summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorKaleb Keithley <kaleb@freedesktop.org>2003-11-14 15:54:49 +0000
committerKaleb Keithley <kaleb@freedesktop.org>2003-11-14 15:54:49 +0000
commit95b194f6e3456b46c2f994f4f6655fabfcf89c76 (patch)
tree8efcac1f7ed9168dc88abfc729bb66997f263f9f
R6.6 is the Xorg base-lineXORG-MAIN
-rw-r--r--README.sgml656
1 files changed, 656 insertions, 0 deletions
diff --git a/README.sgml b/README.sgml
new file mode 100644
index 0000000..56e2f7a
--- /dev/null
+++ b/README.sgml
@@ -0,0 +1,656 @@
+<!DOCTYPE linuxdoc PUBLIC "-//XFree86//DTD linuxdoc//EN">
+
+<article>
+<title>Mouse Support in XFree86
+<author>Kazutaka Yokota
+<date>28 February 1998
+<toc>
+
+<sect>Introduction <p>
+
+This document describes mouse support in XFree86 3.3.2, whose
+X servers have the revised mouse driver.
+
+Mouse configuration has often been mysterious task for
+novice users.
+However, once you learn several basics, it is straightforward
+to choose options in <tt>XF86Setup</tt> or write the <tt>"Pointer"</tt>
+section in the <tt>XF86Config</tt> file by hand.
+
+<sect>Supported Hardware <p>
+
+XFree86 X servers support three classes of mice:
+serial, bus and PS/2 mice.
+
+<descrip>
+<tag>Serial mouse</tag>
+The serial mouse has been the most popular pointing device for
+PCs.
+There have been numerous serial mouse models from a number of
+manufactures.
+Despite the wide range of variations, there have been relatively
+few protocols (data format) with which the serial mouse talks
+to the host computer.
+
+The modern serial mouse conforms to the PnP COM device specification
+so that the host computer can automatically detect the mouse
+and load an appropriate driver.
+The XFree86 3.3.2 X servers support this specification and can detect
+popular PnP serial mouse models.
+
+<tag>Bus mouse</tag>
+The bus mouse connects to a dedicated interface card in an expansion
+slot.
+Some video cards, notably those from ATI, and integrated I/O
+cards may also have a bus mouse connector.
+Some bus mice are known as `InPort mouse'.
+
+Note that some mouse manufactures have sold a package including a serial mouse
+and a serial interface card.
+Don't confuse this type of products with the genuine bus mouse.
+
+<tag>PS/2 mouse</tag>
+They are sometimes called `Mouse-port mouse'.
+The PS/2 mouse is becoming increasingly common and popular.
+
+The PS/2 mouse is an intelligent device and may have more than
+three buttons and a wheel or a roller.
+The PS/2 mouse is usually compatible with the original PS/2 mouse from IBM
+immediately after power up.
+The PS/2 mouse with additional features requires a specialized
+initialization procedure to enable these features.
+Without proper initialization, it behaves as though it were an ordinary
+two or three button mouse.
+</descrip>
+
+Many mice nowadays can be used both as a serial mouse and as a PS/2 mouse.
+They has a logic to distinguish which interface it is connected to.
+However, the mouse which is not marketed as compatible with both
+serial and PS/2 mouse interface lacks this logic and cannot be
+used in such a way, even if you can find an appropriate
+adapter with which you can connect the PS/2 mouse to a serial port
+or visa versa.
+
+XFree86 now supports the mouse with a wheel, a roller or a knob.
+Its action is detected as the Z (third) axis motion of the mouse.
+As the X server or clients normally do not use the Z axis movement of the
+pointing device, a new configuration option, <tt>ZAxisMapping</tt>,
+is provided to assign the Z axis movement to another axis or a pair
+of buttons (see below).
+
+<sect>OS Support for Mice <p>
+
+<sect1>Summary of Supported Mouse Protocol Types <p>
+<verb>
+ Protocol Types
+ serial PnP BusMouse PS/2 Extended PS/2
+OS platforms protocols serial protocol protocol protocols
+ "Auto" "BusMouse" "PS/2" "xxxPS/2"
+--------------------------------------------------------------------
+BSD/OS Ok ? ? ? ?
