0. Maintenance Notice --------------------- This code is unmaintained. You can use it at your own risk. If you want to integrate video display in your QML-based UI, you should consider using 'qmlglsink', from gst-plugins-good. This is a well supported video sink that uses the generic gstreamer-gl stack and is in many ways superior to 'qtquick2videosink' that is provided by qt-gstreamer. You can use this code as an example: https://cgit.freedesktop.org/gstreamer/gst-plugins-good/tree/tests/examples/qt/qmlsink If you are not interested in using QML in your UI, then you may use one of the other elements provided by this module (see below). If you do that, it would be helpful to let us know that this code is still useful to you. We may consider adding these elements in one of the core gstreamer modules. If you are here for the Qt-style bindings, I'm sorry to disappoint you. The alternative is to use the C API, or the GStreamermm C++ API. Qt-style bindings are cool, but unfortunately they are very hard to maintain because they are written by hand. If you are interested in continuing this project, you are welcome to implement a generator for them, probably based on GObject-Introspection. I am happy to provide directions if you want to pursue such a thing. 1. About -------- QtGStreamer is a set of libraries and plugins providing C++ bindings for GStreamer [1] with a Qt-style API plus some helper classes for integrating GStreamer better in Qt [2] applications. Currently, it consists of the following parts: * QtGLib - Library providing C++/Qt bindings for parts of the GLib and GObject APIs, a base on which QtGStreamer is built. * QtGStreamer - Library providing C++/Qt bindings for GStreamer * QtGStreamerUi - Library providing integration with QtWidgets. Currently, it only provides a video widget that embeds GStreamer's video sinks. * QtGStreamerUtils - Library providing some high level utility classes. * QtGStreamerQuick - Library providing integration with QtQuick (Qt5 only). In addition, it provides GStreamer elements for painting video on Qt surfaces: * qwidgetvideosink - For painting on QWidgets * qtvideosink - For painting on any surface with QPainter * qtglvideosink - For painting on any surface with QPainter and OpenGL * qtquick2videosink - For painting on QtQuick2 surfaces (Qt5 only) [1]. http://gstreamer.freedesktop.org/ [2]. http://qt-project.org/ 2. Building ----------- 2.1 Dependencies ---------------- QtGStreamer requires the following software to be installed in order to build: * CMake 2.8.9 or later * GStreamer 1.0.0 or later With its dependencies: - Glib / GObject and including gstreamer-plugins-base (1.0.0 or later) * Qt4 or Qt5 (4.7 or later / 5.0 or later) * Boost 1.39 or later * Flex (only if QTGSTREAMER_CODEGEN=ON, see below) * Bison (only if QTGSTREAMER_CODEGEN=ON, see below) In addition, if gcc is used as the compiler, libstdc++ version 4.5 or later is required at runtime. This is due to a bug in earlier versions of libstdc++ that sometimes makes dynamic_cast fail under conditions where it should not. 2.2 Compiler ------------ Note: This paragraph is outdated. It was written at a time where C++11 support was not very widespread among compilers. Nowadays, any C++11 capable compiler should work fine. A decent compiler with proper support for advanced templates, including features such as partial template specialization, is required. QtGStreamer can also make use of C++0x features (see below for details). A compiler supporting at least some of them is recommended. Currently, only the GNU C++ compiler (g++) version 4.5 or later is known to support all the features that QtGStreamer uses. However, other compilers can be used too, but with some limitations. C++0x features in use: * static_assert(). Used to show nice error messages when the programmer is trying to use some template in the wrong way. If not present, the templates will still fail to compile if used in the wrong way, but the error messages may be quite weird to understand... * Variadic templates together with rvalue references. Used to support connecting and emitting GObject signals with any number of arguments. If not available, a hack-ish implementation using boost's preprocessor library, boost::function and boost::bind is used to provide support for up to 9 arguments. 