixels move
 * locations.
 *---------------------------------------------------------------------------
 */
#if GFX_VIDEO_DYNAMIC
unsigned long
sc1400_read_crc(void)
#else
unsigned long
gfx_read_crc(void)
#endif
{
   unsigned long crc = 0xFFFFFFFF;

   if (gfx_test_timing_active()) {
      // WAIT UNTIL ACTIVE DISPLAY

      while (!gfx_test_vertical_active()) ;

      // RESET CRC DURING ACTIVE DISPLAY

      WRITE_VID32(SC1400_VID_CRC, 0);
      WRITE_VID32(SC1400_VID_CRC, 1);

      // WAIT UNTIL NOT ACTIVE, THEN ACTIVE, NOT ACTIVE, THEN ACTIVE

      while (gfx_test_vertical_active()) ;
      while (!gfx_test_vertical_active()) ;
      while (gfx_test_vertical_active()) ;
      while (!gfx_test_vertical_active()) ;
      crc = READ_VID32(SC1400_VID_CRC) >> 8;
   }
   return (crc);
}

#endif /* GFX_READ_ROUTINES */

/* END OF FILE */