+FreeBSD Ok Ok Ok Ok SP*1
+FreeBSD(98) Ok ? Ok NA NA
+Interactive Unix Ok NA ?*1 ?*1 NA
+Linux Ok Ok Ok Ok Ok
+Linux/98 Ok ? Ok NA NA
+LynxOS Ok NA Ok Ok NA
+NetBSD Ok Ok Ok SP*1 NA
+NetBSD/pc98 Ok ? Ok NA NA
+OpenBSD Ok Ok Ok Ok*1 NA
+OS/2 SP*2 SP*2 SP*2 SP*2 SP*2
+SCO Ok ? SP*1 SP*1 NA
+Solaris 2.x Ok NA*1 ?*1 Ok NA
+SVR4 Ok NA*1 SP*1 SP*1 NA
+PANIX Ok ? SP*1 SP*1 NA
+
+Ok: support is available, NA: not available, ?: untested or unknown.
+SP: support is available in a different form
+
+*1 Refer to the following sections for details.
+*2 XFree86/OS2 will support any type of mouse that the OS supports,
+ whether it is serial, bus mouse, or PnP type.
+
+</verb>
+
+<sect1>BSD/OS <p>
+No testing has been done with BSD/OS.
+
+<sect1>FreeBSD <p>
+FreeBSD supports the <tt>"SysMouse"</tt> protocol which must be
+specified when the <tt>moused</tt> daemon is running in versions 2.2.1
+or later.
+
+FreeBSD versions 2.2.5 or earlier do not support extended PS/2
+mouse protocols (<tt>"xxxPS/2"</tt>).
+Always specify the <tt>"PS/2"</tt> protocol for any PS/2 mouse
+in these versions regardless of the brand of the mouse.
+
+FreeBSD versions 2.2.6 or later include the kernel-level
+support for these mice.
+Specify the <tt>"PS/2"</tt> or <tt>"Auto"</tt> protocol and
+the X server will automatically make use of the kernel-level support.
+In fact, you may always specify <tt>"Auto"</tt> to any mouse in these
+versions unless the mouse is an old serial model which doesn't support PnP.
+
+<sect1>FreeBSD(98) <p>
+The PS/2 mouse is not supported.
+
+<sect1>Interactive Unix <p>
+The PnP serial mouse support (the <tt>"Auto"</tt> protocol) is not
+supported for the moment.
+
+The bus mouse and PS/2 mouse should be supported by using the
+appropriate device drivers.
+Use <tt>/dev/mouse</tt> for the <tt>"BusMouse"</tt> protocol
+and <tt>/dev/kdmouse</tt> for the <tt>"PS/2"</tt> protocol.
+These protocols are untested but may work.
+Please send success/failure reports to
+<it/&lt;michael.rohleder@stadt-frankfurt.de&gt;/.
+
+<sect1>Linux <p>
+All protocol types should work.
+
+<sect1>Linux/98 <p>
+The PS/2 mouse is not supported.
+
+<sect1>LynxOS <p>
+The PnP serial mouse support (the <tt>"Auto"</tt> protocol) is disabled in
+LynxOS, because of limited TTY device driver functionality.
+
+<sect1>NetBSD <p>
+NetBSD does not support extended PS/2 mouse protocols (<tt>"xxxPS/2"</tt>).
+The PS/2 mouse device driver <tt>/dev/pms</tt> emulates the bus mouse.
+Therefore, you should always specify the <tt>"BusMouse"</tt> protocol for
+any PS/2 mouse regardless of the brand of the mouse.
+
+<sect1>NetBSD/pc98 <p>
+The PS/2 mouse is not supported.
+
+<sect1>OpenBSD <p>
+OpenBSD does not support extended PS/2 mouse protocols (<tt>"xxxPS/2"</tt>).
+
+The PS/2 mouse device driver <tt>/dev/pms</tt> emulates the bus mouse.