2.3 Procedure ------------- The build procedure is simple: $ mkdir build && cd build $ cmake .. -DCMAKE_INSTALL_PREFIX=/path/to/installation/prefix $ make $ make install Other options that can be passed to cmake include: * -DCMAKE_BUILD_TYPE=[Debug|Release|RelWithDebInfo|MinSizeRel] Allows you to specify the type of the build. This is a standard cmake option, see the cmake man page for details. * -DQT_VERSION=[4|5] Allows you to specify the Qt version that you want to build against. The default is 4. * -DQTGSTREAMER_STATIC=[ON|OFF] Allows you to choose whether to build static or dynamic libraries. ON means static, OFF means dynamic. * -DQTGSTREAMER_EXAMPLES=[ON|OFF] Allows you to choose whether to build the examples shipped with QtGStreamer or not. Note that the examples can also be built independently outside the source tree. * -DQTGSTREAMER_TESTS=[ON|OFF] Allows you to choose whether to build tests or not. * -DQTGSTREAMER_CODEGEN=[ON|OFF] Allows you to choose whether to build and use the QtGStreamer code generator or not. This code generator generates some extra code based on the QtGlib/QtGStreamer headers. This extra code is required, but it is also shipped in the source tree, so it is not necessary to regenerate it, unless you are developing QtGStreamer and you are making changes to the headers. If you are crosscompiling, you should make sure to turn this feature off, since this will compile codegen for the target architecture and then try to run it, which will fail. * -DUSE_GST_PLUGIN_DIR=[ON|OFF] Allows you to choose whether to install plugin together with the rest of the gstreamer plugins or whether to install them in the same prefix as QtGStreamer. You will probably want to set this to OFF if you are installing in a prefix different than GStreamer (say somewhere in $HOME) while GStreamer is installed in a system location and you don't want to gain root privileges to do "make install". * -DUSE_QT_PLUGIN_DIR=[ON|OFF] Same as USE_GST_PLUGIN_DIR, but for Qt (QML) plugins. * -DGST_PACKAGE_NAME="some string" Allows you to specify the name that gst-inspect will show as the "Binary package" name for all the element plugins that are build from this source package. * -DGST_PACKAGE_ORIGIN="http://some.url" Allows you to specify the url that gst-inspect will show as the "Origin URL" for all the element plugins that are build from this source package. 2.4 Parallel installation ------------------------- QtGStreamer can be built both with Qt4 and Qt5. Installing both versions in parallel is possible, since all the libraries, directories and plugins are named differently. Parallel installation is also possible, to a certain extent, between the GStreamer-0.10 based version and the GStreamer-1.0 based version. The libraries and the GStreamer plugins are co-installable, however the QML plugins as well as the headers are NOT. 2.5 Generating documentation ---------------------------- QtGStreamer uses doxygen for documentation. To generate the documentation you need to install doxygen and run "make doc" after you have run cmake. This will generate the documentation in /doc/html/. 2.6 Running tests ----------------- QtGStreamer comes with a suite of automatic unit tests that ensure QtGStreamer is working properly. To run them you will need ctest, a tool that comes with cmake, plus some gstreamer plugins from the base and good sets. To run them, simply invoke "make test" or "ctest" in the build directory. For advanced usage, refer to the ctest manual page. 2.7 Checking build system integrity ----------------------------------- In order to check if the installed build system files (QtGStreamerConfig.cmake, pkg-config files, etc) are correct and usable externally, you can run: $ make examples_distcheck This checks compilation of the examples with both cmake and qmake. Note that you should also set your environment accordingly for cmake and qmake to be able to find QtGStreamer. For example, on my debian system where I have installed the Qt5 version of QtGStreamer in /home/gkiagia/install, I would have to do: $ export QT_SELECT=5 # for debian's qmake wrapper to work with Qt5 $ export PKG_CONFIG_PATH=/home/gkiagia/install/lib/x86_64-linux-gnu/pkgconfig/ $ export CMAKE_PREFIX_PATH=/home/gkiagia/install/ $ make examples_distcheck 3. Links & Contact information ------------------------------ Web: http://gstreamer.freedesktop.net http://gstreamer.freedesktop.org/wiki/QtGStreamer Mailing list: mailto:gstreamer-devel@lists.freedesktop.org Irc channels: irc://irc.freenode.net/gstreamer Git repository: http://cgit.freedesktop.org/gstreamer/qt-gstreamer/ Bugs, feature requests & patches should be sent at: https://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer&component=qt-gstreamer **Note**: This component has been closed as of May 5, 2018. See the maintenance notice at the top of this file -- George Kiagiadakis Last updated: May 5, 2018