migrate dbaccess subsequenttests to gbuild

5 files changed, 95 insertions, 77 deletions

diff --git a/dbaccess/JunitTest_dbaccess_unoapi.mk b/dbaccess/JunitTest_dbaccess_unoapi.mk
new file mode 100644
index 000000000..149297756
--- /dev/null
+++ b/dbaccess/JunitTest_dbaccess_unoapi.mk
@@ -0,0 +1,49 @@
+# Version: MPL 1.1 / GPLv3+ / LGPLv3+
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License or as specified alternatively below. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Initial Developer of the Original Code is
+#       Bjoern Michaelsen, Canonical Ltd. <bjoern.michaelsen@canonical.com>
+# Portions created by the Initial Developer are Copyright (C) 2010 the
+# Initial Developer. All Rights Reserved.
+#
+# Major Contributor(s):
+#
+# For minor contributions see the git repository.
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 3 or later (the "GPLv3+"), or
+# the GNU Lesser General Public License Version 3 or later (the "LGPLv3+"),
+# in which case the provisions of the GPLv3+ or the LGPLv3+ are applicable
+# instead of those above.
+
+$(eval $(call gb_JunitTest_JunitTest,dbaccess_unoapi))
+
+$(eval $(call gb_JunitTest_set_defs,dbaccess_unoapi,\
+    $$(DEFS) \
+    -Dorg.openoffice.test.arg.sce=$(SRCDIR)/dbaccess/qa/unoapi/dbaccess.sce \
+    -Dorg.openoffice.test.arg.xcl=$(SRCDIR)/dbaccess/qa/unoapi/knownissues.xcl \
+    -Dorg.openoffice.test.arg.tdoc=$(SRCDIR)/dbaccess/qa/unoapi/testdocuments \
+))
+
+$(eval $(call gb_JunitTest_add_jars,dbaccess_unoapi,\
+    $(OUTDIR)/bin/OOoRunner.jar \
+    $(OUTDIR)/bin/ridl.jar \
+    $(OUTDIR)/bin/test.jar \
+    $(OUTDIR)/bin/unoil.jar \
+    $(OUTDIR)/bin/jurt.jar \
+))
+
+$(eval $(call gb_JunitTest_add_classes,dbaccess_unoapi,\
+    org.openoffice.test.UnoApiTest \
+))
+
+# vim: set noet sw=4 ts=4:
diff --git a/dbaccess/qa/unoapi/makefile.mk b/dbaccess/Makefile
index 41ed9480f..a79aff831 100644
--- a/dbaccess/qa/unoapi/makefile.mk
+++ b/dbaccess/Makefile
@@ -1,6 +1,7 @@
 #*************************************************************************
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+# 
 # Copyright 2000, 2010 Oracle and/or its affiliates.
 #
 # OpenOffice.org - a multi-platform office productivity suite
@@ -21,28 +22,17 @@
 # version 3 along with OpenOffice.org.  If not, see
 # <http://www.openoffice.org/license.html>
 # for a copy of the LGPLv3 License.
-#***********************************************************************/
-
-.IF "$(OOO_SUBSEQUENT_TESTS)" == ""
-nothing .PHONY:
-.ELSE
-
-PRJ = ../..
-PRJNAME = dbaccess
-TARGET = qa_unoapi
+#
+#*************************************************************************
 
-.IF "$(OOO_JUNIT_JAR)" != ""
-PACKAGE = org/openoffice/dbaccess/qa/unoapi
-JAVATESTFILES = Test.java
-JAVAFILES = $(JAVATESTFILES)
-JARFILES = OOoRunner.jar ridl.jar test.jar
-EXTRAJARFILES = $(OOO_JUNIT_JAR)
-.END
+ifeq ($(strip $(SOLARENV)),)
+$(error No environment set!)
+endif
 
-.INCLUDE: settings.mk
-.INCLUDE: target.mk
-.INCLUDE: installationtest.mk
+gb_PARTIALBUILD := T
+GBUILDDIR := $(SOLARENV)/gbuild
+include $(GBUILDDIR)/gbuild.mk
 
-ALLTAR : javatest
+$(eval $(call gb_Module_make_global_targets,$(shell ls $(dir $(realpath $(firstword $(MAKEFILE_LIST))))/Module*.mk)))
 