+Specify the <tt>"BusMouse"</tt> protocol for
+any PS/2 mouse regardless of the brand of the mouse when using this device.
+
+The raw PS/2 mouse device driver <tt>/dev/psm</tt> uses the standard PS/2
+mouse protocol.
+Therefore, you should specify the <tt>"PS/2"</tt> protocol for
+any PS/2 mouse regardless of the brand of the mouse when using this device.
+
+<sect1>OS/2 <p>
+XFree86/OS2 always uses the native mouse driver of the operating system
+and will support any type of pointer that the OS supports, whether it is
+serial, bus mouse, or PnP type.
+If the mouse works under Presentation Manager,
+it will also work under XFree86/OS2.
+
+Always specify <tt>"OSMouse"</tt> as the protocol type.
+
+<sect1>SCO <p>
+The bus and PS/2 mouse are supported with the <tt>"OSMouse"</tt>
+protocol type.
+
+The <tt>"OSMouse"</tt> may also be used with the serial mouse.
+
+<sect1>Solaris <p>
+Testing has been done with Solaris 2.5.1 and 2.6. Logitech and
+Microsoft bus mice
+have not been tested, but might work with the <tt>/dev/logi</tt> and
+<tt>/dev/msm</tt> devices.
+Standard 2 and 3 button PS/2 mice work with the <tt>"PS/2"</tt> protocol
+type and the <tt>/dev/kdmouse</tt> device.
+The PnP serial mouse support (the <tt>"Auto"</tt> protocol) has been tested
+and does not work.
+
+<sect1>SVR4 <p>
+The bus and PS/2 mouse may be supported with the <tt>"Xqueue"</tt>
+protocol type.
+
+The <tt>"Xqueue"</tt> may also be used with the serial mouse.
+
+The PnP serial mouse support (the <tt>"Auto"</tt> protocol) is not
+tested.
+
+<sect1>PANIX <p>
+The PC/AT version of PANIX supports the bus and PS/2 mouse with the
+<tt>"Xqueue"</tt> protocol type.
+The PC-98 version of PANIX supports the bus mouse with the
+<tt>"Xqueue"</tt> protocol type.
+
+<sect>Configuring Your Mouse <p>
+
+Before using the <tt>XF86Setup</tt> or <tt>xf86config</tt> programs
+to set up mouse configuration, you must identify the interface type,
+the device name and the protocol type of your mouse.
+Blindly trying every possible combination of mouse settings
+will lead you nowhere.
+
+The first thing you need to know is the interface type
+of the mouse you are going to use.
+It can be determined by looking at the connector of the mouse.
+The serial mouse has a D-Sub female 9- or 25-pin connector.
+The bus mice have either a D-Sub male 9-pin connector
+or a round DIN 9-pin connector.
+The PS/2 mouse is equipped with a small, round DIN 6-pin connector.
+Some mice come with adapters with which the connector can
+be converted to another. If you are to use such an adapter,
+remember that the connector at the very end of the mouse/adapter pair is
+what matters.
+
+The next thing to decide is a device node to use for the given interface.
+For the bus and PS/2 mice, there is little choice;
+your OS most possibly offers just one device node each
+for the bus mouse and PS/2 mouse.
+There may be more than one serial port to which the serial
+mouse can be attached.
+
+The next step is to guess the appropriate protocol type for the mouse.
+The X server may be able to select a protocol type for the given mouse
+automatically in some cases.
+Otherwise, the user has to choose one manually.
+Follow the guidelines below.
+
+<descrip>
+<tag>Bus mouse</tag>
+The bus and InPort mice always use <tt>"BusMouse"</tt>
+protocol regardless of the brand of the mouse.
+
+Some OSs may allow you to specify <tt>"Auto"</tt> as the
+protocol type for the bus mouse.
+
+<tag>PS/2 mouse</tag>
+The <tt>"PS/2"</tt> protocol should always be tried first for the PS/2 mouse
+regardless of the brand of the mouse.
+Any PS/2 mouse should work with this protocol type, although
+wheels and other additional features are unavailable in the
+X server.
