diff options
| author | Hoegeun Kwon <hoegeun.kwon@samsung.com> | 2017-03-08 10:42:35 +0900 |
|---|---|---|
| committer | Thierry Reding <treding@nvidia.com> | 2017-04-06 23:30:55 +0200 |
| commit | fae50924f92ce3f5d422c8e619e01a36285a3181 (patch) | |
| tree | 6ecbe51a9e617d798f4e6dbd77f313711895eaf5 | |
| parent | 966fea78adf23339fa73d6cdbcd9cd96a57c92b7 (diff) | |
dt-bindings: Add support for Samsung s6e3ha2 panel binding
The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected using
MIPI-DSI interfaces.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
| -rw-r--r-- | Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt new file mode 100644 index 000000000000..18854f4c8376 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt @@ -0,0 +1,28 @@ +Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel + +Required properties: + - compatible: "samsung,s6e3ha2" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: I/O voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin (active low) + - enable-gpios: a GPIO spec for the panel enable pin (active high) + +Optional properties: + - te-gpios: a GPIO spec for the tearing effect synchronization signal + gpio pin (active high) + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; +}; |