-.END
+# vim: set noet sw=4 ts=4:
diff --git a/dbaccess/Module_dbaccess.mk b/dbaccess/Module_dbaccess.mk
new file mode 100644
index 000000000..df8996cba
--- /dev/null
+++ b/dbaccess/Module_dbaccess.mk
@@ -0,0 +1,34 @@
+# Version: MPL 1.1 / GPLv3+ / LGPLv3+
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License or as specified alternatively below. You may obtain a copy of
+# the License at http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Initial Developer of the Original Code is
+#       Bjoern Michaelsen, Canonical Ltd. <bjoern.michaelsen@canonical.com>
+# Portions created by the Initial Developer are Copyright (C) 2010 the
+# Initial Developer. All Rights Reserved.
+#
+# Major Contributor(s):
+#
+# For minor contributions see the git repository.
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 3 or later (the "GPLv3+"), or
+# the GNU Lesser General Public License Version 3 or later (the "LGPLv3+"),
+# in which case the provisions of the GPLv3+ or the LGPLv3+ are applicable
+# instead of those above.
+
+$(eval $(call gb_Module_Module,dbaccess))
+
+$(eval $(call gb_Module_add_subsequentcheck_targets,dbaccess,\
+    JunitTest_dbaccess_unoapi \
+))
+
+# vim: set noet ts=4 sw=4:
diff --git a/dbaccess/prj/build.lst b/dbaccess/prj/build.lst
index ed7603cd4..c0c9f8fb9 100644
--- a/dbaccess/prj/build.lst
+++ b/dbaccess/prj/build.lst
@@ -27,9 +27,6 @@ ba	dbaccess\source\ui\imagelists			nmake	-	all	ba_uiimglst ba_inc NULL
 ba  dbaccess\util                           nmake   -   all ba_util ba_uiimglst ba_capi ba_cdaccess ba_cmisc ba_crecovery ba_shared ba_uibrowser ba_uiapp ba_uicontrol ba_uidlg ba_uimisc ba_uiquery ba_uitabledesign ba_uirelationdesign ba_uiuno ba_conntools ba_misctools ba_miscres ba_ext_adabasui NULL
 ba  dbaccess\win32\source\odbcconfig        nmake   -   w ba_odbcconfig ba_inc NULL
 
-# fd#35693 disabled because it hangs on exit
-#ba dbaccess\qa\unoapi nmake - all ba_q_unoapi NULL
-
 # complex tests doesn't work
 # ba dbaccess\qa\complex\dbaccess           nmake   -   all ba_qa_complex NULL
 
diff --git a/dbaccess/qa/unoapi/Test.java b/dbaccess/qa/unoapi/Test.java
deleted file mode 100644
index 4f2409fdc..000000000
--- a/dbaccess/qa/unoapi/Test.java
+++ /dev/null
@@ -1,52 +0,0 @@
-/*************************************************************************
-* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-*
-* Copyright 2000, 2010 Oracle and/or its affiliates.
-*
-* OpenOffice.org - a multi-platform office productivity suite
-*
-* This file is part of OpenOffice.org.
-*
-* OpenOffice.org is free software: you can redistribute it and/or modify
-* it under the terms of the GNU Lesser General Public License version 3
-* only, as published by the Free Software Foundation.
-*
-* OpenOffice.org is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU Lesser General Public License version 3 for more details
-* (a copy is included in the LICENSE file that accompanied this code).
-*
-* You should have received a copy of the GNU Lesser General Public License
-* version 3 along with OpenOffice.org.  If not, see
-* <http://www.openoffice.org/license.html>
-* for a copy of the LGPLv3 License.
-************************************************************************/
-
-package org.openoffice.dbaccess.qa.unoapi;
-
-import org.openoffice.Runner;
-import org.openoffice.test.OfficeConnection;
-import static org.junit.Assert.*;
-
-public final class Test {
-    @org.junit.Before public void setUp() throws Exception {
-        connection.setUp();
-    }
-
-    @org.junit.After public void tearDown()
-        throws InterruptedException, com.sun.star.uno.Exception
-    {
-        connection.tearDown();
-    }
-
-    @org.junit.Test public void test() {
-        assertTrue(
-            Runner.run(
-                "-sce", "dbaccess.sce", "-xcl", "knownissues.xcl", "-ini",
-                "dbaccess.props", "-tdoc", "testdocuments", "-cs",
-                connection.getDescription()));
-    }
-
-    private final OfficeConnection connection = new OfficeConnection();
-}