+
+After verifying the mouse works with this protocol,
+you may choose to specify one of <tt>"xxxPS/2"</tt> protocols so that
+extra features are made available in the X server.
+However, support for these PS/2 mice assumes certain behavior of
+the underlying OS and may not always work as expected.
+Support for some PS/2 mouse models may be disabled all together
+for some OS platforms for this reason.
+
+Some OSs may allow you to specify <tt>"Auto"</tt> as the
+protocol type for the PS/2 mouse and the X server will automatically
+adjust itself.
+
+<tag>Serial mouse</tag>
+The XFree86 server supports a wide range of mice, both old and new.
+If your mouse is of a relatively new model, it may conform to the
+PnP COM device specification and the X server may be able to
+detect an appropriate protocol type for the mouse automatically.
+
+Specify <tt>"Auto"</tt> as the protocol type and start the X server.
+If the mouse is not a PnP mouse, or the X server cannot determine
+a suitable protocol type, the server will print the following
+error message and abort.
+
+<verb>
+xf86SetupMouse: Cannot determine the mouse protocol
+</verb>
+
+If the X server generates the above error message, you need to
+manually specify a protocol type for your mouse.
+Choose one from the following list:
+
+<itemize>
+ <item><tt>GlidePoint</tt>
+ <item><tt>IntelliMouse</tt>
+ <item><tt>Logictech</tt>
+ <item><tt>Microsoft</tt>
+ <item><tt>MMHittab</tt>
+ <item><tt>MMSeries</tt>
+ <item><tt>MouseMan</tt>
+ <item><tt>MouseSystems</tt>
+ <item><tt>ThinkingMouse</tt>
+</itemize>
+
+When you choose, keep in mind the following rule of thumb:
+
+<enum>
+<item><tt>"Logitech"</tt> protocol is for old serial mouse models
+from Logitech.
+Modern Logitech mice use either <tt>"MouseMan"</tt> or <tt>"Microsoft"</tt>
+protocol.
+<item>Most 2-button serial mice support the <tt>"Microsoft"</tt> protocol.
+<item>3-button serial mice may work with the <tt>"Mousesystems"</tt>
+protocol. If it doesn't, it may work instead with the
+<tt>"Microsoft"</tt> protocol although the third (middle) button won't
+function.
+3-button serial mice may also work with the <tt>"Mouseman"</tt>
+protocol under which the third button may function as expected.
+<item>3-button serial mice may have a small switch at the bottom
+of the mouse to choose between ``MS'' and ``PC'', or ``2'' and ``3''.
+``MS'' or ``2'' usually mean the <tt>"Microsoft"</tt> protocol.
+``PC'' or ``3'' will choose the <tt>"MouseSystems"</tt> protocol.
+<item>If the serial mouse has a roller or a wheel, it may be compatible
+with the <tt>"IntelliMouse"</tt> protocol.
+<item>If the serial mouse has a roller or a wheel and it doesn't work
+with the <tt>"IntelliMouse"</tt> protocol, you have to use it
+as a regular 2- or 3-button serial mouse.
+</enum>
+
+If the <tt>"Auto"</tt> protocol is specified and the mouse seems working,
+but you find that not all features of the mouse is available, that is
+because the X server does not have native support for that model of mouse
+and is using a ``compatible'' protocol according to PnP information.
+
+If you suspect this is the case with your mouse, please send report to
+<it/&lt;XFree86@XFree86.Org&gt;/.
+
+<tag>Standardized protocols</tag>
+Mouse device drivers in your OS may use the standardized protocol
+regardless of the model or the class of the mouse.
+For example, SVR4 systems may support <tt>"Xqueue"</tt> protocol.
+In FreeBSD the system mouse device <tt>/dev/sysmouse</tt>
+uses the <tt>"SysMouse"</tt> protocol.
+Please refer to the OS support section of this file for more information.
+
+</descrip>
+
+<sect>XF86Config Options <p>
+
+The following new options are available for the <tt>Pointer</tt> section
+of the <tt>XF86Config</tt> file.
