.\" shorthand for double quote that works everywhere.
.ds q \N'34'
.TH armsoc  __drivermansuffix__ __vendorversion__
.SH NAME
armsoc \- Arm SoC graphics
.SH SYNOPSIS
.nf
.B "Section \*qDevice\*q"
.BI "  Identifier \*q"  devname \*q
.B  "  Driver \*qarmsoc\*q"
\ \ ...
.B EndSection
.fi
.SH DESCRIPTION
.B armsoc
is an __xservername__ driver for Arm Mali SoCs.
.SH SUPPORTED HARDWARE
.B armsoc
supports the Mali-T400 & Mali-T60x

.SH CONFIGURATION DETAILS
Please refer to __xconfigfile__(__filemansuffix__) for general configuration
details.  This section only covers configuration details specific to this
driver.
.PP
The following driver
.B Options
are supported
.TP
.BI "Option \*qDebug\*q \*q" boolean \*q
Enable debug logging.
.IP
Default: Debug logging is Disabled
.TP
.BI "Option \*qNoFlip\*q \*q" boolean \*q
Disable buffer flipping.
.IP
Default: Flipping is Enabled
.TP
.BI "Option \*qDriverName\*q \*q" string \*q
The name of the drm driver to use.
.IP
Default: NULL
.TP
.BI "Option \*qBusID\*q \*q" string \*q
The Bus ID of the drm device to use.
.IP
Default: NULL
.TP
.BI "Option \*qDRICard\*q \*q" integer \*q
Select which dri card to use.
.IP
Default: 0
.TP
.BI "Option \*qInitFromFBDev\*q \*q" string \*q
Specifies an fbdev device node (such as "/dev/fb0") to use to initialize the
DRM scanout buffer. Specifying this option only makes sense (and is required)
when X is started with the parameter "-background none".

The InitFromFBDev functionality is limited to when the fbdev device pixel
format matches the format of the X screen. This includes bits-per-pixel and RGB
ordering and size. If the driver is unable to copy from the fbdev device then
an error will be logged, and the -background none functionality will be
disabled.
.IP
Default: NULL
.TP
.BI "Option \*qUMP_LOCK\*q \*q" boolean \*q
Use the umplock module for cross-process access synchronization. It should be only enabled for Mali400
.IP
Default: Umplock is Disabled

.SH DRM DEVICE SELECTION

Either the DRM driver name or bus ID can be specified using e.g.

.nf
.B "Section \*qDevice\*q"
.BI "  Driver \*qarmsoc\*q"
.BI "  Option \*qDriverName\*q \*qpl111_drm\*q"
.B "EndSection"

or

.B "Section \*qDevice\*q"
.BI "  Driver \*qarmsoc\*q"
.BI "  Option \*qBusID\*q      \*qplatform:pl111_drm:00\*q"
.B "EndSection"

If neither of these are set then /dev/dri/card0 is used. In this case
the card number can be set using the \*qDRICard\*q option.

.B "Section \*qDevice\*q"
.BI "  Driver \*qarmsoc\*q"
.BI "  Option \*qDRICard\*q      \*q1\*q"
.B "EndSection"

.SH OUTPUT CONFIGURATION

The driver supports runtime configuration of detected outputs.  You can use the
.B xrandr
tool to control outputs on the command line as follows:

.RS
.B xrandr \-\-output
.I output
.B \-\-set
.I property value
.RE

Note that you may need to quote property and value arguments that contain spaces.
Each output listed below may have one or more properties associated
with it (like a binary EDID block if one is found).  Some outputs have
unique properties which are described below.  See the "MULTIHEAD
CONFIGURATIONS" section below for additional information.

TODO

.PP
See __xconfigfile__(__filemansuffix__) for information on associating Monitor
sections with these outputs for configuration.  Associating Monitor sections
with each output can be helpful if you need to ignore a specific output, for
example, or statically configure an extended desktop monitor layout.

.SH MULTIHEAD CONFIGURATIONS

The number of independent outputs is dictated by the number of CRTCs
(in X parlance) a given chip supports. The actual number of displays
supported will depend on the board.  But a built-in LCD and
external HDMI are a common configuration. 

You can use the "xrandr" tool, or various desktop utilities, to change
your output configuration at runtime.  To statically configure your
outputs, you can use the "Monitor-<type>" options along with
additional monitor sections in your xorg.conf to create your screen
topology.  The example below puts the VGA output to the right of the
builtin laptop screen, both running at 1024x768.

.nf
.B "Section \*qMonitor\*q"
.BI "  Identifier \*qLaptop FooBar Internal Display\*q"
.BI "  Option \*qPosition\*q \*q0 0\*q"
.B "EndSection"

.B "Section \*qMonitor\*q"
.BI "  Identifier \*qSome Random CRT\*q"
.BI "  Option \*qPosition\*q \*q1024 0\*q"
.BI "  Option \*qRightOf\*q \*qLaptop FoodBar Internal Display\*q"
.B "EndSection"

.B "Section \*qDevice\*q"
.BI "  Driver \*qarmsoc\*q"
.BI "  Option \*qmonitor-LVDS\*q \*qLaptop FooBar Internal Display\*q"
.BI "  Option \*qmonitor-VGA\*q \*qSome Random CRT\*q"
.B "EndSection"
        
.SH "SEE ALSO"
__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__)
.SH AUTHORS
Authors include: Ian Elliott, Rob Clark.