+
+<sect1>Buttons <p>
+This option tells the X server the number of buttons on the mouse.
+Currently there is no reliable way to automatically detect the correct
+number.
+This option is the only means for the X server to obtain it.
+The default value is three.
+
+Note that if you intend to assign Z axis movement to button events
+using the <tt>ZAxisMapping</tt> option below, you need to take account
+of those buttons into <tt>N</tt> too.
+
+<verb>
+ Buttons N
+</verb>
+
+<sect1>ZAxisMappping <p>
+This option maps the Z axis (wheel) motion to a pair of buttons or to
+another axis.
+
+<verb>
+ ZAxisMapping X
+ ZAxisMapping Y
+ ZAxisMapping N M
+</verb>
+
+The first example will map the Z axis motion to the X axis motion.
+Whenever the user moves the wheel/roller, its movement is reported as
+the X axis motion. When the wheel/roller stays still, the real X axis
+motion is reported as is. The last example will map negative Z axis
+motion to the button <tt>N</tt> and positive Z axis motion to
+the button <tt>M</tt>. If this option is used and the buttons <tt>N</tt>
+or <tt>M</tt> actually exists in the mouse,
+their actions won't be detected by the X server.
+
+Currently this option can not be set in the <tt>XF86Setup</tt> program.
+You need to edit the <tt>XF86Config</tt> file by hand to add this option.
+
+<sect1>Resolution <p>
+The following option will set the mouse device resolution to <tt>N</tt>
+counts per inch, if possible:
+
+<verb>
+ Resolution N
+</verb>
+
+Not all mice and OSs can support this option.
+This option can be set in the <tt>XF86Setup</tt> program.
+
+<sect>Mouse Gallery <p>
+
+<sect1>MS IntelliMouse (serial, PS/2) <p>
+This mouse has been supported since XFree86 3.3.
+However, support in 3.3.2 is slightly different;
+the wheel movement is recognized as the Z axis motion.
+This behavior is not compatible with XFree86
+3.3, but is more consistent with the support for other mice with
+wheels or rollers.
+If you want to make the wheel behave like before,
+you can use the new option <tt>"ZAxisMapping"</tt> as described above.
+<p>
+IntelliMouse supports the PnP COM device specification.
+<p>
+To use this mouse as a serial device:
+<verb>
+ Protocol "Auto" or "IntelliMouse"
+ Device "/dev/xxxx" (where xxxx is a serial port)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports PS/2 mouse
+initialization:
+<verb>
+ Protocol "IMPS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device but the OS does not support PS/2 mouse
+initialization (the wheel won't work in this case):
+<verb>
+ Protocol "PS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports automatic
+PS/2 mouse detection:
+<verb>
+ Protocol "Auto"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+<sect1>Kensington Thinking Mouse (serial, PS/2) <p>
+This mouse has four buttons.
+Thinking Mouse supports the PnP COM device specification.
+<p>
+To use this mouse as a serial device:
+<verb>
+ Protocol "Auto" or "ThinkingMouse"
+ Device "/dev/xxxx" (where xxxx is a serial port)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports PS/2 mouse
+initialization:
+<verb>
+ Protocol "ThinkingMousePS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device but the OS does not support PS/2 mouse
+initialization (the third and the fourth buttons act as though they
+were the first and the second buttons):
+<verb>
+ Protocol "PS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports automatic
+PS/2 mouse detection:
+<verb>
+ Protocol "Auto"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+<sect1>Genius NetScroll (PS/2) <p>
+This mouse has four buttons and a roller. The roller movement is
+recognized as the Z axis motion.
+<p>
+To use this mouse as the PS/2 device and the OS supports PS/2 mouse
+initialization:
+<verb>
+ Protocol "NetScrollPS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device but the OS does not support PS/2 mouse
+initialization (the roller and the fourth button won't work):
+<verb>
+ Protocol "PS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports automatic
+PS/2 mouse detection:
+<verb>
+ Protocol "Auto"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+<sect1>Genius NetMouse and NetMouse Pro (serial, PS/2) <p>
+These mice have a "magic button" which is used like a wheel or a
+roller. The "magic button" action is recognized as the Z axis motion.
+NetMouse Pro is identical to NetMouse except that it has the third
+button on the left hand side.
+<p>
+NetMouse and NetMouse Pro support the PnP COM device specification.
+When used as a serial mouse, they are compatible with MS IntelliMouse.
+<p>
+To use these mice as a serial device:
+<verb>
+ Protocol "Auto" or "IntelliMouse"
+ Device "/dev/xxxx" (where xxxx is a serial port)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports PS/2 mouse
+initialization:
+<verb>
+ Protocol "NetMousePS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device but the OS does not support PS/2 mouse
+initialization (the "magic button" and the third button won't work):
+<verb>
+ Protocol "PS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports automatic
+PS/2 mouse detection:
+<verb>
+ Protocol "Auto"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+<sect1>ALPS GlidePoint (serial, PS/2) <p>
+The serial version of this pad device has been supported since XFree86
+3.2. `Tapping' action is interpreted as the fourth button press.
+(IMHO, the fourth button of GlidePoint should always be mapped to the first
+button in order to make this pad behave like the other pad products.)
+<p>
+To use this pad as a serial device:
+<verb>
+ Protocol "GlidePoint"
+ Device "/dev/xxxx" (where xxxx is a serial port)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports PS/2 mouse
+initialization:
+<verb>
+ Protocol "GlidePointPS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device but the OS does not support PS/2 mouse
+initialization:
+<verb>
+ Protocol "PS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports automatic
+PS/2 mouse detection:
+<verb>
+ Protocol "Auto"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+<sect1>ASCII MieMouse (serial, PS/2) <p>
+This mouse appears to be OEM from Genius. Although its shape is
+quite different, it works like Genius NetMouse Pro. This mouse has a
+"knob" which is used like a wheel or a roller. The "knob" action is
+recognized as the Z axis motion.
+<p>
+MieMouse supports the PnP COM device specification. When used as a
+serial mouse, it is compatible with MS IntelliMouse.
+<p>
+To use this mouse as a serial device:
+<verb>
+ Protocol "Auto" or "IntelliMouse"
+ Device "/dev/xxxx" (where xxxx is a serial port)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports PS/2 mouse
+initialization:
+<verb>
+ Protocol "NetMousePS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device but the OS does not support PS/2 mouse
+initialization (the knob and the third button won't work):
+<verb>
+ Protocol "PS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports automatic
+PS/2 mouse detection:
+<verb>
+ Protocol "Auto"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+<sect1>Logitech MouseMan+ and FirstMouse+ (serial, PS/2) <p>
+MouseMan+ has two buttons on top, one side button and a roller.
+FirstMouse+ has two buttons and a roller. The roller movement is
+recognized as the Z axis motion. The roller also acts as the third
+button. The side button is recognized as the fourth button.
+<p>
+MouseMan+ and FirstMouse+ support the PnP COM device specification.
+They have MS IntelliMouse compatible mode when used as a serial mouse.
+<p>
+To use these mice as a serial device:
+<verb>
+ Protocol "Auto" or "IntelliMouse"
+ Device "/dev/xxxx" (where xxxx is a serial port)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports PS/2 mouse
+initialization:
+<verb>
+ Protocol "MouseManPlusPS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device but the OS does not support PS/2 mouse
+initialization (the wheel and the fourth button won't work):
+<verb>
+ Protocol "PS/2"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+To use this mouse as the PS/2 device and the OS supports automatic
+PS/2 mouse detection:
+<verb>
+ Protocol "Auto"
+ Device "/dev/xxxx" (where xxxx is the PS/2 mouse device)
+</verb>
+
+
+
+<verb>
+$XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/mouse.sgml,v 1.1.2.8 1998/03/02 09:58:25 dawes Exp $
+
+
+
+$Xorg: mouse.sgml,v 1.3 2000/08/17 19:51:07 cpqbld Exp $
+</verb>
+</article>